Canon PIXMA GM4010 User manual

Para Começar
Leia Informações Importantes e Sobre
Segurança (adendo) primeiro.
Guía de inicio
Lea primero Información de seguridad
e información importante (apéndice).
Getting Started
Read Safety and Important Information
(addendum) rst.

Go
Instalando a impressora......................................................................................................página 1
Conectando a um computador, smartphone ou tablet.................................página 4
Vídeos instrucionais
Segurando a impressora
Instalación de la impresora ...............................................................................................página 1
Conexión con un ordenador, teléfono inteligente o tableta.......................página 4
Vídeos instructivos
Cómo sujetar la impresora
Installing the Printer...................................................................................................................page 1
Connecting to a Computer, Smartphone or Tablet...............................................page 4
Holding the Printer
Instructional Videos

1
ENGLISH
Setting Up the Printer Online Setup
1. Box Contents
•
Print head • Ink bottle
•
Power cord
•
Setup CD-ROM for Windows
•
Safety and Important Information
•
Getting Started (this manual)
2. Removing Packing Materials
1 Remove and dispose of any packing materials
and orange tape.
2 Open the scanning unit / cover, remove and
dispose of the orange tape and protective
material inside.
a
b
3. Installing the Print Head
1 Open the print head locking cover on the right.
2 Take out the print head from the package and
remove the label.
3 Remove the protective tape.
4 Insert the print head into the print head holder.
5 Close the print head locking cover and press
down until it clicks.
6 Press down the joint button completely until it
clicks.
Check!

2
Setting Up the Printer
4. Pouring Ink
Important
This product requires careful handling of ink. Ink may splatter
when the ink tanks are lled with ink. If ink gets on your clothes or
belongings, it may not come o.
1 Open the ink tank cover and the tank cap.
2 Hold the ink bottle upright and gently twist the
bottle cap to remove.
3 Align the nozzle of the ink bottle with the inlet.
4 Slowly stand the ink bottle upside down and
push down to pour the ink.
• If the ink does not pour, gently remove the ink bottle
and try again.
a
b
5 Gently remove the ink bottle from the inlet.
• Be careful not to spill the ink.
b
a
6 Replace the tank cap securely, and then close
the ink tank cover.
7 Close the scanning unit / cover.
Caution
Watch your ngers.
5. Turning on the Printer
1 Connect the power cord.
Back
Important
At this time, do not connect any other cables.
2 Open the operation panel and press the ON
button.

3
ENGLISH
3 When the following screen appears, use the [
and ]buttons to select a language, and then
press the OK button.
Important
If an error appears on the screen, see "If an error message
(support code) appears on the screen" on page 3 and
follow the instructions.
6. Loading Paper
1 When the following screen appears, use the [
and ]buttons to select Yes , and then press the
OK button.
2 Remove the cassette from the printer.
3 Slide apart the paper guides.
• Slide the right paper guide to the right edge. Align
the front paper guide with the Letter or A4 mark.
4 Load paper.
• Load 2 or more sheets of Letter or A4 sized plain
paper with the print side facing down.
• Place the paper against the front paper guide, and
align the right paper guide to the width of the paper.
ab
5 Replace the cassette.
6 Pull out the paper output tray.
7 Follow the on-screen instructions, and then
press the OK button.
• Check that Ready to connect appears on the
printer's screen.
Check the support code, and then follow the
instructions if the displayed code is written below.
• 1890
The protective materials are not removed.
"2. Removing Packing Materials" on page 1
• 1470
The print heads are not installed correctly.
"3. Installing the Print Head" on page 1
• 1471
No print heads are installed.
"3. Installing the Print Head" on page 1
• 1642
There may be insucient ink.
"4. Pouring Ink" on page 2
For all other cases, refer to the Online Manual.
If an error message (support code) appears on
the screen
Support code

4
Setting Up the Printer
7-a
Computer Smartphone
Computer and
smartphone
Connecting to a Computer
If you are using multiple computers, perform these steps on each computer.
Using the Setup CD-ROM for Windows
Double click EasySetup.exe in the CD-ROM, and then continue from step 3. If you do not have an
internet connection, open the win folder in the CD-ROM and double click SETUP.exe. This will install
the printer driver.
What device are you connecting?
To use your printer without connecting to any other devices. 7-c
7-a.Connecting to a Computer
1 Access the Canon website from a
computer.
2 Select Set Up.
3 Enter your printer's model name and
click Go.
4 Click Start.
5 Click If you have already prepared
your printer, go to Connect.
Note
The following steps are for Windows (except
Windows 10 in S mode).
6 Click Download.
7 Run the downloaded le.
8 Click Start Setup.
9 Follow the on-screen instructions.
• These operations may take some time.
• To connect to a smartphone as well, see "7-b.
Connecting to a Smartphone" on page 5.

