Cambium Networks PMP 400 Series User manual

PMP 400/430 and PTP 200/230 Series Configuration and User Guide
pmp-0042 (March 2014) Page 1 of 98
Cambium
PMP 400/430 Series Networks
PTP 200/230 Series Bridges
Configuration
and User Guide
System Release 13.1.1 (PMP 430, PTP 230)
System Release 11.2 (PMP 400, PTP 200)
OFDMCONFIGGUIDE March 2014
© 2014 Cambium Networks. All Rights Reserved.

PMP 400/430 and PTP 200/230 Series Configuration and User Guide
pmp-0042 (March 2014) Page 1 of 98
Accuracy
While reasonable efforts have been made to assure the accuracy of this document, Cambium Networks
assumes no liability resulting from any inaccuracies or omissions in this document, or from use of the
information obtained herein. Cambium reserves the right to make changes to any products described
herein to improve reliability, function, or design, and reserves the right to revise this document and to
make changes from time to time in content hereof with no obligation to notify any person of revisions or
changes. Cambium does not assume any liability arising out of the application or use of any product,
software, or circuit described herein; neither does it convey license under its patent rights or the rights of
others. It is possible that this publication may contain references to, or information about Cambium
products (machines and programs), programming, or services that are not announced in your country.
Such references or information must not be construed to mean that Cambium intends to announce such
Cambium products, programming, or services in your country.
Copyrights
This document, Cambium products, and 3rd Party Software products described in this document may
include or describe copyrighted Cambium and other 3rd Party supplied computer programs stored in
semiconductor memories or other media. Laws in the United States and other countries preserve for
Cambium, its licensors, and other 3rd Party supplied software certain exclusive rights for copyrighted
material, including the exclusive right to copy, reproduce in any form, distribute and make derivative
works of the copyrighted material. Accordingly, any copyrighted material of Cambium, its licensors, or
the 3rd Party software supplied material contained in the Cambium products described in this document
may not be copied, reproduced, reverse engineered, distributed, merged or modified in any manner
without the express written permission of Cambium. Furthermore, the purchase of Cambium products
shall not be deemed to grant either directly or by implication, estoppel, or otherwise, any license under
the copyrights, patents or patent applications of Cambium or other 3rd Party supplied software, except
for the normal non-exclusive, royalty free license to use that arises by operation of law in the sale of a
product.
Restrictions
Software and documentation are copyrighted materials. Making unauthorized copies is prohibited by
law. No part of the software or documentation may be reproduced, transmitted, transcribed, stored in a
retrieval system, or translated into any language or computer language, in any form or by any means,
without prior written permission of Cambium.
License Agreements
The software described in this document is the property of Cambium and its licensors. It is furnished by
express license agreement only and may be used only in accordance with the terms of such an
agreement.
High Risk Materials
Components, units, or 3rd Party products used in the product described herein are NOT fault-tolerant and
are NOT designed, manufactured, or intended for use as on-line control equipment in the following
hazardous environments requiring fail-safe controls: the operation of Nuclear Facilities, Aircraft
Navigation or Aircraft Communication Systems, Air Traffic Control, Life Support, or Weapons Systems
(High Risk Activities). Cambium and its supplier(s) specifically disclaim any expressed or implied
warranty of fitness for such High Risk Activities.
© 2014 Cambium Networks Limited. All Rights Reserved

