CareCo 8D03030003 Programming manual

/
 Usage and Maintenance Instruions
Flexus Adjustable Bed Rail -8D03030003
No. Pa Name Quantity
1  1
2  4
  4
4  4
5  1
6  1
STEP1.
Insert part 7 into part 5. Feed part 4
through parts 3, 5 and 2. Hold part 1
by hand. Use the hex wrench to lock
part 4. Assemble part 1 and part 6 as
above.
No.
7
8
9
10
11
12
4
5
Pa Name Quantity
 1
 1
 1
 1
 1
 1
STEP2.
Insert part 1 into part 8 and insert part
7 (seat belt) into part 9. Assemble
part 8 according to the method of
STEP 1. Lock all screws tightly.
.careco.co.uk    

SAFETY INSTRUCTIONS
1. When using make sure that the seat belt is tied to the matress and the bed board, and the mattress is
pressed against the support foot.
2. When the bolts on both sides are completely inserted into the hole, the armrest frame is fixed and can
be used.
3. The maximum load must not exceed 180kg.
4. This product needs to be properly installed and used correctly. If it is installed incorrectly or used
improperly it will cause damage to the product and risk personal injury.
STEP 3.
Press part 10 into the marble and insert into part 11. Adjust the marble to the appropriate
hole position. Insert part 12 into part 7. Bind the mattress with part 12 to complete
assembly.
Note:
Apply pressure using your
hand to the area indicated by
the arrow when stretching.
Flexus Adjustable Bed Rail - ＢＤ０３０３０００３
Usage and Maintenance Instructions
www.careco.co.uk 1 Turing Court, Great Notley, Braintree, CM77 7AT, England