Canon Arizona 1300 Series User manual

Arizona 1300 Series
User guide
© Canon Production Printing 2018, 2020

Copyright
Copyright
Copyright 2018, 2020 Canon Production Printing.
No part of this publication may be copied, modified, reproduced or transmitted in any form or by
any means, electronic, manual, or otherwise, without the prior written permission of Canon
Production Printing. Illustrations and printer output images are simulated and do not necessarily
apply to products and services offered in each local market. The content of this publication
should neither be construed as any guarantee or warranty with regard to specific properties or
specifications nor of technical performance or suitability for particular applications. The content
of this publication may be subject to changes from time to time without notice.
CANON PRODUCTION PRINTING SHALL NOT BE LIABLE FOR ANY DIRECT, INDIRECT OR
CONSEQUENTIAL DAMAGES OF ANY NATURE, OR LOSSES OR EXPENSES RESULTING FROM
THE USE OF THE CONTENTS OF THIS PUBLICATION.
Language
Translation of the original instructions that are in American English.
Edition 2020-01
Software version 1.1 GB

Contents
Chapter 1
Introduction.........................................................................................................................7
Notes for the reader......................................................................................................................................... 8
Available documentation and training......................................................................................................... 10
Chapter 2
Product Compliance......................................................................................................... 11
Product Compliance....................................................................................................................................... 12
Chapter 3
Safety Information............................................................................................................15
Safety and Environment Information........................................................................................................... 16
Flush................................................................................................................................................................ 27
UV LED Curing System.................................................................................................................................. 28
Safety Interlock System................................................................................................................................. 29
Safety Awareness...........................................................................................................................................30
Roll Media Safety Awareness........................................................................................................................36
Chapter 4
Navigate the User Interface............................................................................................. 39
Operator Interface Hardware.........................................................................................................................40
Printer Interface Software..............................................................................................................................42
Print Job Control Module.............................................................................................................................. 44
Maintenance Tasks.........................................................................................................................................52
Counters Module............................................................................................................................................ 53
Settings Module............................................................................................................................................. 55
Tools and Utilities Module.............................................................................................................................58
Software Update Module...............................................................................................................................61
Chapter 5
Operate the Printer........................................................................................................... 63
Training Requirements.................................................................................................................................. 64
Printer Power ON and Off.............................................................................................................................. 65
Print a Job....................................................................................................................................................... 66
Manage the Table Vacuum............................................................................................................................68
The Table Vacuum System..................................................................................................................... 68
Using Vacuum Zones - Metric Zones..................................................................................................... 70
Print the Metric Zone Map................................................................................................................ 70
Imperial Vacuum Zones.................................................................................................................... 72
Batch Mode Printing.......................................................................................................................................74
Enabling composite batch job nesting......................................................................................................... 77
Step and Repeat Printing............................................................................................................................... 78
Manage Media................................................................................................................................................ 80
How to Handle Media.............................................................................................................................. 80
Media Registration...................................................................................................................................82
Contents
3

