Cardiac Science Powerheart AED G3 User manual

Cardiac Science
FirstSave/Power
heart G3 Manual
Get an original copy of the Cardiac Science
FirstSave/Powerheart G3 Defibrillator Operators Guide for
manufacturer information about service, available
accessories and how to use and maintain your device.

WARNING: Electric Shock and Fire Hazard.
Do not connect any telephones or unauthorized
connectors to the socket on this equipment.
Instructions for Use

CARDIAC SCIENCE AEDs INSTRUCTIONS FOR USE
1
AED OVERVIEW
Become familiar with the controls and how to use the AED properly before operating the product.
CONTENTS:
AED Overview page 1
Symbol Descriptions page 7
Safety Performance Standards page 10
How to Perform a Rescue page 13
Safety Terms and Definitions page 16
Safety Alert Descriptions page 17
STAR Biphasic Waveform page 20
Energy Levels and Patient Impedance page 21
Contact Information
page 23
AED DESCRIPTION:
The AED is a self-testing, battery-operated automated external defibrillator (AED). After applying the AED’s pads to the
patient’s chest, the AED automatically analyzes the patient’s electrocardiogram (ECG) and advises the operator to
push the button and deliver a shock if needed. For the Powerheart AED G3 Automatic, the AED automatically delivers
a shock if needed. The AED guides the operator through the rescue using a combination of voice prompts and/or text,
audible alerts, and visible indicators.
Persons authorized to operate AEDs must have training in accordance to state, province or country regulations.

CARDIAC SCIENCE AEDs INSTRUCTIONS FOR USE
2
PRODUCT MODELS
This instruction manual is for multiple, unique Cardiac Science AED models. They share a basic set of features and
differences are noted throughout the manual.
The AED warranty for defects in materials or workmanship is 7 years from date of purchase. For the full warranty
statement see the warranty paper packaged with your AED or refer to the Operation and Service manual on the Quick
Start CD-ROM.

CARDIAC SCIENCE AEDs INSTRUCTIONS FOR USE
3
RESCUEREADY® STATUS INDICATOR
The RescueReady STATUS INDICATOR does not apply to AED 9300C.
When this STATUS INDICATOR is GREEN, the AED is RescueReady. This
indicates the AED self-tests have verified the following:
•Battery has an adequate charge.
•Pads are properly connected and are functional.
•Integrity of the internal circuitry is good.
When the STATUS INDICATOR is RED, check AED pads, battery and/or call
customer service.

CARDIAC SCIENCE AEDs INSTRUCTIONS FOR USE
4
INTELLISENSE®BATTERY
INSTALLATION
•Insert battery as shown.
•Push firmly to snap into place.
•Open the lid for 5 seconds.
•The STATUS INDICATOR turns GREEN (Does not apply to 9300C).
ABOUT THE INTELLISENSE BATTERY
•When the last battery indicator (LED) is red, the battery is low. Replace the battery right away.
•A new battery typically takes 10 seconds to charge the AED to maximum energy.
•Output voltage: 12VDC (max)
•Batteries are non-rechargeable
•Lithium contents: 9.2g (max)
•Check local regulations for disposal information
MODEL FULL OPERATIONAL REPLACEMENT
GUARANTEE (FROM DATE OF INSTALLATION)
TYPICAL SHOCKS
9146 Lithium
9143 Lithium
4 Years
1 Year
up to 290 shocks
up to 100 shocks
Additionally, batteries are warranted against defects in materials and workmanship for 7 years from date of purchase.

CARDIAC SCIENCE AEDs INSTRUCTIONS FOR USE
5
PADS
The pads are already installed in the AED when shipped to you. Confirm that
that they are connected. Then, ensure that the expiration date is visible
through the clear window of the lid. Make sure the STATUS INDICATOR is
GREEN (does not apply to 9300C).
ABOUT THE PADS
•Self-adhesive, disposable pads
•Minimum combined surface area: 228cm2
•Extended length of lead wire: 1.3m
AUDIBLE MAINTENANCE INDICATOR
For all Cardiac Science AEDs 9300 series:
When the daily, weekly, or monthly self-test determines maintenance is
required, an audible beep is sounded every 30 seconds until the lid is opened,
or the battery power is depleted. Opening and closing the lid may deactivate
the beep. If the next automatic self-test does not correct the error, the beep
will be reactivated.

CARDIAC SCIENCE AEDs INSTRUCTIONS FOR USE
6
AFTER A RESCUE ATTEMPT
After transferring the patient to Advanced Life Support personnel, prepare the
AED for the next rescue:
1. Retrieve the rescue data stored in the internal memory of the AED.
2. Connect a new pair of pads to the AED.
3. Close the lid.
4. Verify the STATUS INDICATOR on the AED handle is GREEN. (Does
not apply to 9300C).

