ByoPlanet JetPack P2-BBP2624 User manual

OPERATOR'S MANUAL
For Indoor and Outdoor
Commercial Use
For service and
support, contact
www.byoplanet.com
ENGLISH VERSION
NEEDS NEW LOGO + NAME
ByoPlanet.com

2 | ENGLISH BYOPLANET.COM
This page has been left blank intentionally

Table of Contents
ENGLISH | 3
BYOPLANET.COM
SAFETY NOTICES
Warnings .............................................................................................................................. 4-6
Safety Decal ........................................................................................................................ 6
Protective Gear ................................................................................................................. 6
IMPORTANT SAFETY PRECAUTIONS
Shock Electrical Hazard ................................................................................................. 6
General Safety ................................................................................................................... 7
Chemicals ............................................................................................................................ 7
SYSTEM COMPONENTS
Backpack Assembly ........................................................................................................ 8
Spray Wand Assembly ................................................................................................... 9
Harness Assembly ........................................................................................................... 9
Battery Assembly ............................................................................................................. 10
Charger Assembly ............................................................................................................ 10
Tether Assembly................................................................................................................ 11
OPERATING INSTRUCTIONS
Assembly Instructions .................................................................................................... 12
Spare Parts Kit ................................................................................................................... 12
Preparing the Spray Area ............................................................................................. 13
Device Operation/Setup ............................................................................................... 13
Sprayer Operation During Sanitization and Disinfection .................................. 13
Changing ByoPlanet Approved Products................................................................ 13
MAINTENANCE
Air Filter ............................................................................................................................... 14
Spray Wand Assembly ................................................................................................... 14
Backpack Assembly ........................................................................................................ 14
Battery Assembly ............................................................................................................. 14
SPECIFICATIONS ............................................................................................................. 14
TROUBLESHOOTING ..................................................................................................... 15
EQUIPMENT WARRANTY ............................................................................................ 15
Contact Information......................................................................................................... 16

SAFETY NOTICES
This manual contains information that is important for you to
know and understand before operating the JetPack Cordless
Induction Charged Sprayer. This information relates to pro-
tecting your safety and ensures product reliability and perfor-
mance. It is the owner’s responsibility to ensure that all who
operate this sprayer read this manual.
WARNINGS
To help you recognize this information we use the warning
symbols below. Please read the manual carefully, and pay
special attention to the symbols and warning labels. Warning
labels indicate a potentially hazardous situation which, if not
avoided, could result in death or serious injury.
• Read and fully understand the JetPack Cordless
Induction Charged Sprayer Operator’s Manual prior
to using the Induction Charged Sprayer.
• Read and fully understand the ByoPlanet-approved
product labels prior to using any liquid product with
the JetPack Cordless Induction Charged Sprayer, and
follow safe-use instructions such as recommend per-
sonal protective sprayer (PPE).
• Cordless Induction Charged Sprayers produce signif-
icant induction charge that improves spray coverage.
Charge can accumulate on sprayed objects or the
person conducting the spraying operations. Touching
objects after building up charge may produce a shock
or a spark from the discharge of the induction charge,
especially in low humidity environments. This induc-
tion discharge may startle operators. Use caution
when immediately touching objects that have been
sprayed. Large objects subject to charge accumula-
tion, such as vehicles, must be grounded. Operators
should wear conductive footwear. Operator must
wear ground tether during operation.
• Sprayer must be operated with ground tether.
• Never operate Cordless Induction Charged Sprayers
in the presence of combustible liquids or vapors.
Induction charges can produce sparks that may ignite
combustible liquids or vapors causing serious injury,
death, or damage to property.
• The JetPack Cordless Induction Charged Sprayer is
for both indoor and outdoor commercial use.
Bystanders and pets should not be in the area
during application.
• The JetPack Cordless Induction Charged Sprayer is
intended for indoor storage only. Do not store
outdoors or in vehicles.
• The JetPack Cordless Induction Charged Sprayer
should be stored and operated between 40° and 100°
F (4.5° and 38° C). Storing or operating the sprayer
below 40° F (4.5° C) or above 100° F (38° C) may
result in sprayer damage.
• The JetPack Cordless Induction Charged Sprayer
should never be used in an area containing volatile
chemicals. Nor should they be used in hazardous
environments nor any area containing volatile or
explosive levels of gas, vapor or airborne particles.
• The JetPack Cordless Induction Charged Sprayer
should never be used by untrained personnel.
WARNINGS
• Check hoses, tubes and couplings
daily. Replace worn or damaged
parts immediately.
PRESSURIZED SPRAYER HAZARD
Fluid from sprayer that leaks or ruptures from a
component can splash in the eyes or on skin, causing
serious injury. In order to help prevent a leak or rupture:
WARNINGS
PLASTIC PARTS CLEANING SOLVENT HAZARD
Many solvents can degrade plastic parts and cause them
to fail, which can lead to serious injury or property
damage. In order to help prevent against degradation:
• Use only compatible water-based
solvents to clean plastic structural
pressure containing parts.
• See technical data in this and all
other sprayer instruction manuals.
Read uid and solvent manufactur-
er’s Safety Data Sheets (SDS) and
recommendations prior to use.
FIRE, EXPLOSION AND ELECTRIC SHOCK HAZARD
Flammable fumes, such as solvent and paint fumes, in
work areas can ignite or explode. To help prevent re,
explosion and electric shock:
• The JetPack Cordless Induction
Charged Sprayer must be used
only by trained, qualied
personnel who understand the
requirements of this manual.
• Stop operation immediately if static
sparking occurs or you feel shock.
Do not use sprayer until you
identify and correct the problem.
• Use and clean sprayer only
in well-ventilated area.
• Never spray a ammable
chemical (with a ash point
less than 140°F [60°C]).
• Do not plug or unplug power cords
or turn lights on or off when
ammable fumes are present.
• Keep spray area free of debris,
including solvents, rags, gasoline
or any ammable chemicals.
• Keep a working re extinguisher
in the work area.
• Sprayer must be operated with
ground tether.
4 | ENGLISH BYOPLANET.COM

