Cardinal gates Extra tall premier pressure gate xtppg User manual

11a

ASSEMBLY INSTRUCTIONS

3. Twist to secure gate in opening. If needed, use

wrench (F) to tighten. 4. For smooth gate operation, make sure gate is

level and the latch gap is only 1/16” (penny width).

NOTE: Too loose or tight will cause latch to not

function properly.

EXTRA TALL PREMIER PRESSURE GATE - MODEL XTPPG

FOR OPENINGS 29.5” to 32.5” (75cm - 82cm). Extensions available for wider openings. Sold separately.

1. Insert part (E) as shown on all four corners of

the gate. (Make sure flat end faces gate.) 2. Remove standard inserts on all four corners. Put

extension inserts into gate tubing and then put

standard inserts into extension, then part (E).

GATE OPERATION

FOR GREATER STABILITY

USE WALL MOUNT DISCS:(optional)

TO OPEN

Slide button back

with thumb

and lift gate

to open.

TO CLOSE

simply push

door shut.

After STEP 4, (and satisfied with gate operation) mark

placement on wall. (Using a pencil, lightly trace around

ends of part (E) that touches wall.)

THIS GATE IS NOT RECOMMENDED FOR TOP OF STAIRWAY USE.

C. D.

E. F.

FOR OPENINGS 29.5” TO 32.5” FOR OPENINGS WIDER THAN 32.5”

Tightening wrench

[ANY SIZE EXTENSION]

If using anchors, mark center circle of (D) on wall and

insert (B) in drywall. Use stick pad (C) to hold disc on

on mark. Mount disc onto wall using screw (A).

TO PREVENTSERIOUS INJURYOR DEATH, SECURELY INSTALL GATE OR EMCLOSUREAND USEACCORDING TO MANUFACTURER’S INSTRUCTIONS, NEVER USE WITHACHILDABLE TO CLIMB OVER OR

DISLODGE/OPEN THE GATE ENCLOSURE. NEVER LEAVE CHILD UNATTENDED, USE ONLY WITHTHE LOCKlNG/LATCHING MECHANISM SECURELY ENGAGED. INTENDED FOR USE WITH CHILDREN FROM 6

MONTHS- 24 MONTHS.THIS PROOUCT WILLNOT PREVENTALLACCIDENTS.TO PREVENTFALLS, NEVER USEATTOP OF STAIRS. FOR MAXIMUM SAFETY,ALWAYS KEEP GATE CLOSED WHEN NOT IN USE.

Approx. the

thickness of a

penny

A. B.

C. D.D.