Canon imagePROGRAF iPF6400S Series User manual

QT5-7282-V1 ©CANON INC. 2013 PRINTED IN CHINA
Setup Guide
ENG
Introductory Information
Series
1
Introduction Read this manual before attempting to operate the printer.
Keep this manual in a handy location for future reference.
Overview of Setup
These are the steps in printer installation.
Load Paper to Adjust the Printheads
(P.5)
How to Display the Electronic
Manuals
(P.6)
Attach the Ink Tanks (P.3)
Install the Printheads
Install the Software
(P.4)
Preparations (P.2)
Store Accessories in the Pockets
(P.11)
(P.11)
• Even if you do not use the printer driver, be sure to install Media
Configuration Tool from the provided User Software CD-ROM. With
Media Configuration Tool, the paper types that are available in your
area can be registered to the printer. For instructions on installation,
refer to "Install the Software" on page 6. (In Windows, select Install
Individual Software in the Setup Menu window to install Media
Configuration Tool only.)
MEM
O
• We recommend doing a color calibration after completing the setup
to adjust variations in the colors.
Details for each step are given in this Setup Guide. Simply follow the instructions
to install the printer.
If an error message is displayed during setup or other problems occur, refer to
"Responding to Messages" on page 12.
The Manuals Supplied with This Printer
After installing the printer as shown in this Setup Guide, refer to the
manuals for instructions on operation and maintenance.
Printed Manuals
Basic Guide
The Basic Guide describes the following information.
• Loading paper, Replacing the consumables, Control Panel menus,
and others
• Troubleshooting tips and Error messages
• Preparations for transferring the printer
Electronic Manuals
User's Guide
This guide describes advanced usage of the printer such as paper saving tips,
how to print a poster and banner with the supplied software and print quality
adjusting method, in addition to the basic instructions for printing on roll paper or
cut sheet.
Paper Reference Guide
This guide describes about the types and specifications of the available media on
the printer.
To refer to the electronic manuals Refer to "How to Display the Electronic
Manuals" (P.11)
Space Required for Installation
+300mm
+300mm
+800mm
+150mm
+150mm
Printer Installation space (W x D x H mm)
Printer alone 1527 × 1802 × 644 mm
With stand attached 1527 × 1970 × 1301 mm
With stand and spectrophotometer unit attached 1527 × 2070 × 1301 mm
MEM
O
• A space of 1300 mm in the front and 700 mm in the back are needed
to print from the front paper feed slot.
Package Contents
a
g
j
i
l
b
h
m
ck
d
e
f
a. Printer
b. Set of manuals
c. Printhead (x2)
d. 2-inch paper holder stopper
e. 3-inch paper holder stopper
f. Roll holder
g. Included paper
h. Setup Guide (this document)
i. 3-inch paper core attachment
j. Spacer for borderless printing
k. Set of CD-ROMs
l. Starter ink tanks (for first-time installation)
(Y, PC, C, GY, BK, PM, M, MBK)
m.Power cord
MEM
O
• Some of the items included in the package are not explained in this
Setup Guide, such as the spacer for borderless printing.
Keep these items in a safe place after setup because they are used in
various printing applications.
• For instructions on the included items not described in this manual, refer
to the User's Guide.
• A cable to connect the printer to a computer is not provided with the printer.
• Canon, the Canon logo, and imagePROGRAF are trademarks or registered trademarks of CANON
INC.
• Microsoft is a registered trademark of Microsoft Corporation.
• Windows is a trademark or registered trademark of Microsoft Corporation in the U.S. and/or other
countries.
• Windows Vista is a trademark or registered trademark of Microsoft Corporation in the U.S. and/or
other countries.
• Mac, Macintosh, OS X and Bonjour are trademarks of Apple Inc., registered in the U.S. and other
countries.
• All other trademarks or registered trademarks described in this Setup Guide are the property of their
respective owners.
*QT57282V1*

