Bticino 375006 User manual

375006
375007
375008
375009
04/21-01 PC
LE12696AA
BTicino SpA – Viale Borri, 231 – 21100 Varese – Italy – www.bticino.com
Dimensional data 375006
* Recommended height, unless different regulations are specified.
Installation 375006
To ensure proper operation, the Fingerprint Reader must be installed in a location protected from rain.
384 mm
149 mm
2 mm 58 mm
90 – 130 cm
*
160 – 165 cm
149 mm
384
mm
60 mm

2
Dimensional data 375007
* Recommended height, unless different regulations are specified.
Installation 375007
To ensure proper operation, the Fingerprint Reader must be installed in a location protected from rain.
414,4 mm
183,6 mm
90 – 130 cm
*
160 – 165 cm
2 mm 58 mm
184 mm
415
mm
60 mm

3
Dimensional data 375008
* Recommended height, unless different regulations are specified.
Installation 375008
To ensure proper operation, the Fingerprint Reader must be installed in a location protected from rain.
82 mm
232
mm
62 mm
231,5 mm
81,4 mm
90 – 130 cm
*
160 – 165 cm
2 mm 60 mm

4
Dimensional data 375009
* Recommended height, unless different regulations are specified.
Installation 375009
To ensure proper operation, the Fingerprint Reader must be installed in a location protected from rain.
90 – 130 cm
*
160 – 165 cm
231,5 mm
81,4 mm
2 mm 57 mm
Read carefully before use and keep for future reference
Touching the units with wet hands is forbidden
Using liquid cleaners or aerosols is forbidden
Blocking the ventilation openings is forbidden
Modifying the devices is forbidden
Removing protective parts from the devices is forbidden
Installing the units near liquids and powders is forbidden
Installing the units near heat sources is forbidden
Installing the units near harmful gases, metal dusts or similar is forbidden
Fastening the units on unsuitable surfaces is forbidden
Warnings and consumer rights
Risk of devices falling because the surface on which they are installed collapses or inappropriate installation
Switch the power supply OFF before any work on the system
Caution: Installation, conguration, starting-up and maintenance must be performed exclusively by
qualied personnel.
Check that the wall installation has been carried out correctly
Lay out the wires respecting the standards in force
Connect the power supply wires as indicated
Use only the items indicated in the technical specications for any system expansions
84 mm
178
mm
59 mm