Buffalo HJ326 User manual

HEAVY DUTY WORKBENCH
ASSEMBLY INSTRUCTIONS
WWW.BUFFALOSHELVING.CO.UK
HJ326
SET UP
STEP 1
STEP 2
PARTS
• 2 PEOPLE REQUIRED
• PROTECT FLOOR WITH MAT
• WEAR GLOVES WHEN ASSEMBLING
• ENSURE COMPONENTS ARE IN GOOD
CONDITION BEFORE ASSEMBLING
• SET POWER TOOLS TO LOW SPEED
• DO NOT TIGHTEN SCREWS UNTIL
FULLY ASSEMBLED
• ATTACH P2 FRAMES TO P1 TABLE TOP
USING F1 FASTENINGS.
• ATTACH P4 SIDE SUPPORTS TO P2 LEG
FRAMES ON EITHER SIDE USING F2
FASTENERS AND F3 NUTS.
P1 x 1
P4 x 2
F1 x 22 F2 x 8 F3 x 16 F4 x 8P5 x 4 P6 x 4
P2 x 2
Follow Manual
Carefully
Follow Manual
Carefully
Keep Small
Parts Away from
Children
Do Not Exceed
Weight Limit
Keep Away from
Children
Do Not Climb Keep Away from
Fire
Handle and
Dispose of Parts
Properly Watch the Assembly Video!

HEAVY DUTY WORKBENCH
ASSEMBLY INSTRUCTIONS
WWW.BUFFALOSHELVING.CO.UK
HJ326
STEP 3
STEP 4
STEP 5
• SECURE WITH F1 FASTENERS
• SLOT P5 LEGS INTO P2 FRAME AND
SECURE WITH F4 FASTENERS AND F3
NUTS
• SCREW P6 RUBBER FEET INTO P5 LEGS
Follow Manual
Carefully
Follow Manual
Carefully
Keep Small
Parts Away from
Children
Do Not Exceed
Weight Limit
Keep Away from
Children
Do Not Climb Keep Away from
Fire
Handle and
Dispose of Parts
Properly Watch the Assembly Video!