CAMBRIONIX SS15 User manual

User Manual
SS15

SS15 Page 1 of 17
1.Table of Contents
1.Table of Contents 1
2.Your SS15 at a glance 2
2.1.Key Features 2
3.Safety 3
3.1.Signal word panel 3
3.2.Safety alert symbol 4
3.3.Pictograms 4
3.4.Product modification 4
3.5.Power supply 5
3.6.Storage and Installation 6
4.Getting Started 7
4.1.What's Included 7
4.2.Connecting to the mains 7
4.3.Previous versions of Windows 7
4.4.Registration 7
4.5.Help and Support 7
5.Using your SS15 8
5.1.Using without connecting to a host computer 8
5.2.Using when connected to a host computer 8
5.2.1 Charging 8
5.3.Data Transfer 8
5.4.Scalability 10
5.5.Manage Ports & Devices 11
5.5.1 LiveViewer 11
5.5.2 Cambrionix API 11
5.5.3 Command Line Instructions (CLI) 12
5.6.Cleaning your SS15 14
6.Product Specifications 15
6.1.Input Power 15
6.2.Output Power 15
6.3.Physical specifications 15
6.4.Power Supply Specifications 16
7.Compliance and Standards 17

SS15 Page 2 of 17
2.Your SS15 at a glance
The SS15 has been designed primarily for desktop use, being highly compact and quiet. It
provides 10W of charging power to each of its 15 x USB 3.2 Type-A ports, allowing mobile
devices to be charged quickly, safely and reliably. All ports can be controlled using Cambrionix
software to allow charging and/or data transfer while monitoring important port and device
information.
The SS15 can charge attached USB devices without using a local computer and our intelligent
charging algorithm allows almost any device to be charged at its optimum rate (up to 2.1A). The
firmware can be up-dated to allow new charging profiles to be added, ensuring the SS15 can
charge the latest devices. It is ready to charge out-of-the-box and to sync devices when
attached to a host computer.
When a local (host) computer is attached, the host can control operation of the ports using
freely available software. Device charging and synchronisation can be monitored through
Cambrionix’s LiveViewer App, the Application Programming Interface (API) or Command Line
Interface (CLI). Cambrionix’s free monitoring and control software can be downloaded from
www.cambrionix.com/software
2.1.Key Features
Up To
5 Gbps
per Port
Up To
2.1A
per Port
Up To
85
Devices
Transfer Data Seamlessly Power Scalability
Each high speed port can
transfer data up to 5 Gbps
Each port can charge devices up
to 2.1A (10W)
Up to 85 devices can be con-
nected at once using multiple
hubs

SS15 Page 3 of 17
3.Safety
This user manual is for informational purposes only, it contains information for start-up and
operation of this product. Note: the contents and the product described are subject to change
without notice. To avoid injuries and damage observe the safety instructions of the user
manual.
Understanding and observing the instructions in this user manual are prerequisites for
hazard-free use and safety during operation. This user manual cannot cover all conceivable
applications. If you would like additional information or if problems arise that are not
sufficiently addressed in this manual please ask your distributor or contact us directly using the
means preferred which are located on the back cover of this manual.
Personal Injury and Damage to the product
lObserve the safety instructions in this user manual
3.1.Signal word panel
Depending on the probability of serious consequences, potential dangers are identified with a
signal word, the corresponding safety colour, and if appropriate, the safety alert symbol.
Indicates a potentially hazardous situation which, if not avoided, may result in moderate or
minor (reversible) injury.
Indicates a potentially hazardous situation which, if not avoided, may result in damage to the
product and/ or its functions or of a property in its proximity.

SS15 Page 4 of 17
3.2.Safety alert symbol
Use of the safety alert symbol indicates a risk of injury.
Observe all measures that are marked with the safety alert symbol in order to
avoid injury
3.3.Pictograms
Warning Signs
Electrical hazard Fire Hazard
Mandatory action signs
Read operating instructions Mandatory regulation
3.4.Product modification
Cambrionix products are designed and manufactured to meet the requirements of UK and
International safety regulations. Modifications to the product could affect safety and render the
product non-compliant to relevant safety standards, which could result in injury or damage to
the product.
Electric shock or personal injury may occur
lDo not modify the product in any way
lDo not dismantle the product