PMP 400/430 and PTP 200/230 Series Configuration and User Guide
pmp-0042 (March 2014) Page 2 of 98
Table of Contents
Table of Contents..................................................................................................................................... 2
List of Tables............................................................................................................................................ 5
List of Figures........................................................................................................................................... 6
List of Procedures .................................................................................................................................... 7
Chapter 1 : Introduction..................................................................................8
General information................................................................................................................................ 10
Version information......................................................................................................................... 10
Contacting Cambium Networks ...................................................................................................... 10
Purpose .......................................................................................................................................... 11
Cross references ............................................................................................................................ 11
Feedback........................................................................................................................................ 11
Problems and Warranty.......................................................................................................................... 12
Reporting problems ........................................................................................................................ 12
Repair and service.......................................................................................................................... 12
Warranty ......................................................................................................................................... 12
Security Advice ...................................................................................................................................... 13
Warnings, cautions, and notes ............................................................................................................... 14
Warnings ........................................................................................................................................ 14
Cautions ......................................................................................................................................... 14
Notes .............................................................................................................................................. 14
Abbreviations ......................................................................................................................................... 15
Chapter 2 : Product Description...................................................................16
Technology and Benefits........................................................................................................................ 28
nLOS Benefits and Limitations ....................................................................................................... 28
Applications............................................................................................................................................ 29
Configuration Options – RF, IP, DFS ..................................................................................................... 29
Power and Grounding ............................................................................................................................ 30
Administration Systems.......................................................................................................................... 31
Specifications ......................................................................................................................................... 32
Radio specifications (common to all formats) ................................................................................. 33
Specifications for PMP 430 (5.4 & 5.8 GHz) SM and PTP 230 (5.4 & 5.8 GHz) BH radio with
integrated antenna.......................................................................................................................... 33
Specifications for PMP 400 (4.9 & 5.4 GHz) AP/SM and PTP 200 (4.9 & 5.4 GHz) BH radio with
integrated antenna.......................................................................................................................... 35
Specification for PMP 400/430 AP and PTP 200 BH connectorized radio...................................... 35
Specifications for PMP 400/430 kitted, connectorized radio (antenna included) ............................ 36
Performance........................................................................................................................................... 37
Chapter 3 : Planning......................................................................................39
Tower Channel Planning ........................................................................................................................ 39
Downtilt .................................................................................................................................................. 42
Weather Radar....................................................................................................................................... 42
Range and throughput planning ............................................................................................................. 42
Spectrum Analyzer................................................................................................................................. 43

PMP 400/430 and PTP 200/230 Series Configuration and User Guide
pmp-0042 (March 2014) Page 3 of 98
AP as Spectrum Analyzer (PMP430 and PTP230 only) ................................................................. 43
Collocation of 5.8 GHz OFDM with Standard 5.7 GHz Canopy FSK...................................................... 47
Channel Spacing.................................................................................................................................... 47
Frame Calculations and Configuration Settings ..................................................................................... 47
Co-location of 5.4 GHz OFDM with Standard 5.4 GHz Canopy FSK ..................................................... 48
Channel Spacing ............................................................................................................................ 48
Frame Calculations and Configuration Settings.............................................................................. 48
Signal to Noise Ratio (SNR)................................................................................................................... 50
Chapter 4 : Configuring.................................................................................52
Link Operation – 1X/2X/3X..................................................................................................................... 52
Transmitter Output Power (and no Jitter) ............................................................................................... 53
Downlink Data %, Range, and Control Slots .......................................................................................... 55
DFS and Regulatory Parameters for 5.8 & 5.4 GHz Radios................................................................... 56
Background and Operation............................................................................................................. 57
Setting DFS and Regulatory Parameters........................................................................................ 60
Installation Color Code........................................................................................................................... 62
External Gain Field................................................................................................................................. 62
Network Control Parameters .................................................................................................................. 63
Forward Error Correction........................................................................................................................ 63
430 Interoperability (Configurable only on PMP 430 SM) ...................................................................... 63
Improved Session Status Page ...................................................................................................... 66
Migration and upgrade path from PMP 430 network to PMP 450 network ..................................... 68
PMP 430 – PMP 450 Link Budget comparison............................................................................... 74
Chapter 5 : Installation..................................................................................77
Installing an AP with Connectorized Antenna......................................................................................... 77
Installing an SM or BH with an Integrated Antenna................................................................................ 84
Chapter 6 : Regulatory and Legal Notices...................................................86
Important Note on Modifications............................................................................................................. 86
National and Regional Regulatory Notices............................................................................................. 86
U.S. Federal Communication Commission (FCC) Notification........................................................ 86
Industry Canada (IC) Notification.................................................................................................... 89
Regulatory Requirements for CEPT Member States (www.cept.org) ............................................. 90
European Union Notification for 5.8 GHz Product .......................................................................... 90
Equipment Disposal........................................................................................................................ 91
EU Declaration of Conformity for RoHS Compliance...................................................................... 91
UK Notification................................................................................................................................ 91
Luxembourg Notification ................................................................................................................. 91
Czech Republic Notification............................................................................................................ 91
Greece Notification ......................................................................................................................... 91
Brazil Notification............................................................................................................................ 92
Italy Notification .............................................................................................................................. 92
Labeling and Disclosure Table for China ........................................................................................ 92
Exposure Separation Distances ............................................................................................................. 93
Details of Exposure Separation Distances Calculations and Power Compliance Margins.............. 93
Legal Notices ......................................................................................................................................... 95
Software License Terms and Conditions ........................................................................................ 95