Chapter 6
Operate the Arizona 13x0 XT...........................................................................................85
Arizona 13x0 XT Features.............................................................................................................................. 86
Use the Arizona 13x0 XT Vacuum System...................................................................................................88
How to Print With Dual Origins..................................................................................................................... 91
Chapter 7
Roll Media Option............................................................................................................. 93
Hardware.........................................................................................................................................................94
Specifications..................................................................................................................................................96
Foot Pedal Switch Functions......................................................................................................................... 97
Roll Media Manager....................................................................................................................................... 98
Load Media................................................................................................................................................... 100
Load Media - Standard Method............................................................................................................ 102
Load Media: Alternate Method............................................................................................................. 107
Unload and Remove Media......................................................................................................................... 110
Set Up a Roll Media Job.............................................................................................................................. 111
Set a Hold on a Roll Job........................................................................................................................ 111
Print on Roll Media.......................................................................................................................................113
Determine the Media Step Correction Factor............................................................................................ 116
Media Edge Protectors.................................................................................................................................117
Chapter 8
Static Suppression Option.............................................................................................121
Reduce Static with the Static Suppression Option....................................................................................122
Change the Height of the Ionizer Bar................................................................................................... 123
Chapter 9
Manage a White Ink Workflow...................................................................................... 125
Operator Guidelines for White Ink.............................................................................................................. 126
White Ink Workflow Overview.....................................................................................................................127
Varnish Workflow Overview........................................................................................................................130
Configure ONYX Thrive for White Ink........................................................................................................ 132
White Ink ONYX Media Profiles.................................................................................................................. 133
Prepare White Ink/Varnish Print Jobs......................................................................................................... 135
Select the Best Workflow...................................................................................................................... 135
Set Up a Printer Flood Fill..................................................................................................................... 136
Create Spot Data with the Spot Layer Tool......................................................................................... 137
How to Access the Spot Layer Tool............................................................................................... 139
Create Spot Data in Photoshop.............................................................................................................141
Prepare Spot Data in Adobe Illustrator................................................................................................ 145
How to Overprint Spot Data in Illustrator......................................................................................147
How to Place Raster Images in Illustrator......................................................................................151
How to Create a Spot Channel Path in Illustrator......................................................................... 153
How to Set Up a File for Preflight's Spot Layer Tool....................................................................155
How to Name Your Spot Data in Illustrator...................................................................................156
White Ink Quick Start....................................................................................................................................159
Print White Ink Jobs..................................................................................................................................... 161
Varnish QuickStart........................................................................................................................................166
Print Varnish Jobs........................................................................................................................................ 168
Get Good Results with Varnish................................................................................................................... 170
Chapter 10
Ink System Management............................................................................................... 173
Arizona Printer LED Ink................................................................................................................................ 174
Change Ink Bags........................................................................................................................................... 176
Contents
4

Chapter 11
Maintenance....................................................................................................................179
Maintenance Guidelines.............................................................................................................................. 180
Maintain the Printheads...............................................................................................................................181
Print a Nozzle Check...............................................................................................................................181
Recover Nozzles by AMS.......................................................................................................................183
Recover Nozzles by Swabbing..............................................................................................................184
Recover Nozzles by Wiping (Required if AMS is Non-Functional).................................................... 187
Maintain the Printer......................................................................................................................................189
Clean Horizontal Surfaces..................................................................................................................... 189
Clean the Automatic Maintenance System (AMS)..............................................................................190
Clean the Ink Spit Tray...........................................................................................................................192
Clean the Carriage Underside............................................................................................................... 193
Maintain White Ink................................................................................................................................. 195
Clean Printheads.................................................................................................................................... 196
Replace the UV LED unit Filter.............................................................................................................. 199
Remove Ink from the Table................................................................................................................... 201
Empty Ink Waste Trays.......................................................................................................................... 202
Clean UV LED Unit Quartz Window......................................................................................................206
Fill the Coolant Bottle............................................................................................................................ 207
Clean the Gantry Rails........................................................................................................................... 208
Change Ink Filter.................................................................................................................................... 210
Bleed an Ink Filter...................................................................................................................................213
Roll Media Option Maintenance..................................................................................................................216
RMO Maintenance Guidelines.............................................................................................................. 216
Clean the Rubber Capstan.....................................................................................................................217
Remove Stains (coffee, tea, soda pop, etc.).................................................................................. 218
Remove Uncured Ink on the Capstan............................................................................................ 220
Chapter 12
Troubleshooting and Support....................................................................................... 223
Troubleshooting Overview.......................................................................................................................... 224
Enable the Remote Service connection......................................................................................................225
Configure remote assistance.......................................................................................................................228
Install software updates with Remote Service...........................................................................................229
Install software updates (without Remote Service)...................................................................................231
Chapter 13
Regulation Notices......................................................................................................... 235
Appendix A
Application Information................................................................................................. 241
Application Resources on our website....................................................................................................... 242
Index.................................................................................................................................245
Contents
5