CARDIAC SCIENCE AEDs INSTRUCTIONS FOR USE
7
SYMBOL DESCRIPTIONS
The following symbols may appear in this instruction manual, on the AED, or on its optional components. Some of the
symbols represent standards and compliances associated with the AED and its use.
Dangerous Voltage: The defibrillator output has high voltage and can present a shock hazard.
Please read and understand all safety alerts in this resource guide before attempting to operate the AED.
Attention!: Identifies important information in this resource guide, on the AED, or on its component parts
regarding the safe and proper use of the AED.
Defibrillator Proof Type BF Equipment: The AED, when connected to the patient’s chest by the pads, can
withstand the effects of an externally applied defibrillation shock.
CE Mark: This equipment conforms to essential requirements of the Medical Device Directive 93/42/EEC.
The AED is protected against the effects of splashing water in accordance with IEC 60529.
Classified by ETL Semko with respect to electric shock, fire and mechanical hazards only in accordance
with UL 60601-1, CAN/CSA C22.2 No.601.1-M90, EN60601-1 and EN60601-2-4. Conforms to UL Standard
UL60601-1. Certified to CAN/CSA Standard C22.2 No. 601.1-M90.
International symbol for ON. Open the lid to turn on the AED.
Open the lid to turn ON the AED.
Indicates the AED battery status. The illuminated areas indicate the remaining battery capacity.
Check pads. The pads are missing, not connected or have compromised functionality.

CARDIAC SCIENCE AEDs INSTRUCTIONS FOR USE
8
Indicates AED requires maintenance by authorized service personnel.
When the SHOCK indicator is lit, push this button to deliver a defibrillation shock.
When the CONTINUE indicator is lit, push this button to clear the internal memory to allow storage of new
rescue data in the AED. (Only for models 9300E and 9300C not equipped with Multiple Rescue software)
A red indicator with a BLACK X means the AED requires operator attention or maintenance, and is not
RescueReady. (Does not apply to 9300C)
A green indicator without a BLACK X means the AED is RescueReady. (Does not apply to 9300C)
Use pads by this date.
Date of manufacture, year and month.
Date of factory recertification.
Latex free.
Disposable. Single patient use only.
Tear here to open.
Do not recharge battery.
Position of pads on the chest of patient.
For use by or on the order of a Physician, or persons licensed by state law.

CARDIAC SCIENCE AEDs INSTRUCTIONS FOR USE
9
Dispose of properly in accordance with all state, province, and country regulations.
Do not incinerate or expose to open flame.
Explosion Hazard: Do not use in the presence of a flammable gas, including concentrated oxygen.
Upper and lower temperature limits.
Device model number, battery model number
Lot number
Lithium sulfur dioxide
Serial communication port
Additional information is provided in the AED Operation and Service Manual.
Points to important information regarding the use of the AED.
Lift here
Manufacturer
Authorized European Representative
Symbol for the marking of electrical and electronic equipment that must be recycled.

CARDIAC SCIENCE AEDs INSTRUCTIONS FOR USE
10
SAFETY PERFORMANCE STANDARDS
DIMENSIONS
Measurement Dimension
Height 8 cm (3.3 in)
Width 27 cm (10.6 in)
Depth 31 cm (12.4 in)
WEIGHT
Model Weight with Batteries and Pads
9300 3.10 kg (6.6 lb)
ENVIRONMENTAL OPERATION AND STANDBY CONDITIONS
Atmosphere Condition
Temperature 0°C to 50°C (32°F to 122°F)
Humidity 5% to 95% (non-condensing)
Pressure 57kPa (+15,000ft) to 103kPa (-500ft)
SHIPMENT AND TRANSPORT ENVIRONMENTAL CONDITIONS (for up to 1 week)
Atmosphere Condition
Temperature -30°C to 65°C (-22°F to 149°F)
Humidity 5% to 95% (non-condensing)
Pressure 57kPa (+15,000ft) to 103kPa (-500ft)
AED MODEL 9300
The AED has been designed and manufactured to conform to the highest standards of safety and performance
including electromagnetic compatibility (EMC). The Cardiac Science AED Models 9300 and pads conform to the
applicable requirements of the following:

