Bticino Axolute Nighter 349320 User manual

09/08-01 PC
349320
349321
User manual

Contents
1 Introduction and Basic Functions 5
General information
■6
Your Video Station: use it now!
■6
Video door entry function key⻬s
Navigation key⻬s
Menu functions■8
Volume adjustment
⻬
Monitor adjustment⻬
Date/Time adjustment⻬
Camera swing⻬
Cleaning glas⻬s
Bells adjustment⻬
Paging⻬
2 Trouble shooting 17
Push to Tal⻬k mode
3 CCTV functions 21
Activation
■22
Intercommunication■22
Camera■23
Cycle cameras■23
4 House automation functions 25
Scenarios
■26
Alarms
■27
Sound system■28
Temperature control■29
Multimedia menu■31
5 Services 33
The “Settings” menu
■34
Services■35
Professional studi⻬o
Hands fre⻬e
Door stat⻬e
Alarm message⻬s
Messages■37

4
Notes

5
1
1 Introduction and basic functions
General information■
Your Video Station: use it now!■
Video door entry function keys⻬
Navigation keys⻬
Menu function■
Volume adjustment⻬
Monitor adjustment⻬
Date/Time adjustment⻬
Camera swing⻬
Cleaning glass⻬
Bells adjustment⻬
Paging⻬

Introduction and basic functions1
6
The Video Station oers the normal video door entry and CCTV functions
and can also interact with your My home system.
Fitting in with My Home
•Scenarios:
Runs the scenarios saved in the Scenario module.
•Alarms:
Signals the last alarm events which have occurred and the division of
the system.
•Sound system:
Manages the BTicino digital sound system, acting as an amplier.
•Temperature control:
Displays and adjusts the temperature in the various zones of the home
and the state of the control unit.
WARNINGS
■Incorrect use of the Video Station and of all the devices
connected to it excludes any guarantee !
■ For cleaning only use a damp or antistatic cloth. Avoid the
use of alcohol or chemical detergents.
General information■Your Video Station: use it now!■
1
3
4
1- LCD 8” colour display
2- Microphone
3- Navigation keys
4- LED and Video door entry function keys
5- Loudspeaker
2
5

Introduction and basic functions 1
7
Video door entry function keys⻬Navigation keys⻬
key
Allows access to the menu; confirms the
selection made.
keys
Inside the menu they change the value set.
In audio/video connection they allow rapid
access to the volume and monitor settings.
Activation Entrance Panel/Cycling
It activates the switching on of the associated Entrance
Panel and, if present, allows the cycling display of the
other Entrance Panels/cameras.
keys
Inside the menu they select the previous or next
item.
Connection key
Activates/deactivates the audio connection.
When a call has been received the LED ashes; press
once to answer: the LED shines steadily.
At rest activates the paging function (if enabled).
Call exclusion
Enables/disables the call bell. If the bell is excluded
the exclusion LED lights up and the Connection LED
(ashing) signals the call.
Door lock key
When there is a call it opens the door lock of the Entrance Panel
from which the call was made, at rest that of the associated
Entrance Panel. The LED signals that it is activated.
Staircase Lights
Activates the staircase lights relay.
Mute
Enables/disables the microphone during a sound
connection. Activating the Mute during the conversation
the LED lights up.
keys
Returns to the previous window. If you are
already on the first window it switches the
display o.

Introduction and basic functions1
8
Three possible solutions for drawing up the main menu are given below:
• menu with COMMUNICATION functions;
• menu with HOME AUTOMATION functions;
• CUSTOMISED menu.
For more explanations consult the complete User Manual in the CD supplied.
Use the keys to select the functions from those available:
1) Submenu and commands
2) Use the settings icon to access a series of adjustments/services
described below
SETTINGS
11 1
11 2
COMMUNICATION
Main menu example with programming of just the COMMUNICATION
commands.
HOUSE AUTOMATION
Main menu example with communication and house-automation
submenu.
Menu functions■
Use the key to access the main menu:
ACTIVATION I
12 3
34 5
SCENARIOS
12 3
45 6
1) Communication
2) Intercommunication
3) Camera
4) Cycle cameras
5) Settings
1) Communication
2) Scenarios
3) Alarms
4) Sound system
5) Temperature control
6) Settings

Introduction and basic functions 1
9
The installer has given the exact conguration of your Video Station
the tables below; if he has not lled it in ask for it.
COMMUNICATION
FUNCTIONS DESCRIPTION
SETTINGS
HOUSE AUTOMATION
SUB-MENU SYSTEM FOUND
SCENARIOS
ALARMS
SOUND SYSTEM
TEMPERATURE CONTROL
MULTIMEDIA INTERFACE
CUSTOMISED MENU
The customised menu allows more intuitive use of the Video Station
functions. In fact the menu only displays the functions in your My
Home system and the text of each command can be customised in the
installation phase.
Using the customised menu also lets you:
•Have the PROFESSIONAL STUDIO, HANDS FREE, PAGING and
MULTIMEDIA functions, which otherwise can only be called from the
SETTINGS menu, in the main page or in another page.
12 3
45 6
1) Communication
2) Professional studio
3) Hands free
4) Paging
5) Multimedia
6) Settings