PMP 400/430 and PTP 200/230 Series Configuration and User Guide
pmp-0042 (March 2014) Page 4 of 98
Hardware Warranty in US............................................................................................................... 97
Limit of Liability....................................................................................................................................... 97

PMP 400/430 and PTP 200/230 Series Configuration and User Guide
pmp-0042 (March 2014) Page 5 of 98
List of Tables
Table 1: Cambium PMP 400/430 and PTP 200/230 Series .......................................................................... 17
Table 2: 5.8 GHz OFDM - PMP 430 and PTP 230 Series Model Number Descriptions ............................... 17
Table 3: 5.4 GHz OFDM - PMP 430 Series Model Number Descriptions ..................................................... 19
Table 4: 5.4 GHz OFDM - PMP 400 and PTP 200/230 Model Number Descriptions.................................... 20
Table 5: 4.9 GHz OFDM - PMP 400 and PTP 200 Model Number Descriptions........................................... 21
Table 6: CMM4 56VDC and 30 VDC Operation............................................................................................ 22
Table 7: Ancillary Equipment and Model Numbers ....................................................................................... 25
Table 8: Performance Details........................................................................................................................ 37
Table 9: 5.8 GHz Channel Center Frequencies, by Region .......................................................................... 40
Table 10: 5.4 GHz Channel Center Frequencies, by Region ........................................................................ 41
Table 11: 4.9 GHz Channel Center Frequencies .......................................................................................... 41
Table 12 Spectrum Analyzer attributes ......................................................................................................... 45
Table 13 AP as Spectrum Analyzer SNMP objects....................................................................................... 46
Table 14 AP as Spectrum Analyzer Deprecated SNMP objects ................................................................... 46
Table 15: Minimum SNR by Modulation and Direction.................................................................................. 51
Table 16: PMP 400/430 and PTP 200/230 Tx output power......................................................................... 53
Table 17: PMP 400/430 AP Control Slot Settings ......................................................................................... 56
Table 18: 5.4 / 5.8 GHz OFDM DFS Operation based on Region Code ....................................................... 58
Table 19 Interoperability configuration options............................................................................................. 64
Table 20 Interoperability SNMP objects ....................................................................................................... 65
Table 21: Switch radio mode SNMP object................................................................................................... 71
Table 22: Sensitivity of PMP 430 vs. PMP 450 ............................................................................................. 71
Table 23: Throughput (PMP 430 AP to PMP 430 SM).................................................................................. 73
Table 24: Throughput (PMP 450 AP to PMP 450 SM).................................................................................. 73
Table 25: Throughput (PMP 450 AP to PMP 430 SM).................................................................................. 73
Table 26: Performance (PMP 430 system) ................................................................................................... 74
Table 27: Performance (Mix of PMP 450 and PMP 430 SMs) ...................................................................... 75
Table 28: US FCC IDs and Industry Canada Certification Numbers and Covered Configurations ............... 87
Table 29: Disclosure Table ........................................................................................................................... 93
Table 30: Exposure Separation Distances.................................................................................................... 93
Table 31: Calculated Exposure Distances and Power Compliance Margins................................................. 94