2
Prepare the printer for use by installing it and connecting the power cord.
Preparations
1
Install the printer. You can use the following three methods for installing the printer.
• Install without a stand on a table
Proceed to step 2.
• Install with the optional stand
Assemble the stand and install the printer referring to the Printer Stand Setup Guide included
with the stand.After installation, proceed to step 4.
• Install with the spectrophotometer unit
The stand is required if you are using the spectrophotometer unit. Assemble the stand and
install the spectrophotometer unit and printer by referring to the Printer Stand Setup Guide
and then the "SU-21 Spectrophotometer Unit Setup Guide". After installation, proceed to step 4.
MEM
O
• The stand is a standard accessory in some locations.
2
Remove the printer from the box and
remove the packing materials from the
top of the printer.
3
At least three people are needed to lift the
printer by its carrying handles (a), located
under its right and left ends, and to place
it on a table or other flat surface.
aa
• The printer weighs approximately 54 kg
and requires at least three people to lift
it by its carrying handles (a) under its
right and left ends.
4
Remove all the orange tape from the roll
feed unit (a). Remove the roll holder (b)
from the roll feed unit (a) and remove the
protective materials and all the orange
tape on the two holder stoppers (c).
b
c
a
5
Remove the orange tape on the top cover
(a) and the ejection guide (b) and all the
packing materials.
After removing the orange tape and
packing material from inside the ejection
guide (b), reattach it.
a
b
MEM
O
• If the Spectrophotometer Unit
(optional) is attached, the
Ejection Guide (b) does not need
to be reattached.
6
Lift the belt stopper (b) from the carriage
shaft (a) and pull it towards you to remove
it.
a
b
b
MEM
O
• The belt stopper is used when
transporting the printer. Keep
the belt stopper after removing
it, in case the printer needs to be
moved again.
7
Close the top cover.
8
Plug the power cord into the power supply
connector on the back of the printer and
plug the other end into an electric outlet.

3
Install the 8 ink tanks.
Attach the Ink Tanks
1
Press the Power button to turn on the
printer.
2
When the following screen appears, use
the ▲and ▼keys to select a language
and press OK.
㪈㪆㪉
Language
English
ᣣᧄ⺆
Français
Italiano
Deutsch
3
Select your local time zone and press
OK.
㪈㪆㪌
Time Zone
0:London (GMT)
+1:Paris,Rome
+2:Athens,Cairo
+3:Moscow
+4:Eerevan,Baku
4
The procedure for attaching the Ink Tanks
(guidance) is displayed on the display.
Open the Ink Tank Cover by grasping the
handles according to the display.
5
While pressing the stopper of the ink tank
lock lever inwards, open the ink tank lock
lever upwards.
6
Shake each ink tank gently 7 to 8 times
before opening its pouch.
• Failure to shake the ink tanks may
result in reduced print quality because
ink ingredients have settled on the
bottom of the tank.
7
Open the pouch and remove the ink tank.
• Never touch the ink holes (a)
or metal contacts (b). Touching
these parts may cause stains,
damage the ink tank, and
affect print quality.
a
b
• Avoid dropping the ink tank after
removing it from the pouch. Otherwise,
ink may leak and cause stains.
• Do not remove ink tanks to shake them
after they have been installed. Doing so
may cause ink to spill.
8
Insert the ink tank into the holder oriented
as shown, with the ink holes down.
• If the ink tank does not fit in the holder,
make sure the color displayed on the
label attached to the ink tank lock lever
matches the color of the ink tank, and
check the orientation of the ink tank.
9
Close the ink tank lock lever until it clicks
into place. Make sure the ink lamp lights
red.
• If the ink lamp is not lit, repeat steps 5
and 9.
MEM
O
• After you have finished attaching the
ink tanks, it may take up to 2 minutes
before the Ink Lamp lights up.
10
Repeat steps 5 to 9 to attach each of the
Ink Tanks.
Close the ink tank cover.

4
Install both printheads.
Install the Printheads
1
When the display screen shows Open
Upper Cover, open the top cover.
2
Pull the printhead fixer lever forward all
the way to open it completely.
3
Lift the printhead fixer cover to open it
fully.
4
Hold the printhead by the grips (a) as you
remove it from the pouch.
a
a
5
Remove the orange protective part (a). To
remove the other orange protective part
(b), push the grip (c) as you remove it.
a
bc
• Never touch the parts covered by the
protective parts. Doing so may damage
the printhead and affect printing quality.
• The printhead contains ink, so be
careful not to spill it once the protective
parts are removed.
• Do not reattach the protective parts
after removing them. Dispose of these
materials according to local regulations.
.
6
Insert the printhead into the carriage (b)
with the ink holes (a) up and facing the
front of the printer as shown in the figure.
Carefully push the printhead firmly into
the carriage (b), ensuring that the parts
that were covered by the protective parts
do not touch the carriage (b).
b
a
7
Pull the printhead fixer cover down toward
the front to lock the printhead in place.
8
Press the printhead fixer lever inwards
until it clicks into place.
9
Repeat steps 2 to 8 to install the second
printhead set.
Close the top cover.

