Assembly Instructions Popcorn Popper
Model CCP
Assembly Instructions
1. Assemble the popper knob (CCP-2) to the popper lid (CCP-1) using the
machine screw (CCP-3)
2. Screw the popper rod (CCP-4) into the popper (CCP-1)
Note: The end of the popper rod (CCP-4) with the short threads should screw
into the popper (CCP-1)
3. Screw the popper handle (CCP-5) onto thepopper rod (CCP-4)
Note: The end of the popper rod (CCP-4) with the long threads should screw
into the popper handle (CCP-5)
CCP
(CORN POPPER)
ASSEMBLY INSTRUCTIONS
1. ASSEMBLE THE POPPER KNOB (CCP-2) TO THE
POPPER LID (CCP-1) USING THE M4 MACHINE SCREW (CCP-3)
2. SCREW THE POPPER ROD (CCP-4) INTO THE POPPER (CCP-1)
NOTE: THE END OF THE POPPER ROD (CCP-4) WITH THE SHORT THREADS
SHOULD SCREW INTO THE POPPER (CCP-1)
3. SCREW THE POPPER HANDLE (CCP-5) ONTO THE POPPER ROD (CCP-4)
NOTE: THE END OF THE POPPER ROD (CCP-4) WITH THE LONG THREADS
SHOULD SCREW INTO THE POPPER HANDLE (CCP-5)
0214CCP-parts
CCP-2
POPPER KNOB
CCP-1
POPPER
CCP-3
M4 SCREW
CCP-4
POPPER ROD
CCP-5
POPPER HANDLE
Instructions
1. Open Popcorn Popper and add 2 Tablespoons of oil to popper. Spread oil evenly
over the bottom of the popper.
2. Add 1/2 cup of popcorn kernels to popcorn popper. Close the lid and shake to
coat the kernels with oil.
3. Ignite your camp stove and set the temperature between LOW and MEDIUM.
Can also be cooked over a medium flame campfire.
4. Place Popcorn Popper over the flame. Shake the popcorn popper after 10
seconds to rotate the kernels. Shake every 10 seconds until popcorn begins to
pop. We recommend using oven mitts while shaking the popcorn popper to
protect hands from oil splatters.
5. As soon as the popcorn begins to pop constantly shake the unit. Shake the
popcorn popper back and forth as well as from side to side. This keeps the
popped corn from burning.
6. The popcorn will pop more and more frequently as it cooks. As soon as the
popping sound slows, remove the unit from the flame. Pour popcorn into a
serving bowl; season as desired and serve.
Care Instructions
Your popcorn popper is made of seasoned steel, subsequently it will need some
care and maintenance to insure that it stays in great condition for years to come.
• After each use, wipe out any remaining popcorn.
• Wash with warm, soapy water. Dry completely.
• Use Camp Chef conditioner or oil and rub over the entire surface of the popcorn
popper. This product will rust if not properly conditioned.
• Store the popcorn popper in a clean dry place.
3985 N 75 W Hyde Park, UT 84318 • CampChef.com • 800.650.2433
Camp Chef is a registered trademark of Logan Outdoor Products
0214_CCP_Biflold