PMP 400/430 and PTP 200/230 Series Configuration and User Guide
pmp-0042 (March 2014) Page 6 of 98
List of Figures
Figure 1: PMP 430 CAP 54430 & 58430 ........................................................................................................ 8
Figure 2: PMP 400 CAP 54400 - 5.4 GHz ...................................................................................................... 8
Figure 3: PMP 400 CAP 49400 - 4.9 GHz ...................................................................................................... 8
Figure 4: PMP 430 CSM 54430 & 58430........................................................................................................ 8
Figure 5: PMP 400 CSM 54400 - 5.4 GHz...................................................................................................... 8
Figure 6: PMP 400 CSM 49400 - 4.9 GHz...................................................................................................... 8
Figure 7: PTP 200 Integrated.......................................................................................................................... 9
Figure 8: PTP 200 Connectorized................................................................................................................... 9
Figure 9: PTP 230 Integrated.......................................................................................................................... 9
Figure 10: CMM4 56 VDC Power Supply...................................................................................................... 23
Figure 11: CMMmicro and CMM4 30 VDC Power Supply ............................................................................ 23
Figure 12: CMM4 56 VDC Rackmount Power Supply................................................................................... 23
Figure 13: CMM4 - 56 VDC and 30 VDC terminal blocks ............................................................................. 23
Figure 14 600SSH Surge Suppression AP and SM diagram ........................................................................ 24
Figure 15: LOS, nLOS, and NLOS................................................................................................................ 29
Figure 16: AP Grounding Lug ....................................................................................................................... 31
Figure 17: 600SSH pole mount kit ................................................................................................................ 31
Figure 18: PMP 430 SM................................................................................................................................ 34
Figure 19: PMP 430 SM with Optional LENS................................................................................................ 34
Figure 20: PMP 400 and PTP 200 radio with integrated antenna ................................................................. 35
Figure 21: PMP 400/430 and PTP 200 BH connectorized radio ................................................................... 35
Figure 22: CAP 49400 .................................................................................................................................. 36
Figure 23: CAP 58430 and 54430................................................................................................................. 36
Figure 24 Spectrum Analyzer display after running a “Timed Spectrum Analyzer” ....................................... 44
Figure 25: Dynamic Rate Adapt on AP "Configuration => General" page..................................................... 52
Figure 26: SM Power Level on AP “Home => Session Status” page. ........................................................... 54
Figure 27: Max Range & Downlink Data on AP "Configuration => Radio" page. .......................................... 55
Figure 28: DFS Status on AP "Home => DFS Status" page. ........................................................................ 57
Figure 29: Region/Country Code on AP “Configuration => General” page, System Release 11.2 ............... 60
Figure 30: Region/Country Code on AP “Configuration => General” page, System Release 12.1 ............... 60
Figure 31 AP Registration Options............................................................................................................... 63
Figure 32 Device tab..................................................................................................................................... 66
Figure 33 Sessions tab ................................................................................................................................. 66
Figure 34 Power tab...................................................................................................................................... 67
Figure 35 Configuration tab........................................................................................................................... 67
Figure 36: Forced switch radio mode............................................................................................................ 70
Figure 37: Ground lug highlighted on AP ...................................................................................................... 83
Figure 38: Dielectric Grease – Apply to RJ45 connector .............................................................................. 84
Figure 39: Dielectric Grease - Insert Ethernet Cable .................................................................................... 85

PMP 400/430 and PTP 200/230 Series Configuration and User Guide
pmp-0042 (March 2014) Page 7 of 98
List of Procedures
Procedure 1: Reporting Problems................................................................................................................. 12
Procedure 2: Finding collocation values using Frame Calculators................................................................ 49
Procedure 3: Assembling a 5.8 or 5.4 GHz AP, and attaching to tower........................................................ 78
Procedure 4: Assembling a 4.9 GHz AP, and attaching to tower .................................................................. 80
Procedure 5: Cabling and Grounding/Earthing the AP.................................................................................. 83

PMP 400/430 and PTP 200/230 Series Configuration and User Guide
pmp-0042 (March 2014) Page 8 of 98
Chapter 1: Introduction
This guide provides product configuration information specific to the PMP 400/430 Series networks and PTP
200/230 Series bridges in 5.8 GHz, 5.4 GHz and 4.9-GHz bands. Note: PMP 400 5.4 GHz Series is
replaced with PMP 430 5.4 GHz Series.
PMP 430 Series
– 5.4 & 5.8 GHz
Figure 1: PMP
430 CAP 54430 &
58430
PMP 400 Series – 5.4 GHz
Figure 2: PMP 400 CAP
54400 - 5.4 GHz
PMP 400 Series – 4.9 GHz
Figure 3: PMP 400 CAP
49400 - 4.9 GHz
Figure 4: PMP
430 CSM 54430
& 58430
Figure 5: PMP 400 CSM
54400 - 5.4 GHz
Integrated and Connectorized
Figure 6: PMP 400 CSM
49400 - 4.9 GHz
Integrated and Connectorized