WARNINGS
WARNINGS
• Do not operate the sprayer when
fatigued or under the inuence of
drugs or alcohol.
• Use uids and solvents that are com-
patible with sprayer wetted parts. See
technical data in all sprayer manuals.
Read uid and solvent manufacturer’s
warnings. For complete information
about your material, request SDS from
distributor or retailer.
• Do not leave the work area while
sprayer is turned on. (including battery)
• Turn off all equipment, including
battery, when not in use.
• Check sprayer daily. Repair or replace
worn or damaged parts immediately
with genuine replacement parts from
ByoPlanet®.
• Do not alter or modify sprayer.
Alterations or modications void your
JetPack Cordless Induction Charged
Sprayer warranty and agency
approvals, and create safety hazards.
• Route hoses and ground tether away
from trafc areas, sharp edges,
moving parts and hot surfaces.
• Hoses and ground tether may be trip
hazards. Avoid stepping or standing
on any hoses and tether. Watch
your step.
• This appliance is not intended for use
by persons (including children) with
reduced physical, sensory or mental
capabilities, or lack of experience and
knowledge, unless they have been
given supervision or instruction
concerning use of the appliance by
a person responsible for their safety.
• Children should be supervised to
ensure that they do not play with
the appliance.
CHEMICAL USE HAZARD CONTINUED
• The JetPack Cordless Induction Charged Sprayer must
only be used with products that have been approved
by ByoPlanet®. Never spray any liquid product that is
not a ByoPlanet®-approved product.
• The JetPack Cordless Induction Charged Sprayer
warranty is voided if the JetPack Cordless Induction
Charged Sprayer is used with products that are not
approved by ByoPlanet®. Be aware that many chemical
liquids can be harmful if they are not used properly.
• Read and understand the ByoPlanet®-approved
product’s SDS and label prior to use.
• Be aware of rst-aid procedures related to the
product in use.
• It is a violation of federal law to use a chemical in a
manner inconsistent with its label.
• Use PPE as detailed by the ByoPlanet®-approved
product’s SDS.
• For use with non-ammable, non-combustible and
non-volatile uids only. Never spray a ammable
chemical (ash point less than 140°F [60°C]).
All ByoPlanet®approved chemistry conforms to
this specication.
• Ensure the area being sprayed has proper ventilation.
• Bystanders and pets should not be in the area during
application.
• Store all chemicals in a cool, dry place, away from
heat and open ames.
• To dispose of ByoPlanet®-approved products refer
to product labels.
• Never aim the sprayer at yourself, another person,
or a pet.
PERSONAL PROTECTIVE Sprayer
Wear appropriate protective sprayer when in the work
area to help prevent serious injury.
• Refer to product specic ByoPlanet®Safety Data
Sheets (SDS) for any additional Personal Protective
Sprayer (PPE).
SPRAYER MISUSE HAZARD
Misuse can cause death or serious injury
WARNINGS
WARNINGS
CHEMICAL USE HAZARD
Each chemical, such as a disinfectant, has a unique set
of hazards and needs to be handled properly to ensure
worker safety.
WARNINGS
CAUTION
• The battery used in this device may present a risk of
re or chemical burn if mistreated.
• Do not damage or mishandle battery.
• Do not short circuit.
• Store batteries indoors in a cool, dry place. Do not
store in extreme heat or cold.
• Do not expose to moisture or prolonged sunlight.
• Keep away from children.
• Do not disassemble, puncture, or crush battery.
• Do not tamper with or attempt to disassemble the
battery or remove any component projecting from
the battery terminals.
• The battery and charger have no user serviceable parts.
• Fire or injury may result from tampering prior to
disposal, protect exposed terminals with heavy
insulating tape to prevent shorting.
• Turn battery switch to the "OFF" position after use.
WARNING
• Do not leave batteries unattended while charging.
• Fire hazard. Do not store or carry battery so that
metal objects can contact exposed battery terminals.
For example, do not place battery in aprons, pockets,
toolboxes, product kit boxes, drawers, etc., with loose
nails, screws, keys, etc.
LITHIUM-ION BATTERY HAZARD
ENGLISH | 5
BYOPLANET.COM