5
Load the included paper and adjust the Printheads.
Load Paper to Adjust the Printheads
1
Select type of paper for printhead adj.
is shown on the display screen. Check
that Manual Paper is selected and press
OK.
Instructions on loading manual paper are
shown on the display screen.
2
Open the Paper Tray Cover (a), and then
open the Tray Extension (b).
a
b
3
Slide the Width Guide (a) to align it with
the mark for the size of paper you will
load.
a
4
Prepare one sheet of paper.
Refer to the packaging for the paper to
check which side is the printable surface.
• Return unused paper to the pouch it came
in, and store it away from heat, humidity
and direct sunlight.
5
Load one sheet, printing-side up, in the
Top Paper Feed Slot.
Insert the paper in portrait orientation until
it touches the far end of the tray lightly.
MEM
O
• If it is difficult to load from the front of
the printer, load from the back of the
printer.
6
Move the Width Guide (a) to match the
size of paper loaded.
Set the Width Guide against the edge
of the paper to prevent the paper from
becoming crooked or wrinkled.
a
7
The screen for selecting the paper type
is shown on the display screen. Press ▲
or ▼to select the type of paper loaded in
the printer.
Select Coated Paper and press OK.
Then from the menu that appears, select
HW Coated and press OK.
8
When paper advance ends, the system
is automatically filled with ink for the first
time and Printhead adjustment is started.
It takes a total of about 44 minutes.
Make use of this time by referring to
"Install the Software" on page 6 to install
the software on your PC.
MEM
O
• Charging the system with ink fills the
system from the ink tanks to the printheads.
In addition, cleaning is performed to keep
the printer in optimal condition. This may
cause the remaining ink indicator and
maintenance cartridge capacity indicator to
drop some amount. The starter ink tank is
for first-time installation. It is recommended
that you purchase replacement ink tanks
quickly.
MEM
O
After you have finished setting up the printer and installing the software, we recommend performing color calibration. Color calibration
compensates for changes in color from individual variation and aged deterioration of the printer, ensuring better color consistency. Perform color
calibration using the included paper, which is compatible with this process. For information on other compatible paper, refer to the Paper Reference
Guide.
During color calibration, on the control panel's display screen, open (settings/adj. tab) and select Adjust Printer - Calibration - Auto Adjust.
The process of color calibration takes about 10 minutes.
To use the spectrophotometer unit (optional) to perform color calibration, refer to the "Color Calibration Using the Spectrophotometer Unit (option)"
in the User's Guide.
If you use the color calibration for color adjustment, it is useful to set the function to notify the execution period (Prompt Execution). For details of
the function, refer to "Color Calibration Using the Printer Sensor" in User's Guide.
When the setup is completed, refer to the various manuals to use the printer. Refer to "The Manuals Supplied with This Printer" on page 1.
•
•
•
•
9
When printhead adjustment ends, paper
is printed with an adjustment pattern and
is ejected.
Printer setup is now complete.
MEM
O
• For how to load roll paper, refer to the Basic
Guide, to the User's Guide that can be
viewed using the procedure "How to Display
the Electronic Manuals" on page 11, or to
the instructions displayed by the navigation
function of the control panel.
Follow the procedure below to display the
navigation on how to load roll paper.
1.Press Navigate.
2.Use the ▲and ▼keys to select Load Roll
Paper and press OK.
3.Use the ▲and ▼keys to select View Op. Guide
and press OK.
The navigation starts.