Contents
6

Chapter 1
Introduction

Notes for the reader
Typography
This manual uses the following typography to indicate elements that are part of the user
interface.
Typography Indicates
[Text between square brackets] Name of a button, tile, setting, value, or other
option of the user interface
<Text between angle brackets> • Name of a key on a keyboard
• Name of a variable: item that varies accord-
ing to the context
Text displayed in courier font • File path
• Command Prompt comment
[Text] →[displayed in] →[menucascade] Names of options to be used in a fixed order
Safety symbols
Before you use this product, make sure you read and understand the safety information that
belongs to the product. Find the safety information on "http://downloads.cpp.canon" . Also be sure
to follow all warnings and instructions marked on the product.
This manual uses the following safety symbols to indicate hazards and precautions.
Symbol Type of symbol Indicates
WARNING Indicates a warning concerning operations that may lead to
death or injury to persons if not performed correctly. To use
the machine safely, always pay attention to these warnings.
CAUTION Indicates a caution concerning operations that may lead to in-
jury to persons if not performed correctly. To use the ma-
chine safely, always pay attention to these cautions.
This indication can concern hazards that have a specific CAU-
TION symbol. The 'hot surface', 'electric shock', 'moving
parts' and 'laser beam' cautions are listed below.
CAUTION Hot surface
Indicates a caution concerning operations that may lead to in-
jury to persons if not performed correctly. To use the ma-
chine safely, always pay attention to these cautions.
CAUTION Electric shock
Indicates a caution concerning operations that may lead to in-
jury to persons if not performed correctly. To use the ma-
chine safely, always pay attention to these cautions.
CAUTION Moving parts
Indicates a caution concerning operations that may lead to in-
jury to persons if not performed correctly. To use the ma-
chine safely, always pay attention to these cautions. 4
Notes for the reader
8 Chapter 1 - Introduction

Symbol Type of symbol Indicates
CAUTION Laser beam
Indicates a caution concerning operations that may lead to in-
jury to persons if not performed correctly. To use the ma-
chine safely, always pay attention to these cautions.
IMPORTANT Indicates an operational requirement or restriction. Read
these items carefully in order to prevent damage to equip-
ment, software, data, media, or property.
NOTE Indicates a clarification of an operation, or contains additional
explanations for a procedure. Reading these notes is highly
recommended.
Body protection symbols
This manual uses the following body protection symbols to indicate that it is important to protect
yourself before performing a specific task or action.
Symbol Type of symbol Indicates
IMPORTANT Hand protection
Wear the mentioned type of gloves when you perform this
task or action.
IMPORTANT Eye protection
Use the mentioned type of eye protection when you perform
this task or action.
IMPORTANT Body protection
Wear the mentioned type of body protection when you per-
form this task or action.
IMPORTANT Foot protection
Wear the mentioned type of safety footwear when you per-
form this task or action.
Notes for the reader
Chapter 1 - Introduction 9

Available documentation and training
This manual provides the operator with information about the following Arizona 1300 Series UV
flatbed inkjet printers:
• Arizona® 1340 GT/XT
• Arizona® 1360 GT/XT
• Arizona® 1380 GT/XT
Multi-Language Support
The printer's user interface software supports multiple languages. To select your preferred
language refer to the Settings Module in Chapter 4.
This manual is available in other languages. You can download a PDF file of the manual in all of
the languages that we support from our websites: http://downloads.cpp.canon or https://
dgs.cpp.canon.
Canon on the Internet
For further information on documentation and support for your printer or for information on
other Canon products, please visit our websites: http://downloads.cpp.canon or https://
dgs.cpp.canon.
Safety Information
Safety information for handling inks, consumables, and operating the printer can be found in
Chapter 3.
Customer Service
If your printer malfunctions and you are unable to resolve the problem, field service technicians
can be dispatched to your site to conduct repairs. Service visits are paid for by the customer,
either under a maintenance agreement, by purchase order or prepayment. Time and material
rates are charged for any service not covered under a maintenance agreement. Before calling to
report a problem, gather as much information about the problem as possible and have it ready to
provide to your customer care center.
Responsibilities of the Operator
The printer operator must be properly trained. Canon provides training for the operator in the use
of the printer hardware and software at the time of installation. It is the customer's responsibility
to ensure that only properly trained personnel operate the printer. Operators must be fully versed
in the operation of ONYX Thrive®. For any operator unfamiliar with this application an ONYX
training is required. Training courses are available; contact your local Canon representative.
The operator or trained personnel are expected to handle all user maintenance and replacement
of consumable parts (except printheads), as detailed in the User Guide.
Responsibilities of the Service Technician
Field service technicians must have Canon service training. The service technician is responsible
for all repairs, upgrading and modification requested by the customer or mandated by the Canon
Service and Support Group. The service technician who installs the printer will also provide
training for the operator that covers all of the basic skills required to operate the printer.
Available documentation and training
10 Chapter 1 - Introduction

