Campania International Charleston FT-256 User manual

FT
-
256 Charleston Fountain
Three people are recommended for the installation ofthisfountain!
R
evised
May8, 2017
PumpKitParts List
PK800 pump (1)
#10 stopper(1)
#7 drain stopper(1)
Approx.2”length of¾”clearvinyltubing (1)**
Approx.2”length of5/8”clearvinyltubing (1)**
Approx.36”length of½”blacknon-kinktubing (1)**
Wedges(4)
Hose clamps(2)*
*Hoseclamps maybe used asflow restrictors
** Tubing has been preassembled
-WINTERCARE-
Fountainbowls/topsandotherfountaincomponents,whichcollect water, shouldnotbeleftoutsideinthewinter since anycomponent,
whichfillswithwater andfreezesmaycrack.Likewise, componentssuchaspedestals,whichremaininabasin,filledwithwater,
whichthenfreezes,mayalsocrackor crumble. Ideally, therefore, afountainshouldalwaysbestoredindoorsor inadryprotected
place suchasacoveredporchawayfromtheelements. However, ifafountainmustbeleftoutside:
(1) Removepump, rubber stoppers, drainpipes, finials,andother smallcomponentsfor storageindoors. Note that stoppersor
drainpipesareremovedtoallowdrainageintheeventwater accumulatesinanybasin.
(2) Raisefountainbasefromgroundwithwood stripssothat basewill notfreeze tothegroundsurface.
(3) Cover or wrapthefountainwithburlapor other absorbentmaterial (oldblanket or towel) andthencover securelywith
plastic,making surethat water will notaccumulate inthebasinor other fountaincomponentandfreeze;
(4) Checkfountainperiodicallytoensurethatplastic issecureandwater isnotaccumulating inanyfountaincomponent.
-GENERALFOUNTAINTIPS-
Install fountainsonalevel surface. Youwill needaproperlygrounded110-volt (AConly) GFCI protectedreceptaclenear the
fountainfor your pump. All pumpsaresubmersible andmustbecompletelyunderwater tofunctionproperly. Testall pumpsand
adjusttofull outputprior toassembly. Itisnotrecommendedthat fountainsbeplaceddirectlyongrass or dirt. Positionthechannel
opening at thebaseofeachfountaintoward theelectrical outlet tobeusedsince thepump
cord willbethreadedthroughthisopening.
CheckoutYouTubefor a“Howto”video.
For moreCampania product informationvisit www.campaniainternational.com
All of ourcaststone is proudly
FOUNTAININFORMATION:
Thisfountain holdsapproximately20 gallonsof water.
Thisfountain usesamediumfountain cover.
(FTNCOV-MED)
Compatible with#10 Refill Device
(Aspecialstopper isrequiredtousethe refill kit for
thisfountain.)
TOOLSREQUIRED:
Bubble Level
PUMPINFORMATION:
PP800 - 800GPH Pump
1
6
FTcord length

FT
-
256 Charleston Fountain
Three people are recommended for the installation ofthisfountain!
R
evised
May8, 2017
Assemble your fountainonalevel surface capable ofholdingaminimumof1100 poundswithanapproximate 2.75 squarefoot
footprint.
FT-239J(242 lbs)
20”Lx20”Wx12”H
FT-256F(217 lbs)
15.75”Wx28.5”H
FT-256E (308lbs)
46.5”Wx10”H
FT-256C(72lbs)
10.75”Wx24.75”H
1. Place thebase(FT-239J)intopositionwherethefountainwill
beinstalled, ensuringthatitislevel.
a. Note: Checkthatall componentsare leveled as the
fountainisassembled.
2. Position thelargepedestal(FT-256F) over thebase(FT-236J).
3. Center thelargebowl (FT-256E)over thelargepedestal(FT-
256F).
4. Assemblethefountainplumbing
a. Attachthe3/4”clear tubingtothepumpoutlet.
b. Place ahoseclampover theother endofthe1/2"non-
kinktubing
c. Place thestopper aroundthepumpcordapproximately
8”fromthepump.
5. Feedthepumpcordall thewaythroughtheholein thelarge
bowl(FT-256E), throughthelargepedestal(FT-256F), and
outoftheopeninginthebottomofthebase(FT-239J).
6. FIRMLY pressthestopper intotheholeevenly.
a. Note:Usingthehandleofascrewdriverorhammer
worksbesttopressthestopperinplace.
7. Place thepumpcover(FT-256C) over thepump.
8. Feedthetubingconnectedtothepumpthroughthetopofthe
pumpcover (FT-256C).

FT
-
256 Charleston Fountain
Three people are recommended for the installation ofthisfountain!
R
evised
May8, 2017
FT-256B(60lbs)
22.25”Wx6.25”H
FT-256A(10 lbs)
5”Wx13”H
FT-256D(4lbs)
5”Lx1.5”Wx5”H
FT-239L(8lbs)
8.25”Lx1.75”Wx6.5”H
9. Connectthe1/2"non-kinktubing to thepipeprotrudingfrom
thebottomofthesmall bowl(FT-256B) with thehoseclamp.
10.Center thesmall bowl(FT-256B) onthepumpcover (FT-
256C).
11.Fit thefinial(FT-256A)into thesmall bowl(FT-256B) by
feedingtheprotrudingcopper pipefromthebowlintothe
copperpipeholeinthefinial.
12.Place thepumpcoverdoor(FT-256D)into thepumpcover
(FT-256C).
13.Place thebasedoor(FT-239L)into thebase(FT-239J).
14.Fillthefountainwithwater.