SS15 Page 5 of 17
Fire or personal injury may occur
lDo not obstruct air vents on the product
lDo not cover the product in combustible material
Damage to your product may occur
lDo not bend or compress any part of the product
3.5.Power supply
This section describes safety precautions you must follow when using the power supply.
Electric shock or personal injury may occur
lDo not use a damaged power cord or plug, or a loose power socket
lDo not touch the power plug with wet hands
lDo not allow liquids to come into contact with the unit or power supply
Damage to your product may occur
lThe power cord must be disconnected to cut off power to the product
lDo not short circuit the Power Supply Unit (PSU) supplied with your
product
lDo not disconnect the power cord while the product is being used
lDo not bend or pull the power cord with excessive force

SS15 Page 6 of 17
3.6.Storage and Installation
This section describes safety precautions you must follow when installing and storing your
SS15.
Electric shock or personal injury may occur
lDo not place the power cord near heat sources
lConnect the plug to an earthed socket
Damage to your Cambrionix product may occur
lOperate the product only in an environment where the ambient
temperature is inside the operating temperature range
lOperate the product only in an environment where the relative humidity is
inside the operating range
lBe careful not to leave the power cord underneath a heavy object
Overheated power sockets may cause a fire
lDo not overload the power socket that your hub is connected to
lInsert the power plug all the way into the socket so that it is not loose

SS15 Page 7 of 17
4.Getting Started
4.1.What's Included
l2m Mains power cable (Country specified on order)
l0.8m USB 3.2 Type-A Updater Cable
lSS15 Hub
lPower Supply Unit
4.2.Connecting to the mains
Connect the Power Supply Unit (PSU) to the hub using the 4-pin DIN plug. Connect the power
cable to the PSU. Making sure you adhere to local safety regulations, connect the power cable
to the 100 – 250 Vac mains power outlet and switch the hub on using the small power switch
located adjacent to the power input connector on the hub. When the device is switched on, a
red LED will be illuminated. The hub is now ready to charge attached devices.
4.3.Previous versions of Windows
If you are using a version of Microsoft Windows prior to Windows 10 you will need to install
Cambrionix CDC drivers for enabling the full functionality of the hub. To install the drivers
please detach the hub from the PC before executing the downloaded installer. The installer will
prompt you for permission to install drivers signed by Cambrionix, please agree to this.
Once the installer has completed the installation of the drivers you may attach your hub.
Download the file at: https://www.cambrionix.com/software-archive
4.4.Registration
You may register you and your product at www.cambrionix.com to download LiveViewer and
our API.
4.5.Help and Support
FAQs and help can be found on the Help page here
lwww.cambrionix.com/help_pages/help.
You can raise a support ticket for more in depth support here
lwww.cambrionix.atlassian.net/servicedesk/customer/portals
You can also download any of our manuals and keep up to date at the link here
lwww.cambrionix.com/product-user-guides

SS15 Page 8 of 17
5.Using your SS15
5.1.Using without connecting to a host computer
When the Hub is switched on and is not connected to a local host computer it is
automatically configured to charge devices using its intelligent charging algorithm. Simply
connect the devices to be charged to any of the available ports (not the Host Port) using
USB - compliant cables.
Once the devices are connected, the algorithm will detect the highest charge rate allowable for
each attached device. Charging at the optimum rate (up to 2.1A) specified by the manufacturer
will commence once profiling is complete. Depending on the state of charge of the device
attached, this may take tens of seconds.
5.2.Using when connected to a host computer
5.2.1 Charging
When the Host Port is connected to a local computer, the hub defaults to Sync mode and
charge currents are determined according to USB Implementers Forum (USBIF) Super-Speed
USB3.0 specifications. If the attached device complies with USB-IF Battery Charging
specification BC1.2 and supports Charging Downstream Port (CDP), the hub can provide
high-speed charging at up to 2.1A. If the connected device does not comply with BC1.2,the
charge current will be limited to 500 mA in compliance with USB specifications.
5.3.Data Transfer
If you wish to transfer data, change applications, restore or update your mobile device, a data
connection to a local host computer is required. The hub works independently to the Operating
System (OS) and data transfer can be performed to all common mobile operating systems, such
as iOS, Android, Chromebook and Microsoft. In order to transfer data, connect the host port to
your local (host) computer using a Type-A to Type-A USB2.0 (or higher) compliant cable. Any
devices connected to the hub will now appear as if they were connected to the host computer’s

SS15 Page 9 of 17
USB port. The hub is fully compliant with High Speed USB2.0 and supports data transfer at
speeds up to 480Mbps. The red power LED may flicker when the hub is syncing.
You can now use the programme of your choice to transfer data to and from your device.
Please note that USB specifications require a minimum 100 mA charge current to be delivered
during data transfer. As indicated in above, if the attached device has a BC1.2 compliant CDP
port, the device can draw up to 2.1A while transferring data.

