Car Solutions PEUGEOT PAS TD 208 User manual

PEUGEOT PAS TD
Parking Assist System
User Manual
[email protected]
car-solutions.com
car-solutions.com

Index
1. Main Spec
2. Block Diagram
3. Dimension
4. External Appearance
5. Connector Pin Assignment
6. Product Composition
7. DIP S/W Setting
8. Mode Change
9. Touch Control
10. OSD(On Screen Display) Control
11. Install Manual
12. Q & A
[email protected]
car-solutions.com
car-solutions.com

1. Main Spec.
1. Input Spec. (MULTI VIDEO INTERFACE)
-1 x Digital RGB Input (Navigation System source)
-1 x Analog RGB Input (Navigation System output)
-1 x CVBS (REAR CAMERA) Input. (Rear camera source)
-1 x CVBS (FRONT CAMERA) Input. (Front camera source)
-1 x LVDS Input. (Car Command System)
2. Output Spec.
-1 x Virtual Analog Touch (Navigation System source)
-1 x UART Digital Touch (Navigation System source)
-1 x LVDS Output (LCD Operation)
3. Power Spec.
-Input Power : 8VDC ~ 24VDC
-Consumption Power : 12Watt, Max
4. Switch Input mode
-Possible to select CAR model while switching mode by DIP S/W
-By button on the Commander in the car via CAN
[email protected]
car-solutions.com
car-solutions.com

2. Block Diagram
CAR
COMMAND
SYSTEM
CAN
LVDS
NAVIGATION
SYSTEM
LVDS
Scaler
(PIP)
COMPOSITE
TX
LVDS
REAR CAMERA
POWER
REAR CAMERA
FRONT CAMERA
RELAY
LVDS
LVDS
TX
EEPROM
MCU
CAN
RECEIVER
CAR
TFT-LCD
RX
LVDS
INTERFACE
[email protected]
car-solutions.com
car-solutions.com

3. Dimension
154mm
97mm
154mm * 97mm * 23mm
23mm
* This can change under manufacturer’s circumstance
[email protected]
car-solutions.com
car-solutions.com

4. External Appearance
LED PROGRAM
IMAGE DIP S/W
LCD-IN LCD-OUT
R-TOUCH
POWER/CAN
Digital
RGB
Analog
RGB FRONT
REAR
[email protected]
car-solutions.com
car-solutions.com

4. External Appearance
LCD-OUT LCD-IN DIP S/W IMAGE PROGRAM LED
R-TOUCH
POWER/CAN Digital
RGB
Analog
RGB FRONT
REAR
[email protected]
car-solutions.com
car-solutions.com

5. Connector Pin Assignment
*NAVI Connect
① ② ③ ④ ⑤ ⑥ ⑦
①R DATA (Red)
②G DATA (Green)
③B DATA (Blue)
④SYNC (White)
⑤GND (Black)
⑥DVB-T-IR
⑦DVD-IR
*POWER Connect
1 15
2 16
1. Battery(Yellow)
2. Battery(Yellow)
3. Rear-DET (Brown)
4. Front-DET (Blue)
5. CAN1-L (White)
6. CAN1-H (Purple)
7. CAN2-L (Blue)
8. CAN2-H (Red)
9. CAN3-L (Green)
10. CAN3-H (Orange)
11.ACC (Red)
12. Rear-VCC (Red)
13. Front-VCC (Red)
14. Mode (Green)
15. GND (Black)
16. GND (Black)
*Touch Connect
①②③④
①Y-
②X-
③Y+
④X+
[email protected]
car-solutions.com
car-solutions.com

6. Product Composition
Interface 1 EA
Power Cable 1 EA
OSD Board 1 EA
RGB NAVI Cable(7pin) 1 EA
Touch convertor Cable(KD-900) 1 EA
LVDS Cable 1 EA
[email protected]
car-solutions.com
car-solutions.com

6. Product Composition
* CarPlay Set Sales (option) –KPLAY
Interface 1 EA
Power Cable 1 EA
HDMI Cable 1 EA
Bluetooth / Wifi Antenna 2EA
Microphone 1 EA
ACC Board 1 EA
AUX Cable 1 EA
[email protected]
car-solutions.com
car-solutions.com

