Bryton Rider 20+ User manual

Quick Start Guide
20

2
EN
Key Functions
Rider 20
Rider 20 has three keys that are used for multiple functions.
LAP (2)
To turn o the device, long press to enter•
Menu and select “OFF( ) ”.
Long press to access/leave menu.•
When riding and recording, short press•
to mark the lap.
In Menu, short press to enter or conrm•
a selection.
UP (1)
Long press to turn the backlight on/o.•
In meter view, short press to scroll upper•
screen page options.
In Menu, short press to move up to scroll•
through menu options.
DOWN (3)
In meter view, short press to scroll lower•
screen page options.
In Menu, short press to move down to•
scroll through menu options.
20
LAP
3
Accessories
The Rider 20 comes with the following
accessories:
•USBcable•Bikemount
Optional items:
•Heartratebelt•Combosensor
•Speed/Cadencesensor
2
1

EN
3
Upper screen (A)
Press UP to switch information display:
Currenttime>RideTime(AorB)>Cadence>Cadence(Avg)>Cadence(Max)
Info screen
Displaycurrentspeed>
Speed(Max)>Speed(Avg)
Display Information
Lower screen (B)
Press DOWN to switch information display:
Distance>Calories>ODO(A/B)>ODO(A+B)>TotalRideTime(A/B)>TotalRide
Time(A+B)>HeartRate>HeartRate(Max)>HeartRate(Avg)
Note: ODO (A/B), ODO (A+B), Total Ride Time (A/B), and Total Ride Time (A+B) data
wiIl only be displayed after you have completed a training/exercise.
A
B
Note: During pairing process (with heart rate
monitor/cadence sensor/speed sensor), the LED
indicators (on the top of the icons) will blink. When
the sensors are successfully linked to the device, the
LED indicators will light on.
Indicator
MA=Maximum
AV=Average

4
EN
Getting Started
Connect, Sync, and Charge
1.ConnectRider20toaPCusingthesuppliedUSBcable.
2. Download the Bryton Bridge 2 application at bb.brytonsport.com
and sync with Rider 20.
20
LAP
reset
Keep Rider 20 connected to
thePCtochargethebattery.
UseUSBcabletoconnect
toaPC.
Note: For rst time use, charge the
battery for at least 3 hours.
Icons
Icon Item Solid icon Flashing icon
Bikeicon
Bike1 -
Bike2 -
Batteryicon
Batterylevel Batterycharging
-Batterylow
GPSicon GPSsignallevel SearchingGPSsignal
Record icon Memory full,
must clear storage Recording in progress
Heartrateicon Linked with heart rate
monitor -
Cadencesensor
icon
Linked with
cadence sensor -
Speedsensor
icon
Linked with speed
sensor -

EN
5
Turn On/O
To turn on Rider 20:
ShortpressLAP to turn on Rider 20.
To turn o Rider 20:
1. Long press LAP to enter Menu.
2.ShortpressUP/DOWN to select “OFF
( ) ”.
3.ShortpressLAP to turn o the device.
Note: If Rider 20 is left idle for 10 minutes, it will automatically turn o.
Initial Setup
When turning Rider 20 on for the rst time, the setup wizard appears
on screen. Follow the instructions to complete setup.
1.Selectthedisplaylanguage.
2.Selecttheunitofmeasurement.
3. Enter your “user prole”. It is recommended to input the data. The
data accuracy will highly aect your training analysis.
4.WhenFINDGPSappears,pleasegooutdoorstoacquireGPSsignal.
If not possible to go outdoor, short press LAPtocancelacquiring
request.
Note: If you want to change your prole, please connect your device to
Brytonsport.com and change the setting via My Device -> Manage Device Data.
Or go to SET > Others > Prole and change your settings.

6
EN
Reset Rider 20
To reset the Rider 20, long press all three keys (UP/LAP/DOWN) at the
same time.
Bike Mount Installation
To mount Rider 20 onto your bike, do the following:
1
2
3
LAP
20
LAP
20
4
Ride Your Bike with Rider 20!
• Free ride:
Enjoy the ride with Rider 20 mounted onto your bike.
• Start an exercise and record your data:
Long press LAPtoenterMenu.Choose“START” and short press
LAP to start recording the log.
Start a training:•
Long press LAPtoenterMenu.Choose“SET>TRAIN” and short
press LAP to select from the available training modes: riding time,
distance,andLAP.
Note: To customize your training settings, see User’s Manual for further details.

EN
7
Manage Rider 20 Data via Your Computer
1.ConnectyourRider20toyourcomputerbyusingUSBcable.
2. Install the Bryton Bridge 2 application. You can download the
application at http://bb.brytonsport.com.
3. Follow the on-screen instructions to transfer data to your computer.
Share Your Experience With Other Bikers
Toshareyourexperiencesandtrainingresultwithotherbikersaround
the world, visit http://www.brytonsport.com.
Accessories Installations (Optional)
Heart Rate Monitor
C
L
O
S
E
O
P
E
N
C
L
O
S
E
O
P
E
N
C
L
O
S
E
O
P
E
N
1
2
3
4
5
6
C
L
O
S
E
O
P
E
N

8
EN
Speed/Cadence Sensor
CADENCESPEED
SPEED
SPEED
3
mm
SPEED
SPEED
SPEED
SPEED
20
LAP
SPEED
LAP
20
LAP
20
1
2
3
4
5a
6a
7a
8a
5b
6b
7b
8b
20
LAP
3
mm
CADENCE