Protective Gear
• PPE must comply with the American National Standards
Institute’s ANSI Z87.1-1989 standard if purchased after
July 5, 1994, or ANSI Z87.1-1968 or with the standard of
the country in use.
• Eye and face PPE shall be distinctly marked to facilitate
identication of the manufacturer as indicated by OSHA
standard (1910.133[a][4]).
• The following minimum requirements must be met by all
protective sprayers. Protective sprayers shall:
- Provide adequate protection against the particular
hazards for which they are designed
- Be of safe design and construction for the work
to be performed
- Be reasonably comfortable when worn under the
designated conditions
- Fit snugly and not unduly interfere with the movements
of the wearer
- Be durable
- Be capable of being disinfected
- Be easily cleanable
- Be distinctly marked to facilitate identication only
of the manufacturer
THE USE OF EYE-WEAR PROTECTION IS RECOMMENDED
WHEN USING THIS SPRAYER. ALWAYS USE APPROPRIATE
PPE, LISTED ON THE BYOPLANET®-APPROVED PRODUCT
SAFETY DATA SHEET (SDS). BYOPLANET®SDS CAN BE
FOUND AT WWW.BYOPLANET.COM.
IMPORTANT SAFETY PRECAUTIONS
When using an electrical appliance, it is important to
understand that some circuits are electrically live, even
when the power switch is in the off position. Basic safety
precautions should always be followed to reduce the risk
of burns, re, electrical shock, injury and/or death.
Shock/Electrical Hazard
As with most electrical appliances, electrical parts are
electrically live even when the switch is off. To reduce the
risks of burns, re, electric shock or injury.
• Use this sprayer only for its intended use, as described
in this manual.
• Do not use while bathing.
• Do not place or store sprayer where it can fall or be
placed in water or other liquid.
• If sprayer falls into water, do not reach into water
to retrieve.
• Never operate this sprayer if the sprayer shows sign of
physical damage, e.g., impact damage from a severe
drop, or is working improperly. For technical support or
spare parts purchase contact ByoPlanet®support at
www.byoplanet.com.
• Keep sprayer and battery away from heated surfaces.
• If battery pack case is cracked or damaged, do not insert
into charger. Electric shock or electrocution may result.
• Never block the air openings of the sprayer or place it
on a soft surface (bed or couch), where the air openings
may become blocked.
• Never drop or insert any object into any opening on the
sprayer or battery housing.
• Do not use battery charger with a damaged or broken
extension cord.
• Never use or store at a temperature above 100°F (38°C).
CAUTION: JetPack Cordless Induction Charged Sprayer
nozzle. Do not touch or insert any foreign object
into the nozzle.
6 | ENGLISH BYOPLANET.COM
WARNINGS
CAUTION
• Battery pack must be securely attached to the sprayer.
If battery pack is detached, personal injury may result.
• Do not incinerate the battery pack even if it is severely
damaged or is completely worn out. The battery pack
can explode in a re.
• System must be used with battery supplied by ByoPlanet.
• Battery must be charged with charger supplied by
ByoPlanet.
• DO NOT splash or immerse in water or other liquids.
• Do not store or use the sprayer and battery pack in
locations where the temperature may reach or exceed
100° F (38° C).
• Damaged battery packs should be recycled if possible
and consistent with applicable laws.
• Transporting batteries can possibly cause res if the
battery terminals inadvertently come in contact with
conductive materials such as keys, coins, hand tools
and the like.
• The FAA restricts batteries lithium-ion batteries over
100 Wh from passenger aircraft. Do not attempt to
pack battery in carry-on or checked luggage.
LITHIUM-ION BATTERY CONTINUED
Safety Decal