6. Product Composition
* CarPlay (NV17) Set Sales (option)
CarPlay Main 1 EA AUX Cable 1 EA
Power Cable 1 EA
ACC Board 1 EA
HDMI Cable 1 EA
Microphone 1 EA
[email protected]
car-solutions.com
car-solutions.com

7. DIP S/W Setting
*ON : DOWN , OFF : UP *DIP S/W Example
Peugeot 208, 2008
Peugeot 308
Citroen C4 CACTUS
Citroen C4 PICASSO
PIN FUNCTION DIP S/W Selection
1 NAVI ON : Not Used
OFF : Used
2 DVB-T(AV1) ON : Not Used
OFF : Used
3 DVD(AV2) ON : Not Used
OFF : Used
4 N.C
5 N.C
6 N.C
7
CAR type SEL Right Picture
8
[email protected]
car-solutions.com
car-solutions.com

8. Mode Change
Mode Change Steering Wheel
•To use the Streeing button. You must
select the “ON" in the menu.
•Select "OFF" when not in use.
mode change(1 second)
[email protected]
car-solutions.com
car-solutions.com

8. Mode Change
Mode Change OEM Button
208 model 308 model
•To use the OEM button. You must select
the “ON" in the menu.
•Select "OFF" when not in use.
mode change(1 second)
[email protected]
car-solutions.com
car-solutions.com

8. Mode Change
Mode Change Icon
•To use the Navi Icon. You must select the
“ON" in the menu.
•Select "OFF" when not in use.
[email protected]
car-solutions.com
car-solutions.com

9. Touch Control
OSD menu -> Utility -> Calibration
Touch control - Calibration
+ Touch according to the shape coordinates.
[email protected]
car-solutions.com
car-solutions.com

9. Touch Control
DVB-T
DVD
DVB-T/DVD Control
Press Icon
[email protected]
car-solutions.com
car-solutions.com

10. OSD (On Screen Display)
Control
MENU SEL UP DOWN
O S D c o n t r o l
MENU
Press to display when there is no OSD
screen.
When OSD screen is on, press it to EXIT or
OFF.
SEL
Item Selection, Value Selection
UP
Item up
Increase selected value
DOWN
Item down
Decrease selected value
Mode State
First Menu Second Menu Third Menu
[email protected]
car-solutions.com
car-solutions.com

10. OSD (On Screen Display)
Control
OSD Config
First Menu
Second Menu
Third Menu
Description
Config
NAVI-RGB
DIGTAL-INAVI
:
Setting the Connected NAVI Model
DVB-T(DMB)
ELT_DVBT20
:
Setting the Connected DVB-T Model
DVD
ELT_980XU Slim
:
Setting the Connected DVD Model
RearCam
AVM VIDEO
:
Setting the Connected RearCam Model
Reset
Execute
Reset to default value of Config menu
[email protected]
car-solutions.com
car-solutions.com

10. OSD (On Screen Display)
Control
OSD - Option Menu
First Menu
Second Menu
Third Menu
Description
Option
NAVI COM
HMS
FINE
:
Set up manufacturer of woodworking
device for UART Touch use
OFF
Do not use features.
RearCam-Type
OEM
Original Camera
ExtDevice
Equipped with external camera
RearCam-Power
ON
+ 12V continuous supply
AUTO
+ 12V supply only in Rear camera mode
OFF
+ 12V off
RearCam-Det
GEAR
Detected by CAN
WIRE
Detected by Rear-Det Wire
FrontCam-Type
OEM
Original Camera
ExtDevice
Equipped with external camera
FrontCam-Power
ON
+ 12V continuous supply
AUTO
+ 12V supply only in Front camera mode
OFF
+ 12V off
FrontCam-Det
GEAR
Detected by CAN
WIRE
Detected by Front-Det Wire
FrontCam-RcvOpt
ON
After RearCam shows FrontCam and returns
to previous state
OFF
Disable feature
[email protected]
car-solutions.com
car-solutions.com