CareCo CONISTON FN02010007 User manual

PRODUCT CODE:
FN02010007
USER MANUAL

CareCo (UK) Limited, 1 Turing Court, Great Notley, Braintree, CM77 7AT, England
PRODUCT CODE:
FN02010007
INTRODUCTION:
Purchaser's Agreement
By accepting delivery of this product, you agree that you will not change, alter, or modify this
product or remove, render inoperable or unsafe any guards, shields, or other safety features of
this product; or that you will fail, refuse, or neglect to install any retrot kits from time to time to
enhance or preserve the safe use of this product.
When You Receive Your Chair
Before using your chair, make sure your delivery is complete as some components may be
individually packaged. If you do not receive a complete delivery, please contact your authorized
provider immediately. Where damage has occurred during transport, either to the packaging or
content, please contact your CareCo retailer.
Product Information:
Please retain this manual for future reference, read and follow the information in the owner's
manual.
Tools: We do not recommend the use of power tools in the assembly of this product.
• Assembly Requires 2 Persons.
• Assembly Difculty: Easy.
• Maximum Weight Capacity 125 Kg
• Indoor Use Only. Maintain and store in a clean and dry environment.
• Pinch/Crush Points Hazard! Do not place objects or appendages in the path of moving parts.
• Do not place objects under the chair.

CareCo (UK) Limited, 1 Turing Court, Great Notley, Braintree, CM77 7AT, England
PRODUCT CODE:
FN02010007
Before Assembly:
• Keep this instruction manual for future
reference
• It is important to only use this product on a
rm, level surface
• Keep all small parts out of reach of children
and animals
• Make sure you have all the components,
xtures and ttings as listed in this instruction
manual
• Remove all packaging and place the
components on top of the empty box or on
a clean oor to prevent them from becoming
scratched
• Make sure you have the right tools and a
clean, dry and spacious area for assembly
Assemble on a at/rm surface to avoid
damage
• Assemble in the room you intend to use the
chair or as close as possible to that room
• Carefully follow each assembly step in the
correct order to prevent incorrect assembly
• Before use, ensure that the product is fully
assembled and only then should the screws
and bolts be fully tightened but not over
tightened
• Do not discard any packaging until the
product is fully assembled. This will avoid
disposing of any parts
• CareCo do not recommend the use of power
tools to construct this product
• Do not use or attempt to assemble this
product if parts are missing, damaged or
worn
Safety
The product you have purchased combines
state-of-the-art components with safety,
comfort and styling in mind. Please read and
follow all instructions, warnings and notes
in this manual and all other accompanying
literature before attempting to operate this
product for the rst time. If there is any
information in this manual which you do
not understand, or if you require additional
assistance for setup or operation, please
contact your authorised retailer.
Failure to follow the instructions, warnings
and notes in this manual and those located
on your product can result in personal
injury or product damage and will void the
product warranty. NOTE: If you ever lose
or misplace your copy of this manual, please
contact us and we will be glad to send you a
new one immediately.

CareCo (UK) Limited, 1 Turing Court, Great Notley, Braintree, CM77 7AT, England
PRODUCT CODE:
FN02010007
Assembly Instructions
WARNING:
DO NOT STAND ON THE PRODUCT, DO NOT USE THIS PRODUCT AS A STEP LADDER.
DO NOT USE THIS PRODUCT UNLESS ALL BOLTS, SCREWS AND KNOBS ARE FIRMLY SECURED.
PLEASE DO NOT USE A KNIFE TO OPEN ANY PARTS OF THE BOX OR PRODUCT.
B
A
A×1 B×1 C×1 D×2 E×2
F×1 G×12 H×1 I×1 J×1
D
D
DD
F
J
I
E
H
G
C
Seat Back
Screw Screw Flat washer Spring washer Allen key
M6×70MM M6×25MM M6
TN-3574
x3 screws
for each leg
B
A
A×1 B×1 C×1 D×4 E×1
F×12 G×1 H×1 I×1 J×1
E
E
DD
G
J
J
F
I
H
C
Seat Back Leg Screw
Screw
Flat washer
Spring washer Allen key Allen key
M8×50MM
M6×25MM
M6
TN-3574
x3 screws
for each leg
Front leg Back leg

CareCo (UK) Limited, 1 Turing Court, Great Notley, Braintree, CM77 7AT, England
PRODUCT CODE:
FN02010007
Warranty:
• Damage caused by use over the maximum
weight limit.
• Damage caused by neglect or improper use
(e.g. people sitting on the arms or elevated
footrest).
• Fading over time or due to prolonged
exposure to sunlight. Damage from spills
and leaks.
• Cigarette or match burns.
• Damage from collisions with wall or other
objects too close to the chair.
• Accidental tears and damage.
• Damage caused by animals (scratches/ claw
and bites/ teeth).
• Damage caused by non recommended
cleaning or maintenance.
• Unauthorised repairs or adaptations.
• In the event of issues with your chair, contact
your retailer.
• The warranty is non transferable.
• The Manufacturer reserves the right to alter,
without notice, any weights, measurements
or other technical data presented in this
manual.
• Damage caused by not adhering to the
safety, product care, assembly instructions
shown within this manual, will invalidate the
warranty.
Your new chair is covered by a warranty, please note that this does not include:
Product Care:
1.When it comes to general care, it is sufcient to brush the surface off gently from time to time
with a soft clothes brush or vacuum it off with the upholstery nozzle.
2.Stains should generally be removed immediately.
• First clean the surface dirt.
• Secondly, Wash out the stain using circular motion over a larger area and applying gentle
pressure with a white cotton cloth and lukewarm water.
• Use a mild soapy solution to remove stubborn stains. Do not in any case use chemical
cleaners or cleaners that contain solvents!
• Finally, Dab the damp areas with an absorbent cloth, then let dry as usual. Do not in any
case use a hair dryer.