CareCo Adapta RR07080 Owner's manual

CareCo (UK) Ltd
Hubert Road
Brentwood
Essex
CM14 4JE
Adapta Table - RR07080
Assembly & User Instructions

Introduction
Important Safety Information
The Adapta Table can be used in conjunction with a bed or a chair,
and is ideal for reading, writing, using a laptop computer etc.
It has two height adjustable tabletops, the larger of which is angle
adjustable and has two lips to help prevent items slipping off the
table.
The table is highly portable, with a lightweight yet sturdy frame.
• Unpack and check that you have all of the parts shown.
• To avoid risk of suffocation to children or animals, dispose of the
plastic bags correctly.
• Parts of the assembly are best carried out by two people.
• The weight limit on the table is 15kg (33lb)
• When adjusting the table height/angle, the table will drop unless it
is supported.
• For maximum stability, always try to keep heavy items near the
centre of the table top.
• The table is not suitable for leaning on, standing on, sitting on or
any other similar load-bearing function.
• Periodically visually inspect the xings and re-tighten if necessary.
• It is recommended that you remove any items on the table top
before moving it.
Please read all of these instructions fully before
assembly or using.

Parts
a.
b.
c.
1.
4.
2.
5.
3.
6.
2 x Hex Bolt - M8x40
Table base
Table upright
Table top
2 x Spanner
4 x Hex Bolt & Nut- M6x15
1 x Knob - M8
1 x Hex Nut - M8
2 x Washer - M8

_
Ensure that the
‘plate’ on the bottom
of the table upright
(b) is positioned in
the direction shown.
Attach the table upright (b) to the table top
(a).
1. Position the table upright (b) onto the
plate on the underside of the table top (a).
2. Attach using 4 x M6x15mm Hex Bolt and
Nuts.
Tighten using the supplied spanners (4).
a.
a. a.
b. b.
Step 1
2.
5.
4.

With help attach the table base (c) to the
table upright (b).
Place a washer (6) on the M8 40mm Hex
Bolt (1) and insert this through the table
base (c) and the table upright (b). Tighten
using the provided spanner (4).
Insert another M8 40mm Hex Bolt up
through the table upright (b) and table
base (c). Fix using a washer (6) and nut
(3).
Tighten using the supplied spanner (4).
Assembly is now complete.
b.
b. b.
4.
4.
1.
6.
6.
3.
1.
c.
c. c.

Table Adjustment
Angle Adjustment
Height Adjustment
• Remove all items from the table tops before any adjustments.
• When adjusting the table height/angle, the table will drop unless
it is supported.
• Do not force the main table when adjusting the angle.
Loosen the side lever
(2 complete turns anti-
clockwise). Adjust the
angle as required and
re-tighten the lever
(turn clockwise) to lock
in position.
Note: To rotate the
lever out of the way
(without loosening),
press the button, pull
out the lever and
rotate as required.
Loosen the knob (turn
anti-clockwise). Adjust
to the height required
and re-tighten the knob
(turn clockwise) to lock
in position.
Side
lever
Knob

Care & Maintenance
Warranty
• The table can be wiped down with a warm damp cloth and mild
disinfectant. Do not use hot water or abrasive cleaners as these
can damage the table.
• The wooden parts of the table top may be cleaned with a
duster or dry cloth. Polish should not be used as this can cause
abrasion of the wood.
• Periodically visually inspect the xings and re-tighten if
necessary.
The Adapta Table carries a twelve month warranty from date of
delivery. This covers manufacturing and design defects. It does
not cover wear and tear and accidental damage. Please see your
dealer for full details of the warranty.
This does not affect your statutory rights.

CareCo (UK) Ltd
Hubert Road
Brentwood
Essex
CM14 4JE