5
ENGLISH
7-b
1 Install the "Canon PRINT Inkjet/SELPHY"
app on your smartphone.
• Scan the QR code shown on
the right to access the Canon
website, and then download
the app.
2 Open your smartphone's Wi-Fi settings.
Tap the network name (SSID) that starts
with "Canon_ij_".
If "Canon_ij_" does not appear, proceed
to step 3.
(Example of iOS screen)
Connecting to a Smartphone
If you are using multiple smartphones, perform these steps on each smartphone.
Prepare the following before starting.
aEnable the Wi-Fi setting on your smartphone.
bConnect your smartphone to the wireless router (if you have a wireless router).
Refer to your smartphone and wireless router manuals for more details.
Once you have added your printer, you can print from your smartphone.
3 Open the installed app.
4 Follow the on-screen instructions in the
app to add your printer.
7-c Do Not Connect To A Device
1 Press the Stop button.
2 Select Do not connect, and then press the OK button.
3 Select Ye s , and then press the OK button.
7-b.Connecting to a Smartphone

6
Loading Paper into the Rear Tray
1 Open the rear tray cover and extend the paper
support.
b
a
2 Open the feed slot cover and slide the right-
hand side paper guide to the far right.
3 Load several sheets of paper with the print side
facing up.
4 Align the paper guide to the paper, and then
close the feed slot cover.
• Follow the on-screen instructions to set information
for the loaded paper.
Transporting Your Printer
When relocating the printer, make sure of the following. Refer to the Online Manual for details.
Check that the joint button is pressed down completely to
avoid ink leaks.
Check that the position of the ink valve lever is closed.
Pack the printer in a plastic bag in case ink leaks.
• Pack the printer in a sturdy box so that it is placed with its
bottom facing down, using sucient protective material
to ensure safe transport.
• Do not tilt the printer. Ink may leak.
• Please handle with care and ensure the box remains at
and NOT turned upside down or on its side, as the printer
may be damaged and ink in the printer may leak.
• When a shipping agent is handling transport of the
printer, have its box marked "THIS SIDE UP" to keep the
printer with its bottom facing down. Mark also with
"FRAGILE" or "HANDLE WITH CARE".

1
ESPAÑOL
Instalación de la impresora
Conguración en línea
1. Contenido de la caja
•
Cabezal de impresión • Frasco de tinta
•
Cable de alimentación
•
CD-ROM de instalación para
Windows
•
Información de seguridad e
información importante
•
Guía de inicio (este manual)
2. Retirar los materiales de
protección
1 Retire y tire los materiales de protección y la
cinta naranja.
2 Abra la cubierta/unidad de escaneado, retire
y tire la cinta naranja y el material de protección
que hay dentro.
a
b
3. Instalar el cabezal de
impresión
1 Abra la cubierta de bloqueo del cabezal de
impresión a la derecha.
2 Saque el cabezal de impresión del paquete y
retire la etiqueta.
3 Retire la cinta protectora.
4 Inserte el cabezal de impresión en el soporte del
cabezal de impresión.
5 Cierra la cubierta de bloqueo del cabezal de
impresión y presione hacia abajo hasta que
haga clic.
6 Presione hacia abajo el botón de unión
completamente hasta que haga clic.
¡Comprobar!

2
Instalación de la impresora
4. Verter la tinta
Importante
Este producto un tratamiento cuidadoso de la tinta, ya que puede
salpicar cuando se rellenan de tinta los depósitos de tinta. Es posible
que las manchas de tinta no salgan de la ropa u otras pertenencias.
1 Abra la cubierta del depósito de tinta y la tapa
del depósito.
2 Sujete el frasco de tinta hacia arriba y gire
suavemente la tapa del frasco para retirarla.
3 Alinee la boquilla del frasco de tinta con la
entrada.
4 Coloque el frasco de tinta boca abajo despacio y
empuje hacia abajo para verter la tinta.
• Si la tinta no se vierte, retire suavemente el frasco de
tinta e inténtelo de nuevo.
a
b
5 Retire suavemente el frasco de tinta de la
entrada.
• Tenga cuidado de no derramar la tinta.
b
a
6 Reemplace la tapa del depósito de manera
segura y, a continuación, cierre la cubierta del
depósito de tinta.
7 Cierre la cubierta/unidad de escaneado.
Precaución
Tenga cuidado con los dedos.
5. Encender la impresora
1 Conecte el cable de alimentación.
Atrás
Importante
En este momento, no conecte ningún otro cable.
2 Abra el panel de control y pulse el botón
ACTIVADO (ON).