Canvas MAYFIELD 068-7852-0 User manual

MAYFIELD KITCHEN CART
MODEL NO. 068–7852–0
ASSEMBLY INSTRUCTIONS
Toll-free: 1–888–670–6684
IMPORTANT: Please read and understand this manual before any assembly. Before beginning
assembly of the product, make sure all parts are present. Compare parts with packaging contents
list. If any part is missing, or if you have any questions, contact the service centre at
1–888–670–6684 (toll–free).

Made in China
Imported by Trileaf Distribution Trifeuil Toronto, Canada M4S 2B8

I
3
IMPORTANT SAFETY INSTRUCTIONS
Table of Contents 3
Important Safety Instructions 3
Parts List 4
Assembly 6
20
Technical Specifications
20
Warranty
IMPORTANT: Retain for future reference, and read carefully.
I
I
D
.
I
D
I
TOP
FENCE
I
TOP
FENCE
• This product is intended for indoor use.
•The product should be placed on flat, horizontal ground.
• Any assembly or maintenance of the product must be carried out by adults only.
•Plastic bags can be dangerous. To avoid danger of suocation keep all bags
away from babies and children.
TABLE OF CONTENTS
Warning! To reduce the risk of serious injury, read the following safety
instructions before assembling and using this product.

4 MODEL NO. 068–7852–0
Divider - 1
Adjustable shelf - 1
Drawer strip - 1
Back rail - 1
Front side strip - 2
Top trim - 1
Left side panel - 1
Right side panel - 1
Back panel - 1
Bottom - 1
Door panel - 2
Left drawer side - 2
Right drawer side - 2
Drawer back - 2
Drawer face - 2
PARTS LIST
111
12
13
14
15
16
Drawer bottom - 2
17
2
3
4
5
6
7
8
9
Top - 1
10

PARTS LIST
Door stop - 1
F
G
H
I
J
K
L
M
N
Screw 5 x 50 mm - 2
Hex wrench - 1
Castor - 3
Crosshead nut - 4
Cam bolt (large) - 16
Cam (large) - 16
Bolt M6 x 60 mm - 4
Locking castor - 2
Wood dowel 7.8 x 30 mm - 22
Glue - 2
Rail track (left) - 2
Screw 3.5 x 12 mm - 24
A
B
C
D
E
Rail track (right) - 2
O
P
Q
R
S
Screw 4 x 30 mm - 3
Hinge - 4
Handle - 2
T
Bolt M4 x 22 mm - 6
U
Shelf pin - 4
V
Cam (small) - 4
W
Wood dowel 5.8 x 30 mm - 4
X
Handle - 2
Y
Screw 3.8 x 35 mm - 8
Z
Cam bolt (small) - 4
Screw 4 x 14 mm - 20
Screw 4 x 14 mm - 24
5

6 MODEL NO. 068–7852–0
ASSEMBLY
•
•
•
•
HELPFUL HINTS
Read each section carefully before starting. It is very important that each step is performed in
the correct order. If these steps are not followed in sequence, assembly diculties will occur.
Make sure all parts are included. Most board parts are labelled or stamped on the raw edge.
Work in spacious area, preferably on a carpet, near the place the unit will be located.
Do not use power tools to assemble your furniture. Power tools may strip or damage the parts.
• Identify, sort and count the parts before beginning assembly.
• Compression dowels should be tapped in with a rubber mallet.
• Slides have a lip on the right side only.
• Back panels provide stability and support. Unit may collapse without the back panel installed.
• Clean the product with your choice of furniture polish and a soft cloth. DO NOT USE harsh
chemicals nor abrasive cleaners.
• Move your new furniture carefully. Two people are needed to lift and carry the unit to its new
location.
• Never push nor drag your furniture (especially on a carpet).
Needed for assembly:
Rubber mallet Star-head
screwdriver
Flat-head
screwdriver
2 people
Important Note:
+/- on the cam should be positioned
as shown.
Do not overtighten the cam bolt.
1. 2. 3.
4. 5.
These illustrations show how the cam fastening system works.
160°~185°

I
D
.
I
D
.
I
D
.
I
D
.
TOP
.
Step 1
Requires 1, A, B, C, D, E
Step 2
Requires 2, 3, A, B, F
TOP
TOP
ASSEMBLY
7
A
A
A
B
B
B
F
F
F
7.8 x 30 mm
1
A
A
B
B
C
C
C
D
D
D
E
E
E
E
7.8 x 30 mm 3.5 x 12 mm
180°
E
1
2
3

Step 3
Requires 1, 2, G
Step 4
Requires 1, 3, G
8 MODEL NO. 068–7852–0
ASSEMBLY
G
G
G
5 x 50 mm
1
1
2
3
G 5 x 50 mm

I
D
.
I
D
.
Step 5
Requires 4, 5, A, B, H
Step 6
Requires 6, A, B, C, E, H
ASSEMBLY
9
A
A
B
B
H
H
7.8 x 30 mm
7.8 x 30 mm 3.5 x 12 mm
x 2
A
A
B
B
C
C
C
E
E
E
4
5
6
H
H

I
I
I
I
1
Step 7
Requires 4, 6, I
Step 8
Requires 1, 6, I
10 MODEL NO. 068–7852–0
ASSEMBLY
4
6
6