General Safety
Lack of attention to safety can result in reduced efciency,
accidents, personal injury or death. Watch for safety hazards
and correct deciencies promptly. Use the following safety
precautions as a guide when using this machine.
1. Read the operator’s manual. Failure to do so is
considered misuse of the sprayer.
2. Use the JetPack Cordless Induction Charged Sprayer
only for its intended use, as described in this manual.
3. Before operating sprayer, become familiar with all
caution and warning decals afxed to the sprayer.
4. Do not use the JetPack Cordless Induction Charged
Sprayer in a hazardous location.
5. Only trained personnel familiar with the JetPack Cordless
Induction Charged Sprayer and ByoPlanet®-approved
products should be allowed to operate.
6. Do not allow personnel to operate the sprayer without
proper instruction or under the inuence of alcohol or
drugs.
7. Store sprayer in a cool, dry place. Do not expose to
extreme temperatures.
8. Purge liquid line before storing the sprayer.
9. Be aware, even when the sprayer is off, power is still
supplied to the sprayer when battery is on.
10. Never hang sprayer from hose or tether.
11. A sprayer should never be left unattended when
powered on.
12. Always turn off sprayer and battery after each
application.
13. Always unplug battery charger from outlet when not
in use or when leaving it unattended.
14. Never touch the battery with wet hands.
15. Never pull or carry the sprayer by the hose or tether.
16. Do not crimp the charger or strain it around sharp edges.
Doing so might damage the cord.
17. Do not use the battery charger with a damaged
extension cord.
18. Always thoroughly inspect product before usage.
19. During normal operation, the spray wand and loom may
become warm to the touch. If sprayer becomes hot, turn
off and allow sprayer to sit for 30 minutes.
20. For questions or concerns about the JetPack Cordless
Induction Charged Sprayer, contact the ByoPlanet®
Support Team at www.byoplanet.com.
Chemicals
The JetPack Cordless Induction Charged Sprayer can only be
used with products that have been approved by ByoPlanet®
The JetPack Cordless Induction Charged Sprayer warranty is
voided if the JetPack Cordless Induction Charged Sprayer is
used with products that are not approved by ByoPlanet®. Be
aware that many chemical liquids can be harmful if they are
not used properly.
1. Always use appropriate PPE when operating the JetPack
Cordless Induction Charged Sprayer. Refer to product
SDS for proper PPE.
2. Follow the liquid product label and SDS for proper
storing, handling, and disposing of any liquid products
used in the JetPack Cordless Induction Charged Sprayer.
3. Know the length of time required by each liquid product
application before allowing people and pets to return to
the sprayed area.
4. Tampering with ByoPlanet®-approved products, product
containers and the JetPack Cordless Induction Charged
Sprayer in any form will void the customer warranty.
5. To dispose of ByoPlanet®-approved products refer to
product labels.
6. If liquid products come into contact with your skin or
eyes, please refer to product label and SDS for rst aid
measures.
7. Never aim the sprayer at yourself, another person
or a pet.
8. Do not mix chemicals unless specically directed on
the product SDS and label.
IMPORTANT: Safety data sheets (SDS) are available for all
liquid products that have been approved for use in the
JetPack Cordless Induction Charged Sprayer. SDS will inform
you of any hazards and precautions of which you should be
aware. All employees that use the product must be aware of
and have access to SDS. They should also be trained for and
aware of their safety while working with liquid products. It
is the responsibility of the owner of the sprayer to obtain an
SDS from ByoPlanet®for each chemical used.
Visit www.byoplanet.com for more information and a list of
approved chemistries.
ENGLISH | 7
BYOPLANET.COM