PMP 400/430 and PTP 200/230 Series Configuration and User Guide
pmp-0042 (March 2014) Page 9 of 98
PTP 200 Series Backhauls –5.4 and 4.9 GHz
Figure 7: PTP 200
Integrated
PTP 54200 and 49200
Figure 8: PTP 200
Connectorized
PTP 54200 and 49200
PTP 230 Series Backhauls –5.4 and 5.8 GHz
Figure 9: PTP 230
Integrated
PTP 54230 and 58230
This guide should be used along with the PMP Solutions User Guide, which covers general information,
including all network features, RF control features, and GUI (Graphical User Interface) features common
across PMP 100, 400, and 500 Series networks and PTP 100 and 200 Series bridges. The PMP Solutions
User Guide is available from the “PMP Software and Documentation” section of the Cambium Document
Library, http://support.cambiumnetworks.com/pmp/software/index.php.
This guide assumes that the reader has general RF (Radio Frequency) and Internet Protocol (IP) knowledge
and background.
This issue is consistent with features provided by Canopy Release 12.1. Separate Release Notes for each
release are available and include open issues and other important information specific to each release.
Software and software release notes can be downloaded from the Cambium support web site:
http://support.cambiumnetworks.com/pmp/software/index.php.

PMP 400/430 and PTP 200/230 Series Configuration and User Guide
pmp-0042 (March 2014) Page 10 of 98
General information
Version information
The following shows the issue status of this document since it was first released.
Issue Date of issue Description
1 JAN 2012 Initial release
2 FEB 2012 Updates to PTP 230 performance data
3 MAR 2012 Updates to power density details
4 APR 2012 Updates to CMM4 radio powering details
5 JUL 2012 Includes statement that alignment tone is not
supported for PTP 230 product
6 MAR 2013
Updates to part numbers, Installation Color Code
definition, Signal-to-Noise Ratio, additional
notifications
7 JUL 2013 Updated for 12.1
8 SEP 2013 Updated for 12.1.2
9 NOV 2013 Updated for 12.2
10 MAR 2014 Updated for 13.1.1
Contacting Cambium Networks
Support website: http://www.cambiumnetworks.com/support
Main website: http://www.cambiumnetworks.com
Sales inquiries: [e-mail]
Support inquiries: [e-mail]
Telephone Numbers:
North America: [phone]
Latin/Central America: [phone]
Europe, Middle East or Africa: [phone]
Asia/Pacific: [phone]
Full list:
http://www.cambiumnetworks.com/support/contact-support/
Address:
Cambium Networks
3800 Golf Road Suite 360
Rolling Meadows, IL 60008

PMP 400/430 and PTP 200/230 Series Configuration and User Guide
pmp-0042 (March 2014) Page 11 of 98
Purpose
Cambium Networks documents are intended to instruct and assist personnel in the operation,
installation and maintenance of the Cambium equipment and ancillary devices. It is
recommended that all personnel engaged in such activities be properly trained.
Cambium disclaims all liability whatsoever, implied or express, for any risk of damage, loss or
reduction in system performance arising directly or indirectly out of the failure of the customer,
or anyone acting on the customer's behalf, to abide by the instructions, system parameters, or
recommendations made in this document.
Cross references
References to external publications are shown in italics. Other cross references, emphasized
in blue text in electronic versions, are active links to the references.
This document is divided into numbered chapters that are divided into sections. Sections are
not numbered, but are individually named at the top of each page, and are listed in the table of
contents.
Feedback
We appreciate feedback from the users of our documents. This includes feedback on the
structure, content, accuracy, or completeness of our documents. Send feedback to email
support (see ‘Contacting Cambium Networks’).

PMP 400/430 and PTP 200/230 Series Configuration and User Guide
pmp-0042 (March 2014) Page 12 of 98
Problems and Warranty
Reporting problems
If any problems are encountered when installing or operating this equipment, follow this procedure
to investigate and report:
Procedure 1: Reporting Problems
1 Search this document and the software release notes of supported releases
2 Visit the support website (http://www.cambiumnetworks.com/support)
3 Ask for assistance from the Cambium product supplier
4 Gather information from affected units such as:
The IP addresses, MAC addresses, and product Serial Numbers
The software releases
The configuration of software features
Any available diagnostic downloads, including CNUT Customer Support
Tool output
5 Escalate the problem by emailing or telephoning support
See ‘Contacting Cambium Networks’ for URLs, email addresses and telephone numbers.
Repair and service
If unit failure is suspected, obtain details of the Return Material Authorization (RMA) process from
the support website.
Warranty
While our point-to-multipoint products are engineered and quality-tested to withstand severe
conditions, occasionally hardware components can fail as a result of extreme situations. Therefore,
Cambium Networks offers Extended Warranties with equipment coverage and replacement options
to support your point-to-multipoint solutions.
For more information, see http://www.cambiumnetworks.com/support/pmp/warrantly-rma-info
To register products or activate warranties, visit the support website.
For warranty assistance, contact the reseller or distributor.