CARDIAC SCIENCE AEDs INSTRUCTIONS FOR USE
11
CE
CE Marked by BSI 0086 per the Medical Device Directive 93/42/EEC of European Union.
ETL
Classified by ETL Semko with respect to electric shock, fire and mechanical hazards only
in accordance with UL 60601-1, CAN/CSA C22.2 No.601.1-M90, EN60601-1 and
EN60601-2-4. Conforms to UL Standard UL60601-1. Certified to CAN/CSA Standard
C22.2 No. 601.1-M90.
Electrical, Construction, Safety and Performance Electromagnetic Compatibility (EMC)
IEC 60601-1 (1998), Amendments 1 (1991) & 2 (1995)
IEC 60601-2-4 (2002)
ANSI/AAMI DF-39 (1993)
IEC 60601-1-2 (2001)
IEC 60601-2-4 Section 36
ANSI/AAMI DF-39 (1993) Section 3.3.21
EMISSIONS
Field Standard or Compliance
E-M EN 55011/CISPR 11, Group 1, Class B
Magnetic ANSI/AAMI DF39, <0.5mT on surface, except for within 5cm of the lid magnet and the
speaker
IMMUNITY
Field Standard or Compliance
E-M IEC 61000-4-3, Level X, (20V/m)
IEC 60601-2-4, Section 36.202.3 (20V/m)
AAMI DF39, Section 3.3.21.2.1

CARDIAC SCIENCE AEDs INSTRUCTIONS FOR USE
12
IMMUNITY (CON’T)
Field Standard or Compliance
Magnetic IEC 61000-4-8 (2001)
IEC 60601-2-4 (2002), Section 36.202.8
AAMI DF39, Section 3.3.21.2.3 80A/m, 47.5Hz – 1,320Hz
ESD IEC 61000-4-2, Level 3
IEC 60601-2-4 (2002), Section 36.202.2
6KV contact discharge, 8KV air gap discharge
ENVIRONMENTAL CONDITIONS
Condition Standard or Compliance
Free Fall Drop IEC 60068-2-32 (1975) AM 2 (1990), 1 meter
Bump IEC 60068-2-29 (1987), 40g and 6000 bumps
Vibration
(Random)
IEC 60068-2-64 (1993): 10Hz – 2KHz, 0.005 – 0.0012 g2/Hz
Vibration
(Sine)
IEC 60068-2-6 (1995): 10Hz – 60Hz, 0.15 mm and
60Hz – 150Hz, 2g
Enclosure
Protection
IEC 60529 (2001), IP24
SHIPPING AND TRANSPORTATION CONDITIONS
ISTA Procedure 2A

CARDIAC SCIENCE AEDs INSTRUCTIONS FOR USE
13
HOW TO PERFORM A RESCUE
Step 1: ASSESS
The patient is unresponsive.
AND
The patient is not breathing.
CALL EMERGENCY MEDICAL SERVICES
When the patient is under 8 years of age or weighs less than 55lbs (25kg), the AED should be used with the Pediatric
Attenuated Defibrillation Pads. Therapy should not be delayed to determine the patient’s exact age or weight. See the
directions for use accompanying pediatric pads for procedure on changing adult pads to pediatric and to change
energy protocols.
STEP 2: PREPARE
•Open the AED lid.
CALL
EMERGENCY
MEDICAL
SERVICES

CARDIAC SCIENCE AEDs INSTRUCTIONS FOR USE
14
•Remove clothing from the patient’s chest.
•Ensure the skin site is clean and dry.
•Dry the patient’s chest and shave excessive hair if necessary.
STEP 3: PLACE PADS
•Tear open pad package and remove pads.
•Peel one pad from plastic liner.
•Place one pad on bare upper chest.
•Peel second pad and place on bare lower chest as shown.

CARDIAC SCIENCE AEDs INSTRUCTIONS FOR USE
15
STEP 4: ANALYZE AND SHOCK DELIVERY
For the Powerheart AED G3 9300E and FirstSave AED G3 9300C and 9300D:
(Model 9300C does not have text prompts)
(The voice/text prompts will guide you through.)
•“DO NOT TOUCH PATIENT! ANALYZING RHYTHM.”
If a shockable rhythm is detected, follow these instructions:
•“SHOCK ADVISED. CHARGING.”
•“STAND CLEAR! PUSH FLASHING BUTTON TO DELIVER
SHOCK.”
•“SHOCK DELIVERED”
•IT IS NOW SAFE TO TOUCH THE PATIENT”
For the Powerheart AED G3 Automatic 9300A:
(The voice/text prompts will guide you through.)
•“DO NOT TOUCH PATIENT! ANALYZING RHYTHM.”
If a shockable rhythm is detected, follow these instructions:
•“SHOCK ADVISED. CHARGING.”
•“STAND CLEAR! SHOCK WILL BE DELIVERED IN”
•“THREE, TWO, ONE.”
•“SHOCK DELIVERED.”
•“IT IS NOW SAFE TO TOUCH THE PATIENT.”
If the patient’s rhythm changes to a non-shockable rhythm before the actual shock is delivered, the AED will advise
that the rhythm has changed and issue the prompt “RHYTHM CHANGED, SHOCK CANCELLED.” The AED will
override the charge and initiate CPR.