SYSTEM COMPONENTS
The patented JetPack Cordless Induction Charged Sprayer was
engineered with the end-user in mind. It is highly durable.
The lters are the only serviceable components. If you are
experiencing issues with your sprayer, please contact ByoPlanet®
support at www.byoplanet.com.
Backpack Assembly
1. Handle
Soft textured handle to ensure comfort and grip.
2. 1-Gallon (3.8 Liters) Product Container
Contains ByoPlanet
®
-approved product (not included with
sprayer).
3. Backpack Electrical Compartment
Lower compartment containing all major electrical
components.
4. Dispensing Cap and Tube
Replaces the cap for the product container when container
is installed in backpack.
5. Container Release Button
Prevents container from falling out when tipped over. Press
button to release container.
6. Spray Wand Storage
Located on the right side of the backpack. Stores the
sprayer wand and hose.
7. Loom Connection Plate
Allows for removal of loom/sprayer assembly as well as
access to uid lter.
8. Replaceable Filter
Replaceable air lter to be replaced every 3 months
or 300 operating hours.
9. Diagnostic Center
LED lights provide information to help customer service
representatives more quickly and accurately diagnose issues.
10. Hour Meter
Logs running time of sprayer to assure proper
maintenance.
11. Model Information
JetPack Cordless Induction Charged Sprayer
Model: P2-BBP2624
Serial No: P2BBP262400001
12. Upper Mounting Points for Harness Assembly
Upper position points for mounting backpack harness.
Adjustable depending on operator size. See harness
assembly section of manual for instructions.
13. Lower Mounting Points for Harness Assembly
Lower position points for mounting backpack harness.
See harness assembly section of manual for instructions.
14. Tether
For best JetPack Cordless Induction Charged Sprayer
performance, make sure tether is attached and
contacting the ground.
15. Battery Module
Houses 24V battery to supply system power.
1
5
2
3
6
13
12
15
8 | ENGLISH BYOPLANET.COM
8
910 11
14
7
4

Spray Wand Assembly
1
5
6
4
2
9
8
7
3
1. Main Control Panel
Indicates the power, sprayer, and induction charge are on.
2. Main Power Button
Initiates power to the sprayer.
3. Induction Charge "On/Off" Illuminated Indicator
Indicates activation of induction charge and spray.
4. Loom Assembly
Connects the electrical line, liquid line, and air line from the
backpack to the spray wand.
5. Spray Wand Handle
Textured handle positioned for ambidextrous use.
6. Lanyard
Attachment point for clipping wand to backpack.
7. Nozzle Assembly
Located on the front of the sprayer.
8. Induction Charged Sprayer Control Trigger Guard
Houses electrical components and protects trigger button.
9. Induction Charged and Spray Button
Initiates liquid spray.
Harness Assembly
1
2
3
4
5
6
7
8
9
ENGLISH | 9
BYOPLANET.COM
1. Upper Harness
Breathable padded back support for ventilation and comfort.
2. Upper Attachment Bolt
Secures upper harness to backpack sprayer.
Can be adjusted to t the operator.
3. Wand Attachment Clip
Clip for temporary spray wand storage.
4. Sternum Strap/Buckle
Strap to ensure even weight distribution.
5. Waist Strap/Buckle
Strap to ensure even weight distribution.
6. Shoulder Straps
Breathable padded mesh shoulder straps.
7. Tensioning Straps
Used to lengthen or shorten the backpack shoulder straps.
8. Lower Attachment Bolts (2)
Secures lower back plate to backpack.
9. Lower Back Plate
Breathable padded lower back support for ventilation
and comfort

Battery Assembly Charger Assembly
3
2
4
5
1
2
3
4
1
10 | ENGLISH BYOPLANET.COM
1. Battery Charger
Plugs into AC power outlet to recharge the 24V battery.
2. Barrel Connector
Insert connector into battery charging port to prepare
for charging.
3. Charge Status LED
Indicates battery charging status. Red LED indicates the
battery is charging, green LED indicates the battery is
fully charged.
4. Type A Plug
Plugs into a 110V wall outlet receptacle to charge battery.
1. 24V Lithium Ion Battery
Provides power to the sprayer.
2. Battery ON/OFF Switch
Initiates and shuts off power to the sprayer.
3. Charging Port
Inlet for battery charger barrel connector to
charge battery.
4. State of Charge Indicator
Press button to illuminate LEDs that indicate battery
charge state. Single red LED indicates low battery /
charging required.
5. Handle
Allows for insertion and removal of battery from
battery module.

