ByoPlanet CS-900 User manual

1
2
3
4
5
ServiceTechTeam.com
Clean gross fi lth using normal
cleaning protocols.
First Use: Be sure red tip is removed
from battery. Insert battery into
sprayer cap, then insert battery into
sprayer.
Always verify that the LED is
illuminated when in operation.
If not, change the battery.
Rinse the tank prior to switching
product, or use a separate tank for
each chemical.
Place the tank onto the base unit
with the shield facing out.
Attach tank quick connects. Pull up
on the collar of the quick connect
and fi rmly press onto the tank plug
until secure.
Attach quick connects from the
hose line to the sprayer plugs.
Inspect the electrical cords for
damage.
Attach the extension cord to the
base unit, and the corresponding
outlet.
Flip the power switch to power on.
Quick Start Guide
Please read user’s
manual before use.

Quick Start Guide
Please read user’s
manual before use.
6
7
8
9
10
3M
RESPIRATOR
Refer to product-specifi c safety
data sheet (SDS) and follow all
facility guidelines for appropiate
personal protective equipment
(PPE) when using this device.
Purge the Device: After treatment,
purge the sprayer of all solution.
Disengage the trigger lock.
Disconnect the smaller liquid hose
line and continue to depress the
trigger until liquid no longer emits
from the sprayer.
Power off the device.
Empty and rinse the tank of
chemistry. Flush the system with
fresh water prior to storage and
between chemical changes.
Store the device in a safe and
dry location.
Open area to the public once
contact time and chemical
exposure levels indicate it is
safe to do so.
Spraying: Depress the trigger to
emit liquid. Spray surfaces using
a steady, sweeping motion until
surfaces are thoroughly wet*.
Slide back the trigger lock on
top of sprayer for continuous
spraying.
Observe that the LED is illuminat-
ed. If not, change the battery.
ServiceTechTeam.com
*Refer to product label for specifi c directions for use.
SAFETY
GOGGLES
CS-900 Quickstart Guide 01/27/21 - Ver-07