DIVERSIFIED WOODCRAFTS SHAIN GSB-6024 User manual

[1]
GSB-6024 WORKBENCH
ASSEMBLY INSTRUCTIONS
*Model views may not represent exact model purchased

[2]
TABLE OF CONTENTS
ASSEMBLY COMPONENTS_______________________________________3
APRON TO LEG ATTACHMENT___________________________________4
LEG ASSEMBLY_________________________________________________5
LEG BRACES & STRETCHERS_____________________________________5
SHELF & CLAMP FRAME_________________________________________6

[3]
ASSEMBLY COMPONENTS
ITEMS INCLUDED
PART #
PART#
1-LEG KIT,TABLE
L3035MP-LB
1-APRON ASSY,TABLE
235634MP
1-TOP,TABLE
17-0017
HARDWARE BOX
4-SCREW,7MMX50MM,
228564
8-SCREW,7MMX90MM
227578
23- SCREWS,#8.00X1.5 FSQ
100066
1-SHELF
235384-4800
1-STRETCHER
S7000-4550MP
2-BRACES
LS7000-16MP
1-CLAMP FRAME
235641MP
REV DESCRIPTION DATE
---
Original Created
3-29-11
NAM

[4]
Assembly Instructions
Items not included but needed for assembly:
1. ½” wrench
2. #2 Phillips bit
Instructions:
1. Lay the table on the floor with the apron side up. (Be sure to lay the table on a
clean surface so you don’t damage the tabletop.)
2. Take each of the table legs and insert the stud bolt through the hole in the steel
corner brace.
3. Apply a lock washer and a 5/16” nut onto each stud bolt. Tighten each nut using a
minimum of 12 foot-pounds but not exceeding 17 foot-pounds of torque.

[5]
4. NOTE: TABLES WITH LEG BRACES AND STRETCHERS SEE
FIGURE 8A.
FIGURE 8A
5. Attach leg braces with: (SCREW,7MMX90MM,CONN,ALLENHEAD,BLACK)
Provided
Stretcher
Leg Brace

[6]
6. Attach stretcher with: (SCREW,7MMX50MM,CONN,ALLENHEAD,BLACK)
Provided
7. Attach shelf using 7- SCREWS,#8.00X1.5 FSQ SMS TYPE 17 (100066)
8. Attach clamp frame to front of table using 8 - SCREWS,#8.00X1.5 FSQ SMS
TYPE 17 (100066)
9. Turn the table over so the top is up. Set your table in place and adjust the leg
levelers to level the table.
Clamp frame

[7]