Canon Business Inkjet WG7450Z User manual

3
2
1
4
Business Inkjet
WG7450Z/WG7450F/WG7450/WG7440
EN
Getting Started
FR
Démarrage
RU
Руководство по началу работы
UK
Початок роботи
AR


Business Inkjet
WG7450Z/WG7450F/WG7450/WG7440
3
2
1
4
Please read “Important Safety Instructions” before operating this product. P.45
After you finish reading this guide, store it in a safe place for future reference.
The information in this document is subject to change without notice.
Access http://ij.start.canon for the Online Manual containing
information on all the functions of this machine.
Basic Operation P.16
If a Problem Has Occurred P. 20
Installing the Machine P. 2
Network & Remote Monitoring Service Connection P. 26
EN
Getting Started

EN
<BK> <C>, <M>, <Y>
×3
Print Head and Maintenance Cartridge are set
in the machine.
* WG7450Z/WG7450F
Install on a flat level surface, providing a space of
100 mm or more around the machine.
(mm)
590100 535
560
100 100
365
Cassette Feeding Unit CF10
349
880
253
100
CAUTION!
The front cover is locked. Do not force it open.
Installing the Machine
Items Included with the
Machine Installation Requirements
2

EN
If You Purchased an Optional
Cassette Feeding Unit
First install the cassette feeding
unit (optional). Refer to the manual
bundled with the cassette feeding
unit for installation steps.
CAUTION
• Do not hold the machine by its base, as fingers
may get caught when placing the machine.
Transporting the Machine
• Four people are required to move the
machine. There are four handhold
locations around the machine. Each
person should place one hand in a
handhold and use the other hand to
stabilize the machine while lifting. To avoid
back injuries, do not bend over when
lifting. See below for handhold locations.
• Never hold the machine by the feeder (auto
document feeder), a paper drawer, etc. The
machine could be dropped and cause injury.
Front
side
Front side
1With each person standing at a corner of
the machine and a hand in one of the
handholds as shown from to , lift the
machine by bending at the knees.
Front side
Front side
Front side
Front side
Front side
3

EN
Installing the Machine
2Place the machine.
3
• Remove all 4 stickers.
After installing the optional
cassette feeding unit, continue
with the installation from step 4.
4
• Remove all of the tape.
5
6
• Remove all of the tape.
7Attach the clamp and power cord, and then
affix the power cord with the clamp.
• The shape of the power cord depends on
your country or region.
• Depending on the shape of the bundled
power cord, you may not be able to attach
a clamp. If you are unable, do not attach,
and go to the next step.
1
2
4

EN
8Attach the Protective Cover at the bottom
of the right side of the machine.
Cassette Feeding Unit
(optional) attached
9Attach the Book Pocket to either the left or
rear side of the machine.
• Store this guide here.
10
Store the glass cleaning sheet.
Attach the Handhold Cover after turning
on the machine.
5

EN 1Press <unlock> on the screen.
• Do not open the front cover until the screen
appears.
2
3Remove the Shipping Lock Pin.
4Pull out the Print Head Locking Rod.
2
1
Raise the lever (blue) in , and pull the rod out
completely in the direction indicated at .
Do not bend the rod.
Installing the Machine
Remove Packing Materials from
Inside the Machine
Initial Settings
1Turn on the machine.
(ON)
NOTE
When the machine is first powered on, a
Setup Guide with a series of screens will
appear to help you set up the machine.
If the Setup Guide does not appear, refer to
the Online Manual.
For details
"Setting Up Using the Setup Guide" in the
Online Manual
2Set the language and country/region.
• Follow the on-screen instructions.
3Set the time zone and current date/time.
For details
"Setting Up Using the Setup Guide" in the Online Manual
6

EN
5Store the Print Head Locking Rod.
• Face the blue lever portion toward you, and
then press the rod to the left and hook it.
• Place the right end on the hook.
• After placing both ends, turn the blue lever
downward to lock it.
The Print Head Locking Rod is required
during transport. Do not throw it away.
6Attach the Handhold Cover.
Use a coin to turn the screws to fasten.
7
Next, install the ink tanks.
7

EN
Installing the Machine
• Turn until tank clicks.
• Install all four ink tanks in the correct slots.
5
NOTE
• Filling begins, and takes about 40-70
minutes to complete.
• Time required for filling depends on your
environment.
• Do not turn off the machine while ink is
filling.
• If filling is interrupted by turning off the
machine, etc., additional ink tanks may be
required.
• While ink is filling, you can configure
settings up to “Adjust the margins of the
Cassette Feeding Unit (optional)” ( P.12).
Next, configure the machine to send
data and Remote UI Access PIN.
1Press <Unlock> on the screen.
• Do not open the front cover until the screen
appears.
2
3
4
Install the Ink tanks
8