PMP 400/430 and PTP 200/230 Series Configuration and User Guide
pmp-0042 (March 2014) Page 13 of 98
Using non-Cambium parts for repair could damage the equipment or void warranty. Contact
Cambium for service and repair instructions.
Portions of Cambium equipment may be damaged from exposure to electrostatic discharge. Use
precautions to prevent damage.
Security Advice
Cambium Networks systems and equipment provide security parameters that can be configured by
the operator based on their particular operating environment. Cambium recommends setting and
using these parameters following industry recognized security practices. Security aspects to be
considered are protecting the confidentiality, integrity, and availability of information and assets.
Assets include the ability to communicate, information about the nature of the communications, and
information about the parties involved.
In certain instances Cambium makes specific recommendations regarding security practices,
however the implementation of these recommendations and final responsibility for the security of
the system lies with the operator of the system. Upon equipment release from manufacturing,
some software parameters may be set to an insecure setting to ease field deployment and initial
device management.

PMP 400/430 and PTP 200/230 Series Configuration and User Guide
pmp-0042 (March 2014) Page 14 of 98
Warnings, cautions, and notes
The following describes how warnings and cautions are used in this document and in all documents
of the Cambium Networks document set.
Warnings
Warnings precede instructions that contain potentially hazardous situations. Warnings are used to
alert the reader to possible hazards that could cause loss of life or physical injury. A warning has
the following format:
Warning text and consequence for not following the instructions in the warning.
Cautions
Cautions precede instructions and are used when there is a possibility of damage to systems,
software, or individual items of equipment within a system. However, this damage presents no
danger to personnel. A caution has the following format:
Caution text and consequence for not following the instructions in the caution.
Notes
A note means that there is a possibility of an undesirable situation or provides additional
information to help the reader understand a topic or concept. A note has the following format:
Note text.

PMP 400/430 and PTP 200/230 Series Configuration and User Guide
pmp-0042 (March 2014) Page 15 of 98
Abbreviations
The following abbreviations may be used in these notes:
1X 1X (QPSK) modulation FSK Frequency Shift Keying
2X 2X (16-QAM) modulation GHz Gigahertz
3X 3X (64-QAM) modulation GPS Global Positioning System
AAA Authentication, Authorization, and
Accounting
LoS
Line of Sight
AES
AP
Advanced Encryption Standard
Access Point Module
MIB Management Information Base for SNMP
BH Backhaul Module, either timing master
or timing slave
MIR Maximum Information Rate
BHM Backhaul Module – Master NAT Network Address Translation
BHS Backhaul Module – Slave nLoS
Near Line of Sight
CAP Access Point Module NLoS Non Line of Sight
CIR Committed Information Rate OFDM Orthogonal Frequency Division
Multiplexing
CMM Cluster Management Module (CMM4
or CMMicro)
PMP
Point-to-Multi-Point (AP to SMs)
CNUT Canopy Network Updater Tool PPS Packet Per Second
CSM Subscriber Module PTP Point-to-Point (Backhauls)
DES Data Encryption Standard QAM Quadrature Amplitude Modulation
DFS Dynamic Frequency Selection for radar
avoidance
QPSK Quadrature Phase Shift Keying
DHCP Dynamic Host Configuration Protocol RADIUS Remote Authentication Dial-In User
Service
DiffServ Differentiated Services RF Radio Frequency
EIRP Equivalent Isotropically Radiated
Power
SM Subscriber Module
ETSI European Telecommunications
Standards Institute
SNR Signal-to-Noise Ratio
EU
European Union
VDC Volts Direct Current
FCC
Federal Communications Commission
(United States)
VLAN Virtual Local Area Network
VSA Vendor-Specific Attribute

