Canvas JAX ZD-2055-2PKR User manual

SET OF 2
JAX CHAIR
PRODUCT NO. 168-0019-0
MODEL N0. ZD-2055-2PKR
ASSEMBLY INSTRUCTIONS
Toll-free: 1-888-670-6684
IMPORTANT: Please read this manual carefully before beginning assembly of this product.
Keep this manual for future reference.

IMPORTED BY TRILEAF DISTRIBUTION TRIFEUIL TORONTO, CANADA M4S 2B8
Made in China

IMPORTANT SAFETY INSTRUCTIONS
PART LIST
• This product is intended for domestic indoor use only.
• To avoid damage, assemble the product on a non-abrasive surface.
• Do not use power tools to assemble these chairs. Power tools may strip or damage the parts.
• Make sure that all screws are tightly fastened before the product is used.
• CAUTION: Do not exceed maximum weight capacity of 300 lbs (136.4 kgs).
• Possibility of serious injury if the chair is used improperly (not for standing, not to be used if any
leg(s) is/are not on ground, use on level ground, use for one person at a time).
Failure to follow warnings could result in serious injury.
Caution! Always keep children under close supervision while they are using or
around this product.
Never leave children unattended.
Warning! To reduce the risk of serious injury, read the following safety
instructions before assembling and using the Jax Chair.
!
1
Chair Back and Seat - 1
2
Right Leg Frame - 1
3
Left Leg Frame - 1
4
Front Crossbar - 1
5
Back Crossbar - 1
A
Hex Screw - 8
B
Hex Wrench - 1
C
Wood Plug - 2
D
Felt Pad - 4
Optional: Use wood glue to strengthen bond. *Glue not included
3PRODUCT NO. 168-0019-0 | MODEL NO. ZD-2055-2PKR

4
ASSEMBLY PREPARATIONASSEMBLY
LET US HELP YOU!
DO NOT RETURN YOUR PRODUCT TO THE STORE. CONTACT US FIRST!
1-888-670-6684 Toll-free.
If you have questions regarding your product, require warranty assistance,
or have damaged or missing parts, please contact us for assistance.
IMPORTANT: Please read and understand the manual before any assembly. Before
beginning assembly of product, make sure all parts are present. Compare parts with packaging
contents list. If any part is missing, or you have any questions, contact our Customer Service
at 1-888-670-6684.
Place all parts from the box in a cleared area. Remove all packaging materials and place them
back into the box. Do not dispose of the packing materials until assembly is complete.
Attach Front and Back Crossbars (4 and 5) to the Leg Frames (2 and 3) by inserting
the end of the crossbars (4 and 5) into the holes on the Leg Frames (2 and 3).
Secure the Back Crossbar (5) to the leg frames using two of the Hex screws (A)
provided. Tighten the screws with the Hex Wrench (B).
Step 1
Requires 2, 3, 4, 5, A, B
2 3 4 5 A B
BA
2
4
5
3

5PRODUCT NO. 168-0019-0 | MODEL NO. ZD-2055-2PKR
ASSEMBLY
Place the Chair Seat and Back (1) upside down on the edge of any working surface.
Warning: Protect the work surface to avoid scratching your chair or the work surface.
Attach the leg frames (2 and 3) to the chair seat (1) using six hex screws (A).
Tighten the screws with the Hex Wrench (B).
Step 2
Requires 1, 2, 3, A, B
Tighten all screws fully. Do not over-tighten.
Insert the wood plugs (C) into the holes in the Leg Frames (2 and 3).
Step 3
Requires 2, 3, C
Step 4
Requires 2, 3, D
1 2 3 A B
2 3 D
B
A
2
3
1
D
3
2
If Necessary, extra felt pads (D) are included that can be applied to the bottom of
the legs to prevent the stool from wobbling on uneven surfaces.

Wipe with a damp cloth. Use furniture polish on the wood as needed.
Avoid prolonged exposure to moisture.
This CANVASTM product carries a one (1) year warranty against defects in
workmanship and materials.
Trileaf Distribution agrees to replace the defective product free of charge within
the stated warranty period, when returned by the original purchaser with proof of
purchase. This product is not guaranteed against wear or breakage due to misuse
and/or abuse.
Dimensions (L x W x H) 20.5 x 20.5 x 36.25 in
52 x 52 x 92 cm
Product Weight: 11.1 kg
24.5 LB
CARETECHNICAL DATAWARRANTY
6