Byron DB313 Owner's manual

Usage Guide: Avoid positioning the Bell Push/Chime on or directly near
metallic surfaces as this may reduce the operation range.
UPVC Door Frames:
When positioning the bell push onto a UPVC door, always check the
operating performance before final installation, internal metal frame
of the door may affect performance.
Tip: Try adjusting the location of the Bell Push slightly to the Left/Right or place on
an external wall.
Note: the appliance is not to be used by children or persons with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge unless they
have been given supervision or instruction. Children should be supervised to
ensure that they do not play with the appliance.
433.92MHz
R&TTE
APPROVED
CH Byron Electrical United Kingdom. www.chbyron.com
A
B
DK
FIN
F
D
GR
LT
IRL
I
L
NL
P
E
S
UK
BG
CZ
EST
H
IS
LV
M
N
SK
SLO
CH
PL
RO
Project Manager
Mr G Hunter
GB: CH Byron
Byron House, Sherwood Rd
Astonfields, Bromsgrove
B60 3DR
UK
Tel: [phone] (UK)
[email protected]
www.chbyron.com
9-5 Mon-Fri, Local call charges apply
™
Using a small flat
screwdriver, insert into the
locking clip and gently
twist. The back plate will
unclip from the Bell Push.
Insert the 23A battery
(Supplied) into the battery
holder, making sure the
Positive/Negative terminals
match the internal
markings.
1 2 3
SN: SP021012
4
30Metres
DB313 Wire Free Chime Kit
Portable Door Chime: DB301 v2
Power: 3 x AA/LR6 1.5V Batteries (Not supplied)
Range: 30 Metres
Indoor Use Only
Specification
Bell Push: DBT
Power: 1 x 23A 12V DC Battery (supplied)
IP44 Weather Resistant
Bell Push & Door Chime:
1: Using back plate as template
2: Making sure UP arrow points UP.
3: Mark and drill holes.
4: Insert wall plugs and attach to wall using screws
provided.
5: Clip the Bell Push on to the back plate making sure
Bell Push ‘Clicks’ in to place.
6: Place the portable chime & Plug-through the Door Chime
into a socket, within the operating range (30M).
Transmission of the wire free signal through Walls, Doors
and Ceilings etc, may reduce the operating range. Chime is
designed for INDOOR use only.
Plug-Through Door Chime: DB303 v2
Power: 220-240V ~50Hz (1W)
Range: 30 Metres
Max Load: 1000W
Indoor Use Only
Remove the battery cover and
insert 3 X 1.5V Size ‘AA’/LR6
batteries, making sure the
Positive/Negative terminals
match the internal markings.
Insert the Plug-through
Chime into a standard
220-240V ~50Hz wall
socket and switch the
socket ON.
ON
ON
5
Press the bell push to
check that the chime is
correctly setup.
6
ON
Plug in a standard plug
e.g. Table light.
Max load: 1000W
V2