CARDIAC SCIENCE AEDs INSTRUCTIONS FOR USE
16
STEP 5: CPR
•When instructed, start CPR
•Give 30 compressions followed by 2 breaths.
At the end of the CPR period, the voice prompts will direct you to repeat steps 4 and 5 if required.
SAFETY TERMS AND DEFINITIONS
BEFORE OPERATING THE CARDIAC SCIENCE AED G3
Become familiar with the various safety alerts in this section.
Safety alerts identify potential hazards using symbols and words to explain what could potentially harm you, the
patient, or the Cardiac Science AED G3.
SAFETY TERMS AND DEFINITIONS
The triangle attention symbol shown below, left, identifies the potential hazard categories. The definition of each
category is as follows:
DANGER: This alert identifies hazards that will cause serious personal injury or death.
WARNING: This alert identifies hazards that may cause serious personal injury or death.
CAUTION: This alert identifies hazards that may cause minor personal injury, product damage, or property
damage.

CARDIAC SCIENCE AEDs INSTRUCTIONS FOR USE
17
SAFETY ALERT DESCRIPTIONS
The following is a list of Cardiac Science AED safety alerts that appear in this section and throughout this resource
guide. You must read, understand, and heed these safety alerts before attempting to operate the AED.
DANGER: Fire and Explosion Hazard
Exercise caution when operating the AED close to flammable gases (including concentrated oxygen) to avoid
possible explosion or fire hazard.
WARNING: Shock Hazard
Defibrillation shock current flowing through unwanted pathways is potentially a serious electrical shock
hazard. To avoid this hazard during defibrillation abide by all of the following:
•Do not touch the patient, unless performance of CPR is indicated
•Do not touch metal objects in contact with the patient
•Keep defibrillation pads clear of other pads or metal parts in contact with patient
•Disconnect all non-defibrillator proof equipment from the patient before defibrillation
WARNING: Shock and Possible Equipment Damage
Disconnect all non-defibrillator proof equipment from the patient before defibrillation to prevent electrical
shock and potential damage to the equipment.
WARNING: Battery is Not Rechargeable
Do not attempt to recharge the battery. Any attempt to recharge the battery may result in an explosion or fire
hazard.
WARNING: Shock Hazard
Do not disassemble the AED! Failure to observe this warning can result in personal injury or death. Refer
maintenance issues to Cardiac Science authorized service personnel.

CARDIAC SCIENCE AEDs INSTRUCTIONS FOR USE
18
CAUTION: Temperature Extremes
Exposing the AED to extreme environmental conditions outside of its operating parameters may compromise
the ability of the AED to function properly. The RescueReady® daily self-test verifies the impact of extreme
environmental conditions on the AED. If the daily self-test determines environmental conditions outside of the
AEDs operating parameters, a “SERVICE REQUIRED” alert will be issued to prompt the user to move the
AED to environmental conditions within the acceptable operating parameters at once.
CAUTION: Lithium Sulfur Dioxide Battery
Pressurized contents: Never recharge, short circuit, puncture, deform, or expose to temperatures above 65°C
(149°F). Remove the battery when discharged.
CAUTION: Battery Disposal
Recycle or dispose of the lithium battery in accordance with all federal, state and local laws. To avoid fire and
explosion hazard, do not burn or incinerate the battery.
CAUTION: Use only Manufacturer Approved Equipment
Using batteries, pads, cables, or optional equipment other than those approved by the manufacturer may
cause the AED to function improperly during a rescue.
CAUTION: Possible Improper AED Performance
Using pads that are damaged or expired may result in improper AED performance.
CAUTION: Serial Communication Cable
The AED will not function during a rescue when the serial communication cable is connected to its serial port.
When the serial communication cable is connected to the AED during a rescue, the prompt “Remove Cable
to Continue Rescue” will be heard until you remove the serial communication cable.
CAUTION: Possible Radio Frequency (RF) Susceptibility
RF susceptibility from cellular phones, CB radios and FM 2-way radio may cause incorrect rhythm recognition
and subsequent shock advisory. When attempting a rescue using the AED, do not operate wireless
radiotelephones within 1 meter of the AED – turn power OFF to the radiotelephone and other like equipment
near the incident.