6
For USB connections
• Use a USB cable that conforms to the
Hi-Speed USB specification.
• Connect the USB cable to the printer
according to the on-screen instructions
during installation of the printer driver.
If you connect the USB cable before
installing the printer driver, the printer
driver may not be installed correctly.
1
After making sure the printer is not
connected to the computer, turn the
computer on. Insert the provided User
Software CD-ROM for your operating
system in the CD-ROM drive.
2
In the Setup Menu window, click Install
Printer Driver.
MEM
O
• To choose a different language, click
Language.
3
Select the software to install in the
Installation List window, and then click
Next.
Point the mouse pointer at a software
name to display a summary of the
software.
4
In the Select Country or Region of Use
window, select the country or region of
use and click Next.
5
After reading the license agreement, click
Yes.
Install the Software
Windows
MEM
O
The following screen may be displayed
during installation depending on the
security settings of your computer.
• Select Deactivate the block and click
Next.
You can print from Windows via USB or TCP/IP (network) connections.
The installation procedure varies depending on how your printer is connected. Install the software
by following instructions below. If you connect the printer with a USB cable, refer to "For USB
connections" on page 6. If you connect the printer with TCP/IP (network), refer to "For TCP/IP (network)
connections" on page 7.
• Installation requires administrative rights (such as those of Administrator). Be sure to log on using
an account with administrative rights before installation.
<Compatible Operating Systems>
32-bit: Windows 8, Windows 7, Windows Vista, Windows Server 2008, Windows Server 2003 R2,
Windows Server 2003, Windows XP
64-bit: Windows 8, Windows 7, Windows Vista, Windows Server 2012, Windows Server 2008 R2,
Windows Server 2008, Windows Server 2003 R2, Windows Server 2003
MEM
O
• For the Windows OS, use the latest version of Service Pack.
Install the software
6
If you can agree Extended Survey
Program, click Agree.
7
If you can respond to the questionnaire,
click Next.
8
Confirm your questionnaire responses,
and click Next.

7
9
In the Printer Selection window, select
The printer is connected directly to a
computer and click Next.
10
In the Printer Installation dialog box,
select Install with USB Connection, and
click Next.
11
When the following dialog box is
displayed, make sure the printer is on and
use the USB cable to connect the printer
to the computer.
MEM
O
• If a warning message is displayed, click
Retry to try again.
• Be careful not to insert the USB cable
into the LAN port.
12
After reviewing the installation results in
the Complete Installation window, click
Next.
13
In the Finish window, select Restart my
computer now and click Restart.
When you restart the computer, the
software settings are enabled. The
software installation is now completed.
For TCP/IP (network) connections
Install the software
4
In the Printer Selection window, select
The printer is connected to computers
in a network and click Next.
When searching the available printer on
the network
After reading the precautions in the
Getting Ready window, select Find
available printers in the network and
click Next.
Proceed to step 6.
When entering the printer's IP address
manually
After reading the precautions in the Getting
Ready window, select Specify the IP
address of available printers in the
network and click Next.
Proceed to step 8.
55
• If the printer is already connected to
the network, confirm the IP address
assigned to the printer. Ask your
network administrator for further
information.
1
Use the LAN cable to connect the LAN port
on the back of the printer to the hub port.
If the printer is already connected to the
network, proceed to step 2.
MEM
O
• If the printer is on, the Link indicator
under the LAN port lights.
1000Base-T
connection
The top and bottom LEDs
light.
100Base-TX
connection
The LED on the bottom
lights green.
10Base-T
connection
The LED on the top lights
orange.
2
Make sure the printer is on.
Turn the computer on and insert the
provided User Software CD-ROM for your
operating system in the CD-ROM drive.
3
Perform procedures of steps 2-8 on page
6.

8
When searching the available printer on the network
Available printers are listed in the Search Results window.
Select a printer from the list on either their IPv4 Devices or IPv6 Devices
tabs and click Next.
Select the printer with the IP Address Status is Available, and then click
Next to start installation.
Proceed to step 9 in this case.
66
MEM
O
• The IPv6 Devices tab is displayed in Windows 8, Windows 7,
Windows Vista, Windows Server 2012, Windows Server 2008 R2,
and Windows Server 2008.
• If the printer you want to use is not displayed in the list on the IPv6
Devices tab, connect via IPv4 instead.
• If the printer you want to use is not displayed in the list of printers on
the IPv4 Devices tab, refer to "When the printer cannot be found on
the network" on page 9 to setup and configure an IP address for the
printer.
When searching the available printer on the network
In the Method of Configuring IP Addresses window, select the method of configuring the IP
address as suitable for your system.
• To configure by directly entering the IP address
Select Configure manually in Method of Configuring IP Addresses and enter the IP address.
• To have the IP addresses allocated automatically using the DHCP server function
Select Configure automatically. Note that other settings outside of the procedure are also
required. ("Using DHCP", P.9)
Once you have selected the method for configuring IP addresses, enter your preferred name for
the printer in Device Name and the installation location in Printer Location under Information
About Printer to Configure, and click Install to begin the installation.
Proceed to step 9.
77
10
In the Finish window, select Restart my
computer now and click Restart.
11
When you restart the computer, the
software settings are enabled. The
software installation is now completed.
When entering the printer's IP address manually
In the IP Address Specification window,
select either IPv4 Address or IPv6
Address to enter the printer's IP address
and click Install.
The installation process begins.
• Ask your network administrator for the
IP address, as needed.
MEM
O
• The IPv6 Devices tab is displayed in
Windows 8, Windows 7, Windows Vista,
Windows Server 2012, Windows Server
2008 R2, and Windows Server 2008.
9
After reviewing the installation results in
the Complete Installation window, click
Next.
88

