BTL-5000 Cart – Assembly Instructions Medical Technologies s.r.o.
page 8 of 10
1.7 PLACEMENT OF THE BTL VAC DEVICE
The BTL vac device shall be placed in the wooden box of the cart
• After unpacking of BTL vac remove the water container on the left side.
• After removing the water container put BTL vac into the wooden box.
• The front bottom edge of BTL vac must be aligned with the edge of the wooden box.
• Put the water container back in.
• Connect the BTL vac device according to the User's Manual.
1.8 MAINTENANCE
All movable parts of the device are manufactured and finished in the way that in case of standard use it is not necessary to
maintain (grease) them during the whole lifetime of the cart.
1.8.1 General Principles of Cleaning
Foreign substances (paint, etc.) on the surface remove by a cloth and tepid water. Never use steel wool, metallic sponges,
knifes or scouring washcloth. Stains of oil or grease can be removed by denatured alcohol.
Never use strong solvents such as acetone, paint thinners, benzine, ammonia or chloride agents, or abrasive polish,
otherwise the finishing or plexiglass could be damaged.