PMP 400/430 and PTP 200/230 Series Configuration and User Guide
pmp-0042 (March 2014) Page 16 of 98
Chapter 2: Product Description
PMP 400/430 Series networks and PTP 200/230 Series bridges add OFDM-based (Orthogonal Frequency
Division Multiplexing) products to the Canopy family.
PMP 430 5.4 and 5.8 GHz SMs as shown in Figure 4 on page 8use the Canopy SM form factor
with an integrated antenna.
PMP 400 5.4 GHz SMs as shown in Figure 5 on page 8 are available with either an integrated
antenna or an external N-type connector on a short length of coaxial cable for connecting to a
connectorized antenna.
PMP 400 5.4 GHz AP and PMP 430 5.4 and 5.8 GHz APs as shown on page 8 are always
connectorized, and sold either as a radio with a connectorized antenna as a kit, or as a radio with
an external N-type connector on a short length of coaxial cable for connecting to an operator-
provided antenna. U.S. customers must use the kit version since the FCC requires the radio to be
regulatory certified with the connectorized antenna.
PTP 200 5.4 and 4.9-GHz BHs as shown in Figure 7 and Figure 8 on page 9are available with
either an integrated antenna or an external N-type connector on a short length of coaxial cable for
connecting to a connectorized antenna.
PTP 230 5.4 and 5.8 GHz BHs as shown in Figure 9 on page 9 use the Canopy SM form factor
with an integrated antenna.
PMP 400/430 Series networks are available in multiple bands:
PMP 58430 APs and SM provide connectivity in the unlicensed 5.8 GHz band.
PMP 54430 APs and SMs provide connectivity in the unlicensed 5.4 GHz band.
PMP 54400 APs and SMs provide connectivity in the unlicensed 5.4 GHz band.
PMP 49400 APs and SMs provide connectivity in the licensed 4.9 GHz band allocated to public
safety services. State and local governmental entities are eligible to hold 4.9 GHz licenses.
PTP 200/230 Series networks are available in multiple bands:
PTP 54200 BHs provide connectivity in the unlicensed 5.4 GHz band.
PTP 49200 BHs provide connectivity in the licensed 4.9 GHz band allocated to public safety
services. State and local governmental entities are eligible to hold 4.9 GHz licenses.
PTP 54230 BHs provide connectivity in the unlicensed 5.4 GHz band.
PTP 58230 BHs provide connectivity in the unlicensed 5.8 GHz band.

PMP 400/430 and PTP 200/230 Series Configuration and User Guide
pmp-0042 (March 2014) Page 17 of 98
Table 1 shows the Cambium PMP 400/430 Series and PTP 200/230 Series of products by frequency band,
channel bandwidth, cyclic prefix and current software version.
Table 1: Cambium PMP 400/430 and PTP 200/230 Series
Frequency PMP Series
(Point-to-
MultiPoint)
PTP Series
(Point-To-Point) Channel Bandwidth Cyclic
Prefix Software Version
PMP
Series PTP Series PMP Series PTP Series
5.8 GHz
PMP 430 Series
- 58430
PTP 230 Series
-58230
5, 10 or 20
MHz
10 or 20
MHz
1/4, 1/8 or
1/16
12.1.2 12.1.2
5.4 GHz PMP 430 Series
- 54430
PTP 230 Series
-54230
5, 10 or 20
MHz
10 or 20
MHz
1/4, 1/8 or
1/16
12.1.2 12.1.2
5.4 GHz PMP 400 Series
- 54400
PTP 200 Series
- 54200
10 MHz 10 MHz 1/4 11.2 11.2
4.9 GHz PMP 400 Series
- 49400
PTP 200 Series -
49200
10 MHz 10 MHz 1/4 11.2 11.2
Table 2 shows the Cambium PMP 430 Series (5.8 GHz OFDM) AP and SM models. See Specifications for
more information.
Table 2: 5.8 GHz OFDM - PMP 430 and PTP 230 Series Model Number Descriptions
CSM 58430
Model
Number
5.8 GHz OFDM Subscriber
Module (SM) Description Encryption Picture Power 29.5
VDC
Supply Type
5790SM4 5.8 GHz OFDM SM – 4 Mbps DES
Refer to Table 7
for Models
5791SM4 5.8 GHz OFDM SM – 4 Mbps AES
5790SM10 5.8 GHz OFDM SM – 10 Mbps DES
5791SM10 5.8 GHz OFDM SM – 10 Mbps AES
5790SM20 5.8 GHz OFDM SM – 20 Mbps DES
5791SM20 5.8 GHz OFDM SM – 20 Mbps AES
5790SM40 5.8 GHz OFDM SM – Uncapped DES
5791SM40 5.8 GHz OFDM SM – Uncapped AES