9
When the printer cannot be found on the network
If your printer cannot be found when connecting to
the network for the first time, setup an IP address
for the printer and then configure it on the printer.
When ink fills the system for the first time, after
printhead adjustment is finished, specify the IP
address on the printer's control panel.
• When ink fills the system for the first
time, do not operate the printer until
printhead adjustment is finished.
1
On the tab selection screen of the control
panel, press the
▲
and
▲
keys to select
(settings/adj. tab) and press OK.
678
Tot.Print Area(m2):
Maint.C Remain.: 80%
No Paper Loaded
OK:Setting/Adj. Menu
2
Use the ▲and ▼keys to select Interface
Setup and press OK.
3
Use the ▲and ▼keys to select TCP/IP
and press OK.
4
Enter the IP address. Navigate through
the following menus using the ▲and ▼
keys on the control panel.
1.Select IPv4 and press OK.
2.Select IPv4 Settings and press OK.
3.Select IP Address and press OK.
4.Enter the IP address.
MEM
O
How to enter IP addresses
1. Press the
▲
and
▲
keys to select a
field for inputting values.
2. Use the ▲and ▼keys to input values.
• Pressing ▲increases the value by
one.
• Pressing ▼decreases the value by
one.
• Holding down either the ▲or ▼keys
continually increases or decreases
the value.
3. Press OK once you have finished.
5
Press Menu.
6
Press OK on the registration confirmation
message that appears.
The IP address is set on the printer.
Next, restart installation of the printer
driver.
7
In the Search Results window, select
Specify the IP address of available
printers in the network and click Next.
When the IP Address Specifications
window appears, follow the instructions of
"When entering the printer's IP address
manually" in step 8 to 11 on page 8 to
complete the installation of the software.
MEM
O
• If the following screen appears, click
Retry and select Specify the IP
address of available printers in
the network on the next screen that
appears.
Using DHCP
To use the DHCP server function to automatically
allocate an IP address to the printer, one of the
following settings needs to be configured. Check
with your network administrator for the settings
that match your system.
• Configure the DNS dynamic update function
• Configure the DHCP server to always allocated
the same IP address when the printer starts
This section describes how to turn on DNS
dynamic update from the control panel of the
printer.
MEM
O
• The DNS dynamic update function can
also be configured using Remote UI.
Refer to "Configuring the Printer's TCP/
IP Network Settings With RemoteUI" in
the user guide for details.
1
Perform steps 1 to 3 of the procedure in
"When the printer cannot be found on the
network" on page 9.
2
Select IPv4 or IPv6 using the ▲and ▼
keys and then press OK.
3
Select DNS Settings using the ▲and ▼
keys and then press OK.
4
Select DNS Dync update using the ▲
and ▼keys and then press OK.
5
For IPv4
Select On using the ▲and ▼keys and
then press OK.
For IPv6
1. When Use the same host name and
domain name as IPv4? is displayed,
select Off using the ▲and ▼keys and
then press OK.
2. Select Statefull Addr using the ▲and
▼keys and then press OK, and then
select On using the ▲and ▼keys and
then press OK.
3. Set Stateless Addr to On using the
same procedure as in Step 2.

10
Install the software
Macintosh
You can print from Macintosh via USB or network connections such as Bonjour or IP.
Install the software depending on your computer environment.
<Compatible Operating Systems>
OS X v10.6.8 to v10.8
• If you install the software, log onto the
computer as an administrator.
1
After making sure the printer is not
connected to the computer, turn the
computer on. Insert the provided User
Software CD-ROM for your operating
system in the CD-ROM drive.
2
On the desktop, double-click the CD-ROM
icon and then the iPF Printer Setup icon.
3
Click Next.
4
If a screen requesting the name and
password is displayed, enter the user
name and password of a user with
administrative rights and click OK (or
Install Helper on OS X v10.7 or later).
5
Select the country or region where you
are using the printer, and click Next.
6
Select the software to install and click
Next.
Move the mouse pointer near the name of
the software to display an overview of the
software.
7
After reading the software license
agreement, click Yes.
8
If you can agree Extended Survey
Program, click Agree.
9
If you can respond to the questionnaire,
click Next.
10
Confirm your questionnaire responses,
and click Next.
11
The progress of the installation is
displayed.
Once all of the installation has finished,
the screen automatically advances to the
setup screen.
Connect the printer to a computer
When the following screen is displayed, make sure that the printer is on, and then connect the printer to the computer or the network with a cable.
• For USB connections • For network connections
MEM
O
• Be careful not to insert the USB cable into the LAN port.
12