Tether Assembly
1. To attach the tether, press the female fabric snap on the
tether onto the male snap on the base of the backpack.
NOTE: Do not remove lose wires as they are functionally
necessary.
ENGLISH | 11
BYOPLANET.COM

12 | ENGLISH BYOPLANET.COM
Assembly Instructions
To adjust the backpack upper harness:
1. Adjust the upper harness by loosening the tensioning
straps. Then using a Phillips screwdriver, thread the screw
into one of the two adjustable upper harness locations.
The upper pad should be secured once the screw is
 rmly tightened into position.
Note: The upper part of the harness should sit between the
shoulder blades for proper  t. Taller users may need to move
the position up. Shorter users may need to move the position
down. DO NOT use any additionally assembly compounds
such as Loctite™ or grease.
2. To attach the lower part of the harness, use a Philips
screwdriver to thread the lower attachment bolts into
the lower back plate.
NOTE: DO NOT use any additional assembly compounds
such as Loctite™ or grease.
OPERATING INSTRUCTIONS
Spare Parts Kit
1. Holster
2. Replacement Air Filter (2)
3. Lower Attachment Bolts (2)
4. Carabiner
5. Replacement Tether
1
2
4
5
3

ENGLISH | 13
BYOPLANET.COM
Preparing the Spray Area
1. Close the room to the general public for cleaning. Place
signs or warning indicators on doors that indicate no one
should enter the room.
2. Clean gross lth by using standard manual cleaning
protocols.
3. Power off any sensitive electrical equipment. Equipment
does not need to be unplugged.
Sprayer Setup
1. Choose the appropriate ByoPlanet®-approved product.
2. Put on appropriate PPE. See section on PPE on page 5.
3. Mount desired ByoPlanet®-approved product on the
backpack by sliding the container into the container
reservoir. Ensure that the container is positioned facing
up with the opening below the dispensing tube.
4. Unscrew the lid on the ByoPlanet®-approved product and
connect the dispensing cap to the container. Be sure the
cap is screwed all the way down; do not over-tighten.
5. Verify that battery is charged. Turn battery switch to the
'ON' position and insert battery into the battery module
with label facing the harness.
6. Put on backpack and properly secure in place using
safety straps. To properly secure the backpack:
- Remove spray wand from spray wand storage hook
and place wand onto the backpack shoulder strap
using the wand attachment clip.
- Loosen the shoulder straps and the waist belt. Lift
the backpack and slide arms through the straps.
- Connect the waist strap. Tighten the waist belt and
ensure the weight of the sprayer is concentrated on
your hips rather than shoulders. If needed, use the
upper mounting points to adjust attachment bolt
using a Phillips screwdriver to ensure the weight of
the sprayer is concentrated on your hips.
- Connect the sternum straps.
- Adjust the shoulder straps so that the sprayer ts
comfortably, and the weight is still concentrated on
your hips.
- Slide the buckle up or down the strap for best t.
7. Remove wand from the wand attachment clip. With the
wand rmly in hand, locate the main power switch on the
sprayer wand. Press and release the main power button
on wand to initiate power to the system. Main power
button will illuminate blue.
8. Priming the JetPack Cordless Induction Charged Sprayer:
Aim the nozzle into an inconspicuous corner, container or
drain. Press and release the spray button on the wand to
activate the JetPack Cordless Induction Charged Sprayer
System and to spray solution. Induction Charge indicator
ring on wand will illuminate blue. Spray until a steady
ow of solution runs through the nozzle. Press and
release the spray button on the wand to stop spraying.
NOTE: Sprayer will automatically stay on until spray
button is depressed an additional time, or the main
power button is pressed.
Sprayer Operation
1. Direct the spray wand at the desired surface.
2. Begin to spray. With the main power button already on,
press the sprayer button once to initiate spraying. Press
again to stop ow of the sprayer.
3. Follow a continuous path around the area working from
high to low areas, moving the sprayer in a sweeping
motion until surfaces are thoroughly wet. Optimal spray
distance away from surfaces is 2–4 feet (0.6 – 1.2 meters).
NOTE: If using the wand holster for temporary storage,
turn off the system by pressing the main power button
prior to placing the wand into the holster.
4. After spraying, keep the area closed to the public until
applicable bystander re-entry times are reached (see
the product SDS for information on bystander re-entry
times). If no re-entry time is indicated, keep the area
closed until product contact times are reached or
surfaces are visibly dry.
5. Remove the closed sign from the door.
6. Remove and turn battery switch to 'OFF' position for
storage. Store in a cool, dry place indoors.
Changing ByoPlanet®-Approved Products
1. Stop spraying the JetPack Cordless Induction Charged
Sprayer and take off the sprayer.
2. Disconnect the dispensing cap from the ByoPlanet®-
approved product that is to be changed.
3. Press the container release button and remove container
from the sprayer. Cap the removed product if it is being
stored.
4. Purging the JetPack Cordless Induction Charged Sprayer:
With the main power already on, press spray button into
an inconspicuous corner, container or drain. Spray the
JetPack Cordless Induction Charged Sprayer until no
liquid comes out of the nozzle.
5. Choose the appropriate ByoPlanet®-approved product.
6. Mount desired ByoPlanet®-approved product on the
backpack by sliding the container into the container
reservoir. Ensure that the container is positioned with the
opening facing up and the opening below the dispensing
tube.
7. Unscrew the lid on the ByoPlanet®approved product of
your choice and connect the dispensing cap to the con-
tainer. Be sure the cap is screwed all the way down; do
not over-tighten.
8. Priming the JetPack Cordless Induction Charged Sprayer:
With main power already on, depress trigger into an
inconspicuous corner, container or drain. Spray the
JetPack Cordless Induction Charged Sprayer for up to
25 seconds to generate a steady ow of solution.
OPERATING INSTRUCTIONS