PMP 400/430 and PTP 200/230 Series Configuration and User Guide
pmp-0042 (March 2014) Page 18 of 98
CAP 58430
Model
Number
5.8 GHz OFDM Access Point
(AP) Description Encryption Picture CMM Type
5780AP 5.8 GHz OFDM Connectorized
AP w/antenna DES
Requires CMM4
w/56 VDC
supply
5780APUS 5.8 GHz OFDM Connectorized
AP w/antenna - US Model DES
Requires CMM4
w/56 VDC
supply
5781AP 5.8 GHz OFDM Connectorized
AP w/antenna AES
Requires CMM4
w/56 VDC
supply
5781APUS 5.8 GHz OFDM Connectorized
AP w/antenna - US Model AES
Requires CMM4
w/56 VDC
supply
5780APC 5.8 GHz OFDM Connectorized
AP – No antenna DES
Requires CMM4
w/56 VDC
supply
5781APC 5.8 GHz OFDM Connectorized
AP - No antenna AES
Requires CMM4
w/56 VDC
supply
PTP 58230
Model
Number
5.8 GHz OFDM Backhaul
(BH) Description Encryption Picture CMM Type
5780BH10 5.8 GHz OFDM BH – 10 Mbps DES
CMMmicro or
CMM4 w/30 VDC
supply
5780BH20 5.8 GHz OFDM BH – 20 Mbps DES
CMMmicro or
CMM4 w/30 VDC
supply
5780BH50 5.8 GHz OFDM BH –
Uncapped DES
CMMmicro or
CMM4 w/30 VDC
supply
5781BH10 5.8 GHz OFDM BH – 10 Mbps AES
CMMmicro or
CMM4 w/30 VDC
supply
5781BH20 5.8 GHz OFDM BH – 20 Mbps AES
CMMmicro or
CMM4 w/30 VDC
supply
5781BH50 5.8 GHz OFDM BH –
Uncapped AES
CMMmicro or
CMM4 w/30 VDC
supply

PMP 400/430 and PTP 200/230 Series Configuration and User Guide
pmp-0042 (March 2014) Page 19 of 98
Table 3 shows the Cambium PMP 430 Series (5.4 GHz OFDM) AP and SM models. See Specifications for
more information.
Table 3: 5.4 GHz OFDM - PMP 430 Series Model Number Descriptions
CSM 54430
Model
Number
5.4 GHz OFDM Subscriber
Module (SM) Description Encryption Picture Power 29.5
VDC
Supply Type
5490SM4 5.4 GHz OFDM SM – 4 Mbps DES
Refer to Table 7
for Models
5491SM4 5.4 GHz OFDM SM – 4 Mbps AES
5490SM10 5.4 GHz OFDM SM – 10 Mbps DES
5491SM10 5.4 GHz OFDM SM – 10 Mbps AES
5490SM20 5.4 GHz OFDM SM – 20 Mbps DES
5491SM20 5.4 GHz OFDM SM – 20 Mbps AES
5490SM40 5.4 GHz OFDM SM – Uncapped DES
5491SM40 5.4 GHz OFDM SM – Uncapped AES
CAP 54430
Model
Number
5.4 GHz OFDM Access Point
(AP) Description Encryption Picture CMM Type
5480AP 5.4 GHz OFDM Connectorized
AP w/antenna DES
Requires CMM4
w/56 VDC
supply
5480APUS* 5.4 GHz OFDM Connectorized
AP w/antenna - US Model DES
Requires CMM4
w/56 VDC
supply
5481AP 5.4 GHz OFDM Connectorized
AP w/antenna AES
Requires CMM4
w/56 VDC
supply
5481APUS* 5.4 GHz OFDM Connectorized
AP w/antenna - US Model AES
Requires CMM4
w/56 VDC
supply
5480APC 5.4 GHz OFDM Connectorized
AP – No antenna DES
Requires CMM4
w/56 VDC
supply
5481APC 5.4 GHz OFDM Connectorized
AP - No antenna AES
Requires CMM4
w/56 VDC
supply