Chapter 2
Product Compliance

Product Compliance
CE Declaration of Conformity
Product Compliance
12 Chapter 2 - Product Compliance

Representative Manufacturing and Marketing for the Arizona 1300 Series in Europe:
Canon Production Printing Netherlands B.V.
Van der Grintenstraat 10,
5914HH Venlo
The Netherlands
Telephone: [phone]
Fax: [phone]
Email: [email protected]
Product Compliance
Chapter 2 - Product Compliance 13

Product Compliance
14 Chapter 2 - Product Compliance

Chapter 3
Safety Information

Safety and Environment Information
Important Safety and Environment User Information
Before using Your printing system, make sure that it is properly installed and that You have read
and understand the User Documentation in order to operate the system safely and in accordance
with its functional offerings. When using Your machine make sure to always comply with the
User Documentation.
Warning and caution indicators
In order to warn and make aware all persons operating the machine of possible risks, dangers
and/or hazards, safety warning labels have been applied where required. For safe operation it is
important to understand the meaning of any label. Make sure you read and understand all label
descriptions before you start operating the machine.
In order to avoid potential hazards, make sure that preventive and remedial maintenance is
executed by qualified and trained service technicians.
Disclaimer:
CANON PRODUCTION PRINTING MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THE
CONTENT OF THIS DOCUMENTATION AND ITS COMPLETENESS, EITHER EXPRESS OR IMPLIED,
EXCEPT AS PROVIDED HEREIN, INCLUDING WITHOUT LIMITATION, THEREOF, WARRANTIES AS
TO MARKETABILITY, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE OF USE
OR NON-INFRINGEMENT. CANON PRODUCTION PRINTING SHALL NOT BE LIABLE FOR ANY
DIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF ANY NATURE, OR LOSSES OR
EXPENSES RESULTING FROM THE USE OF THIS DOCUMENTATION.
Canon Production Printing reserves the right to revise this publication and to make changes from
time to time in the content hereof without obligation to notify any person of such revision or
changes.
The websites of the regional Canon sales offices are listed on the cover of the User
Documentation. There you can find the addresses of the local Canon sales offices.
Notes
• In some regions where this product is sold the following product name(s) may be registered as
model number(s).
Product name model number
Arizona 1340 GT
Arizona 1360 GT
Arizona 1380 GT
HYB370
Arizona 1340 XT
Arizona 1360 XT
Arizona 1380 XT
HYB380
• Depending on the context, the terms “system”, “machine”, and “equipment” used in the User
Documentation mean the Canon printing system for which this User Documentation shall
apply.
• Some consumables and materials designated to be used by this machine are accompanied
with Safety Data Sheets. Please refer to the corresponding Safety Data Sheets for specific
Safety and Environment Information and operating instructions. You may download the actual
Safety Data Sheets from the support site of your product at
"http://downloads.cpp.canon/" .
Safety and Environment Information
16 Chapter 3 - Safety Information

• The machine bears the CE-mark to show conformance with applicable legal requirements. The
relevant CE Declaration of Conformity is part of the User Documentation. You may also
download it from the support site of your product at "http://downloads.cpp.canon/" .
Canon Production Printing shall not be liable for damages from:
• Failure to comply with the User Documentation;
• Work performed incorrectly on the machine;
• Unauthorised modifications.
The following indicators are used in the User Documentation to identify and categorize the level
of the seriousness of hazard:
Symbol Type Description
WARNING Indicates a warning concerning operations that may lead to
injury or even death to persons if not performed correctly. To
use the machine safely, always pay attention to these warn-
ings.
CAUTION Indicates a caution concerning operations that may lead to in-
jury to persons if not performed correctly. To use the ma-
chine safely, always pay attention to these cautions.
IMPORTANT Indicates operational requirements and restrictions. Be sure
to read these items carefully to operate the machine correct-
ly, and avoid damage to the machine or property.
PROHIBITED Indicates an operation that must not be performed. Read
these items carefully, and make sure not to perform the de-
scribed operations.
NOTE Indicates a clarification of an operation or contains additional
explanations for a procedure. Reading these notes is highly
recommended.
Personal protection symbols
Symbol Type Description
Eye protection Use the mentioned type of eye protection when you perform
this task or action.
Hand protection Wear the mentioned type of gloves when you perform this
task or action.
Body protection Wear the mentioned type of body protection when you per-
form this task or action.
Instruction man‐
ual/booklet
Read the user documentation before you perform this task or
action.
Safety and Environment Information
Chapter 3 - Safety Information 17