11
13
Select the method of connecting to the
printer, and click Next.
For USB connection, the printer is
automatically added and you should
proceed to step 17.
14
Click Add Printer.
MEM
O
• You can view a description of adding
printers by clicking Help.
15
Select the printer to add from Default and
click Add.
MEM
O
• It may take a long time until the printer
information is displayed on the screen.
• You can also add the printer by
specifying the IP address by selecting
IP.
Select the printer
16
Click Next.
17
Select the Execute media type update
check box and click Next.
18
Click OK.
MEM
O
• If the same model of printer is already
registered on the computer, a screen is
displayed for printer selection. Select
the desired printer and click Next.
Click Exit.
• The following screen is displayed while
the media information is being updated.
Do not perform any other operations.
When the media information has
been updated, the screen is no longer
displayed.
19
Store Accessories in the Pockets
MEM
O
• The accessory pocket is included with the
stand.
If you are using the stand, accessories such as the 3-Inch Paper Core Attachment and the Basic Guide are stored in the accessory pocket. The
Basic Guide details information such as basic printer usage, daily maintenance, and how to resolve problems. Store it so that you are able to read it
at any time.
Right-click the printer and then click
Properties (or Printer Properties).
This section describes how to display the electronic
manuals from the printer driver.
From the Start menu, open Printers
and Faxes (or Printers or Devices and
Printers).
On Windows
MEM
O
• The electronic manuals can be
displayed by clicking the link to the
product manuals from other installed
software.
How to Display the Electronic Manuals
The User's Guide and Paper Reference Guide are not included. Each of the manuals can be viewed on the web site from the links in the installed
software. An Internet connection is required to display the manuals.
1 2

12
Responding to Messages
Error messages may appear on the display screen of the control panel during printer installation. If so, it may not indicate a problem with the printer, and the issue may
be easily resolved. Common messages and the causes are listed here with corrective actions. To respond to error messages other than these, refer to the Basic Guide.
Message Cause Corrective Action
No ink tank loaded.
Check ink tank.
There is no ink tank of the indicated color in the printer. Load or reload the ink tank.
(see steps 4-10 on page 3)
Cannot recognize printhead x. The printhead is not installed. Install the printhead.
(see steps 1-9 on page 4)
Paper loaded crooked. The loaded paper is crooked. Adjust the paper. (see steps 5-6 on page 5)
No maintenance cartridge installed. The maintenance cartridge is not connected. Install the maintenance cartridge correctly.
Hardware error. xxxxxxxx-xxxx
(x represents a letter or number)
The belt stopper or the tape inside the top cover has not
been removed.
Turn off the power, open the top cover, and remove the tape and
the belt stopper, then turn the power on.
You may have encountered an error that cannot be
resolved.
Turn off the printer and wait at least three seconds before
restoring the power.
If the message appears again, write down the error code and
message, turn off the printer, and contact your Canon dealer for
assistance.
ERROR Exxx-xxxx
(x represents a letter or number)
You may have encountered an error that cannot be
resolved.
Write down the error code and message, turn off the printer, and
contact your Canon dealer for assistance.
Select the printer from the list of printers
and click Options & Supplies.
Click Utility. Click Open Printer Utility.
Click the User Manual button.
Click Support.To display the user guide, click User's
Guide.
To display the Paper Reference Guide,
click Paper Reference Guide.
Click Preferences (or Printing
Preferences) to open the Printing
Preferences dialog box that has the
name of the printer in the title.
Select the Support sheet and click the
User Manual button.
To display the user guide, click User's
Guide.
To display the Paper Reference Guide,
click Paper Reference Guide.
Click Print & Scan (or Print & Fax).
This section describes how to display the electronic
manuals from Printmonitor.
Click the System Preferences icon in the
Dock.
On Macintosh
MEM
O
• The electronic manuals can be
displayed by clicking the link to the
product manuals from other installed
software.
5
7 86
3 4
3 4 5
1 2