SS15 Page 10 of 17
5.4.Scalability
If you wish to synchronise more devices, multiple hubs can be connected together to allow
more devices to be managed from a single host computer simultaneously.
In order to daisy-chain multiple hubs, each hub needs to be connected to mains power
individually and the first hub in the chain should be connected to the local computer through
the hubs’ “host port”. The Host port of the next hub in the daisychain is then connected to any
of the first hubs downstream USB ports. More hubs are added in the same way.
way.
Using this daisy-chain approach, a maximum of four additional hubs can be linked, allowing a
total of 71 devices to be synced from a single host computer. Alternatively, a star topology can
be used, which allows up to 85 devices to be synced from a single computer. In this
arrangement, the first hub is attached in the same way, connecting the hubs host port to the
computer’s USB port. Thereafter, five additional hubs can be attached to the downstream USB
ports of the first hubs by their host ports as shown below.

SS15 Page 11 of 17
5.5. Manage Ports & Devices
More productivity, saving you time. Cambrionix provides three interfaces by which the Hub can
be monitored and managed:
• LiveViewer
• Cambrionix API
• Command Line Instructions
5.5.1 LiveViewer
LiveViewer is an App that can be downloaded from www.cambrionix.com/products/liveviewer .
Once downloaded and installed on the host computer, LiveViewer allows you to switch the
ports on and off, set the port to charge only, or to sync mode. LiveViewer’s home page shows
the following information about all the ports:
• Status (attached/disconnected)
• Mode (Charge/Sync/Off)
• Profile (Charging profile)
• Duration (how long the device has been attached)
• End time (time the battery reaches a threshold (full) level
• Current (instantaneous charge current in mA)
• Energy (present energy rate in Wh)
Tick boxes adjacent to each port symbol allow that port mode to be changed. When the port is
in Sync mode, only instantaneous current can be monitored through LiveViewer. When the port
is in Charge mode, the charge profile, instantaneous current, energy rate, duration of charge
and end time are displayed. In addition to individual port information and control, LiveViewer
displays the hub rail voltages, time since switched on, total instantaneous current and power,
and temperature. Full instructions on LiveViewer are available on our website.
5.5.2 Cambrionix API
Cambrionix API allows you to monitor and control each port in more detail and to integrate
these functions into your own workflow processes. The API comprises a daemon that can be
downloaded from www.cambrionix.com/products/api and installed on the host machine. Port
information and control can be provided through the API using JavaScript Object Notation
(JSON) Remote Procedure Calls (RPC) over TCP. JSON-RPC calls send a request to the API to
“Get” port, device or Hub information, or “Set” port functions (such as mode). A library of

SS15 Page 12 of 17
sample Python code can be obtained from www.cambrionix.com/products/api to help you
integrate many of these functions into your process workflow alongside the full User Guide.
5.5.3 Command Line Instructions (CLI)
Command Line Instructions can also be used to control and monitor the functions of the
hub and attached devices over a VCP (Virtual COM Port). In order to use the command
line interface a serial terminal emulator must be installed on the host computer. Examples
include Serial, ZTerm, PuTTy, and Minicom. If you would like more information please look at
our more in depth information here www.cambrionix.com/cli
Once you have installed your preferred terminal emulator, please connect to the hub's COM
port using 115,200 baud, 8 data bits, No Parity, 1 Stop Bit. Once you get a command prompt,
type “help” for a list of commands and their usage, as shown below:
Command Action
mode <m> [p] Set mode <m> for port [p] or all ports
mode c <p> [cp] Set charge mode for a port <p> with optional
profile [cp] to enter immediately
state [p] Show state for port [p] or all ports
system Show hardware and firmware information
health Show voltages, temperatures, errors and boot
flag
cef Clear error flags
sef [flags] ... Set error flags
crf Clear rebooted flag
limits Show voltage and temperature limits
list_profiles List all profiles on system
en_profile <i> <1|0> Enable (1) or disable (0) profile <i>
set_profiles <p> [I] Set profiles <I> associated with port <p>
sec [arm|disarm] Set or reveal security mode
host [auto|manual] Show if USB host is present, and set mode
change
id Show id string
bd Board description
logc <s> Report mA for each port every <s> seconds
loge [s] Report state for all ports every [s] seconds and
events as they occur
| Live view (periodically updated screen