The following labels are used in the machine to identify and categorize the severity level of the
hazard:
Label Type Description
WARNING General warning sign.
WARNING Risk of electric shock.
Hazardous electrical parts inside. Do not remove the cover.
CAUTION Hot part or hot surface.
Risk of burned fingers when handling the parts, do not touch.
CAUTION Crushing of hands.
or
CAUTION UV light.
CAUTION Bright light.
CAUTION Infrared light.
WARNING Electricity: Main connection for protective earth.
WARNING Electricity: Main connection for protective earth.
Label Type Description
PROHIBITED Do not walk or stand here.
PROHIBITED No access.
Label Type Description
WARNING Shock hazard.
Disconnect all power plugs from electrical outlet for pur-
poses of maintenance. 4
Safety and Environment Information
18 Chapter 3 - Safety Information

Label Type Description
WARNING High touch current.
Risk of electrical shock
Connect to earth before connecting the power supply.
Refer to installation instructions, before operating the
equipment.
Optical radiation emission
Category 2
(EN 12198)
WARNING 1. Warning: Hot surface.
Take care to avoid contact with a hot surface.
2. Warning: Optical radiation.
Take care to avoid injury to eyes and skin when in
the vicinity of optical radiation. Take precautionary
actions as described in this document.
3. Warning: Electricity.
Hazardous electrical voltage inside. Do not remove
the cover.
Translation: Optical radiation emission Category 2
1
WARNING General warning.
Moving gantry. Stay clear.
Translation: Moving Gantry
1
CAUTION Warning: Optical radiation.
Read the user documentation before you perform this
task or action.
Translation: Avoid looking directly at lamps. Optical radi-
ation according EN 12198 Category 2. Special restric-
tions and protective measures are essential when the
machine is used in the workplace. Wear eye-wear,
gloves and long sleeves when using this printer.
The type of eye protection and gloves are prescribed in
this document.
1
WARNING General warning.
Translation: For continued protection against fire and
electric shock replace only with same type and rating of
fuses.
CAUTION Warning: Electricity.
High leakage current.
The machine must always be connected to a grounded
power outlet.
Translation: High Leakage Current. Earth Connection Es-
sential before Connecting Supply
4
Safety and Environment Information
Chapter 3 - Safety Information 19

Label Type Description
1
WARNING Warning: Electricity.
Residual voltages present after power down or discon-
necting the mains voltage. Please wait 10 seconds be-
fore opening panels or covers.
Translation: Residual voltages present after power
down. Please wait at least 10 seconds before opening
panel
Persons for Machinery Directive
•Instructed person
This User Documentation describes safeguards for the protection of an instructed person.
Instructed person is a term applied to persons who have been instructed and trained by a
skilled person, or who are supervised by a skilled person, to identify energy sources that may
cause pain and to take precautions to avoid unintentional contact with or exposure to those
energy sources.
Power source
WARNING
• Put the power plug directly into a power outlet that has the same configuration as the plug.
The use of an adapter can result in an inadequate power supply. If a proper power outlet is
not available, ask a qualified electrician to carry out the installation.
• This machine has two power inlets. Do not insert both power cables in one phase group.
IMPORTANT
• Consult your authorised service representative before you connect other equipment to the
same power outlet.
• Do not connect the machine to a mains voltage or frequency which differs from the value
stated on the power marking label.
NOTE
• When a connection to a different mains voltage is required, contact your authorised service
representative.
Safety and Environment Information
20 Chapter 3 - Safety Information