Introduction and basic functions1
10
NOTE: During a video door entry call you can access the Adjustments
menu directly by pressing the or key.
ADJUSTMENTS
VOLUME
BELLS
Volume adjustment⻬
Select
Adjustments
Press to access
the menu
Inside the menu select
one of the items
(e.g. Bells)
Adjust the volume to
the level required.
EP SOUND = sound volume when talking to the entrance panel.
INTERCOM = sound volume when holding an intercom conversation.
BELLS = volume level for all the bells.
SOUND SYSTEM = sound system volume.
TONES = high/low balance.
Press
to conrm

Introduction and basic functions 1
11
NOTE: During a video door entry call you can access the Adjustments
menu directly by pressing the or key.
ADJUSTMENTS
MONITOR
Monitor adjustment⻬
Select
Adjustments
Press to access
the menu
Select
Monitor
Press
to conrm
COLOUR
CONTRAST
Inside the menu select
one of the items
(e.g. Contrast)
Make
the adjustment

Introduction and basic functions1
12
Sets the current date and time.
ADJUSTMENTS
DATE/TIME
Date/Time adjustment⻬
Select
Adjustments
Press to access
the menu
Select
Date/Time
Press
to conrm
> TIME 12:05:00
DATE 31:07:08
TIME 12:05:00
> DATE 31:07:08
Press
to conrm
Set
the hour
Press ; the rst
two numbers ash
Set
the minutes
Press
Use the same procedure to set
the date

Introduction and basic functions 1
13
NOTE: This menu can only be accessed during the connection with the
entrance panel, if this is set up for the camera swing.
SWING BRACKET
ADJUSTMENTS
Camera swing⻬
Select
Adjustments
Press to access
the menu
Select
Swing
Press
to conrm
Adjust the correct
camera angle

Introduction and basic functions1
14
Cleaning glass⻬
SERVICES
Select
Services
Press to access
the menu
The device can be temporarily deactivated for cleaning (all the LED
go out).
At this point the device surface can be wiped with a cloth without sending
any commands to the system.
Normal operation is reset after 20 seconds (all the LED light up again).
Do not clean with solvents, thinners etc. or abrasive products.
Only use the cloth supplied.
CLEANING
Select
Cleaning glass
Press
to conrm

Introduction and basic functions 1
15
You can associate one of sixteen tunes to each call event.
BELLS
Bells adjustment⻬
Select
Bells
CALL FROM EP = call from the
entrance panel (S=0 o S=1)
INTERNAL INTERCOM = call from
the intercom in your apartment
EXTERNAL INTERCOM = call from
an intercom in another apartment
CALL TO THE FLOOR = call from the
pushbutton near your entrance door
TUNE
01
Select Confirm and then to
save the selection and return to the
previous page
Adjust the volume
Choose the tune
CALL FROM EP (S=0)
Select
the event
Press to access
the menu
Press
to conrm

Introduction and basic functions1
16
If your system is set up, using the icon in the main menu a “paging”call
can be sent to the system:
•Basic: only sound system
•Enhanced: on the speaker* audio handsets as well
Paging⻬
Once the communication is activated the voice will be played on the whole
system.
PAGING
Select
Paging
Press
to conrm
The page function can be activated directly by pressing the key
(if the installer has congured it).
* Congurate with Software

17
2
2 Trouble shooting
Push to Talk mode⻬

Trouble shooting2
18
PROBLEM SOLUTION
On pressing the Entrance panel Activation/Cycling key ( ) no picture
appears.
- the audio/video channel may be busy, wait for it to become free
(from 1 to 3 minutes) and try again.
On pressing the key the menu does not switch on and the
handset gives a busy sound
- the audio/video channel is busy, wait for it to become free (from 1 to 3
minutes)
and try again.
When called the handset does not ring
- check that the call has not been excluded
(the call exclusion LED is ON);
- check the conguration of the devices.
At the entrance panel it is dicult to hear the caller
- talk at a maximum distance of 40 centimetres from the Video Station
microphone;
- check the entrance panel settings with the installer and if necessary
reduce the microphone volume;
- you can communicate in PUSH TO TALK mode
(see description on next page).
At the handset it is dicult to hear the caller
-
check the volume setting on the Video Station;
- make sure that there are no strong noise sources near the Video Station;
- you can communicate in PUSH TO TALK mode
(see description on next page).

Trouble shooting 2
19
Press the Connection key to answer the call.
The connection LED lights up.
Receiving a call from the entrance panel.
During the conversation you can activate the PUSH TO TALK function.
Press the Connection key for at least 2 seconds to talk to the entrance
panel.
The LED remains ON.
Push to Talk mode⻬

Trouble shooting2
20
Release the key to hear from the entrance panel.
The LED becomes red.
To end the connection press the connection key briey.
The LED goes out.