SS15 Page 13 of 17
Command Action
showing system state)
remote [exit|kexit] Enter or exit mode where console is
controlled by terminal
ledb <p> <row> <ptn> Set individual LEDon row <row>, port <p> to
flash bit pattern <ptn>
leds <row> [ptnstr] Set flash patternof a string of LEDs on row
<row> to string <ptnstr>
keys Read key click event flags
lcd <row> <col> <str> Write string <s> to LCD at row <row>, column
<col>
clcd Clear LCD
beep [ms] Make console beep for [ms] milliseconds
cls Clear terminal screen
reboot [watchdog] Reboot (optionally by using watchdog timeout)
serial_speed [test|fast|slow] Change serial interface speed
set_delays Change internal delays
host [auto/manual/charge/sync/off Show if USB host is present, and set mode
change
Notes
[p] is port number Range 1....16. Omit for 'all'
<m> is port mode c=Charge, s=Sync, o=Off, b=Biassed
<|> is a list of profile IDs Blank to use all profiles
<i> is a single profile ID
Parameters Optional parameters are shown in [] Com-
pulsory in < >
Tab key Re-runs previous command
Cursor up recalls last command

SS15 Page 14 of 17
5.6.Cleaning your SS15
Cleaning the product is generally not required although in some instances it may be necessary if
excess dirt/ dust/ hair has accumulated or if minor liquid spillages have occurred on the module
during operation or storage.
Electric shock or personal injury may occur
lIf there is a dirt/ spillage is over a ventilation slot, external data/ power
connector or product aperture, please remove power from the unit without
touching the liquid and contact Cambrionix immediately
lEnsure that the product is switched off and the power cord is removed from the product.
Hold the power cable by the plug and do not touch either the plug or the power cord
with wet or damp hands as an electrical shock may result
lWipe the product with a clean, dry and soft cloth. Do not use detergents which contain
alcohol, solvent or surface-active agents. Do not spray water or detergent directly onto
the product
lWet a soft and dry cloth in water and wring thoroughly to clean the product as required
lDry the product thoroughly once the cleaning has finished
lReconnect the power cord and use your product as advised once cleaning and drying is
complete

SS15 Page 15 of 17
6.Product Specifications
6.1.Input Power
Input Voltage 12Vdc
Input Current 15A
Input Connection 4-pin DIN
6.2.Output Power
Output Voltage 5.2V
Output Current (Max per Port) 2.1A
Output Power (Max per Port) 10W
Output Power (Total) 163.8W
6.3.Physical specifications
Input Connectors USB 3.2 Type-A
Output Connectors 15 x USB 3.2 Type-A
Ambient Operating Temperature range 0 - 35 °C
Relative humidity 5% to 95% non-condensing
Dimensions 198.4 x 73 x 40mm
Weight 1.6kg

SS15 Page 16 of 17
6.4.Power Supply Specifications
Input Voltage 100-250Vdc
Input Current 2.5A @ 115Vac
Input Frequency 50-60Hz
Input Connector C14
Output Voltage 12Vdc
Output Current 15A
Output Power 180W
Output Connector 4-pin DIN

SS15 Page 17 of 17
7.Compliance and Standards
lCB Certificate
lCETested and marked
lChina CCC Certification
lFCC Part 15 Tested and marked
lHoused within a UL94-VO specification fire enclosure
lJapanese PSE certification (pending)
lRoHS Compliant
lIndependently safety tested by the Underwriters Laboratory (UL) under file #E346549

Cambrionix Ltd
The Maurice Wilkes Building
Cowley Road
Cambridge CB4 0DS
United Kingdom
T [phone]
E [email protected]
W www.cambrionix.com
© 2021 Cambrionix Ltd. All rights reserved.