14 | ENGLISH BYOPLANET.COM
In order for the JetPack Cordless Induction Charged Sprayer
to remain functional, the sprayer should be cleaned on a
regular basis. In addition to general cleaning of the sprayer,
one user serviceable area — the air lter — must be
maintained and serviced regularly.
NOTE: As the sprayer becomes dirty from typical use, a
70% isopropyl alcohol cleaner that is manually applied
is recommended on outside surfaces.
Air Filter
Looking at the bottom of the backpack, locate the Replace-
able Filter access panel (see SYSTEM COMPONENTS —
BACKPACK ASSEMBLY). Open panel and remove lter from
slot. Replace with OEM lter media, PN 600254. This lter
must be replaced every three months or 300 operating hours.
Operating hours are recorded on the on the Hour Meter (See
SYSTEM COMPONENTS — BACKPACK ASSEMBLY).
To purchase spare parts, visit www.byoplanet.com.
NOTE: One lter is included in the sprayer with three
additional lters for replacement.
Spray Wand Assembly
The spray wand assembly IS NOT eld serviceable. Any
attempt to disassemble the wand or to perform eld service
will void the warranty and likely damage the sprayer. Do not
open the sprayer shell, as doing so will void the warranty on
the sprayer. If you are experiencing issues with your spray
wand assembly, please contact Customer Support at
www.byoplanet.com. To clean the spray wand assembly of
excess debris, manually apply 70% isopropyl alcohol to the
exterior of the wand assembly using a cloth.
Backpack Assembly
The backpack assembly has no serviceable parts inside.
Do not open the housing, as doing so will void the warran-
ty on the sprayer. If you are experiencing issues with your
backpack assembly, please contact Customer Support at
www.byoplanet.com. To clean the backpack of excess debris,
manually apply 70% isopropyl alcohol to the exterior of the
backpack using a cloth.
MAINTENANCE
Volts 24V
Hose Length 5 ft. (1.52 m)
Dimensions Backpack: 21.2 in x 12 in x 6.5 in
(53.8 cm x 30.5 cm x 16.5 cm)
Weight – Empty 24 lbs (10.9 kg)
Weight – Full 33 lbs (14.9 kg)
Shipping Weight Unit: 23 lbs
Battery Kit: 7 lbs
Flow Rate 80-90 mL/min
SPECIFICATIONS
Battery Assembly
The battery assembly has no serviceable parts inside. Do not
open the battery housing, as doing so is a safety hazard and
will void the warranty on the sprayer.
For optimal battery life, recharge the battery pack once
every 3 months if in long-term storage.
If you are experiencing issues with the battery assembly,
please contact Customer Support at www.byoplanet.com.

ENGLISH | 15
BYOPLANET.COM
TROUBLESHOOTING
Potential
Issue
No power
System is not
switched on
Blower has
overheated
Out of liquid
solution
Weak or erratic
power supplied
to system
Damage to
loom assembly
Dispensing cap
is not properly
attached to
the container
Bubbles in
liquid line
or end of
container
Corrective Action
Verify the battery is switched 'ON' and
installed properly. Verify the battery is
charged via the state of charge indicator
button on the battery, a single red LED in-
dicates the battery requires charging. If the
sprayer still refuses to start, the user should
contact ByoPlanet®support. The sprayer
is equipped with a diagnostic center that
is visible through a small window on the
bottom of the sprayer to help ByoPlanet®
support diagnose issues. The Green LED
means the sprayer is powered. The white
LED means the signal is coming from
the base. The blue LED means the signal
is coming from the sprayer wand. If your
sprayer stops working, be sure to check
the LED display to determine whether the
base or wand is no longer properly func-
tioning and contact ByoPlanet®support
for sprayer support and part replacement.
Press main power button on back of wand.
Main power button will illuminate.
Allow the sprayer to sit for a minimum of
30 minutes with the power off.
Inspect product container for solution level
and replace if empty.
Verify the battery is charged via the state
of charge indicator button on the battery.
If a single red LED is illuminated, remove
and charge the battery.
Inspect loom assembly for escaping air
or uid. If found, contact ByoPlanet®’s
Support replacement.
Prior to screwing on dispensing cap, en-
sure no foil, dirt or debris is in the contain-
er threads. Ensure container connection is
properly threaded and hand tight.
SYSTEM WILL NOT TURN ON
OR HAS SHUT OFF SUDDENLY
NO SPRAY, ERRATIC SPRAY,
OR WEAK SPRAY
NOTE: DO NOT use a chemical in the sprayer that is not a
ByoPlanet®approved product. If you encounter the issues
listed below, use the suggested troubleshooting methods. If
you encounter an issue that is not addressed in this manual,
contact ByoPlanet®support at www.byoplanet.com.
Bubbles in
liquid line
or end of
container
Kink in loom
assembly
Blockage in
nozzle
Clogged
air lter
Sprayer is not
stored upright
Container
reservoir was
not wiped
clean after use
Harness is not
properly
secured
to operator
Liquid line is
disconnected
Punctured
or damaged
container
Aim the nozzle into an inconspicuous cor-
ner, container or drain. Press and release
the spray button on the wand to activate
the JetPack Cordless Induction Charged
Sprayer system and to spray solution.
Bubbles in liquid line or end of container
continued Induction Charged Sprayer
indicator ring on wand will illuminate blue.
Spray until a steady ow of solution runs
through the nozzle. This may take up to
35 seconds when beginning a new con-
Check to ensure loom assembly is not
pinched, kinked or bent too tightly.
Power down and unplug backpack. Visu-
ally inspect nozzle from outside for block-
ages. Note: Spray wand assembly, includ-
ing the nozzle is non-serviceable. If there
are problems with obstructions in the
wand or nozzle assembly, please contact
www.byoplanet.com.
Replace air lter. See MAINTENANCE
section to access and replace lter.
Storage of product or the sprayer on its
side can lead to container leaking. Sprayer
should be stored in the upright position.
When not in use, the sprayer should be
stored in a cool, dry place. Container can
be removed from the sprayer and capped
to store separately.
Operator should wipe the container reser-
voir clean after use to remove liquid build-
up caused by normal operation. Wiping the
container reservoir clean after use avoids
excess buildup and potential spills. Always
operate and store the sprayer in the upright
position. Note that some leakage from the
base of the sprayer is normal. There is an
overow drain between the container
cavity and base of the sprayer.
Ensure the harness is secured properly and
adjusted to the operator. The sprayer
should be worn in the upright position and
only worn during operation. Any misuse or
operation of the sprayer not in the upright
position can lead to container leaking.
Reconnect the clear liquid line to the
dispensing cap. Ensure there is no damage
to the liquid line or dispensing cap to avoid
leaks and contamination. After reconnect-
ing, the sprayer may need to be primed
prior to spraying.
Disconnect the container from the dispens-
ing cap and remove the container from the
reservoir. Inspect container for damage. If
damaged, replace with another ByoPlanet®
approved product.
AIRFLOW SEEMS LOW OR WEAK
LEAKAGE IS OCCURRING
SPRAYER WARRANTY
THE JETPACK CORDLESS INDUCTION CHARGED SPRAYER
COMES WITH A ONE YEAR WARRANTY. PLEASE REFER TO
THE MANUFACTURER’S WARRANTY POLICY FOUND AT
WWW.BYOPLANET.COM.
tainer or starting for the rst time. If small
bubbles are visible in the dispensing tube,
hold spray wand below the backpack
sprayer for priming or wait up to 5 minutes
for bubbles to dissipate. If consistent ow
is not achieved, re-attach dispensing cap
to ensure it is properly threaded.

FOR CUSTOMER
COLLATERAL, INCLUDING
OPERATOR’S MANUAL
AND QUICK START GUIDES
BYOPLANET.COM/SUPPORT
1-877-220-0550
QUESTIONS?
BYOPLANET.COM/SUPPORT
CONTACT US
FOR THE JETPACK
CORDLESS INDUCTION
CHARGED SPRAYER
WARRANTY INFORMATION
BYOPLANET.COM/SUPPORT
1-877-220-0550
JETPACK CORDLESS - VER.13 - 07-08-22
TO PURCHASE A JETPACK
CORDLESS INDUCTION
CHARGED SPRAYER
BYOPLANET.COM/SALES
1-877-220-0550