Caresafe Alarm EV-07W User manual

Your GPS Smart tracker SOS pendant will come supplied with an
instrucon manual however we have simplied these instrucons
for you in this Quick User Guide. For more detailed informaon
on the features of your pendant please refer to the instrucon
manual supplied in the box.
How it works – in a nutshell
Your GPS Smart tracker SOS pendant can call loved ones with just
the push of a buon. It’s an SOS alarm that works anywhere –
not just when you’re at home like some other emergency devices.
When the SOS buon is pressed for 3 seconds the pendant
will vibrate and then immediately send an SOS ‘Help Me’ SMS
message and a GPS locaon to all emergency contacts (up to 5)
it will then then begin calling all your emergency contacts (even
000 can be a number).
The pendant has a speakerphone & microphone built in so your
loved one will hear the pendant calling the rst emergency
contact person and know help is on the way - when you answer,
they can talk back to you.
When you receive the emergency SOS text message ‘Help Me’
from your loved one it will show you the me and a link to a
Google Maps locaon, simply touch on the link and you will see
the map locaon of where your loved one is. Similar devices only
work on Wi-Fi and are only suitable for use around the home of
your loved one, this device works anywhere where there is mobile
phone coverage*.
Your GPS Smart Tracker SOS pendant is not just for the elderly, it
is ideal for the safety of children too.
Before you begin
Seng up your GPS Smart Tacker SOS pendant is simple, if
you have a mobile phone and know how to send and SMS then
you’re good to go. Using your mobile phone you will send SMS
commands to the pendant, the pendant will then in turn SMS you
back, clever huh?
Your GPS Smart Tracker SOS pendant will come with a Telstra
$2.00 Pre-Paid SIM card supplied.
Please follow the instrucons on the Telstra SIM card envelope
supplied to acvate your SIM card before you begin seng up
the pendant. You will also need to load credit on to the account.
When you acvate your SIM, be sure to select ‘phone’ and not
‘device / tablet’ which is just data only. Make sure you keep an
eye on your credit each month and ensure there’s always enough
credit available.
Make sure you have fully charged the pendant for around 2-3
hours before you begin to set up. You can either use the docking
staon supplied to charge the pendant or you can use the USB
cord supplied to plug the pendant directly into your computer or
car (if your car stereo has a USB connecon) to charge it.
Enter the GPS Smart Tracker pendant phone number (provided by
Telstra when you registered the SIM card) as a contact into
your mobile phone, you might like to call it ‘Mum’s SOS Tracker’ or
something along those lines.
Turning the pendant on & o
Press the side buon (with the lile telephone symbol) for 1
second, both the blue & green LED’s will ash rapidly.
If you ever need to turn the device o simply press the side
power buon and the SOS buon simultaneously.
Now the device will need to get an inial GPS locaon so you
might like to take it outside so it can x onto satellites. This will
only take a few seconds. You’ll know this is done when the Green
LED on the le hand side blinks quickly once every 3 seconds.
For more informaon on the meanings of the Blue & Green LED’s
refer to your user guide.
Entering the emergency contact phone numbers
You can enter up to 5 contacts into the pendant, you do not need
to enter all 5 – you may only want to enter 2 or 3, that’s
Acvated your SIM card with Telstra?
Loaded some credit onto your account?
Charged the device?
Great! Then let’s start.
Quick Reference User Guide
www.caresafealarm.com.au

enrely up to you. We suggest the last contact you enter is ‘000’
in the event none of the emergency contacts can be reached.
Send the following SMS to the pendant A1….comma… then
the phone number. Let’s assume your rst contact’s phone
number is 0444 123 456 – your SMS command prompt will be
A1,0444123456 The pendant will send you back and SMS ‘Set
mobile number 1 OK!’.
Now you can enter your next phone number by sending
the following SMS to the pendant A2….comma… then the
phone number. Let’s assume your second contact’s phone
number is 0444 123 457 – your SMS command prompt will be
A2,044123457 The pendant will send you back and SMS ‘Set
mobile number 2 OK!’.
Enter your 3rd, and 4th contact the same as above using the
command prompt A3…A4…. etc.
Entering the user’s name
You can then enter the user’s name if you wish by sending the
following SMS to.. the pendant name1….comma… user name.
Let’s assume the user’s name is Jenny – your SMS command
prompt will be name1,Jenny The pendant will send you back
an SMS ‘Add name OK!’. You might just like to call the pendant
‘Mum’ or ‘Dad’ so then just SMS name1,Mum or name1,Dad
Checking the locaon of your loved one
You can check the locaon of your loved one at any me by
sending an SMS to the pendant. Simply SMS loc to the pendant
and the pendant will reply with the date & me and a link to a
Google Maps locaon, simply touch on the link and you will see
the map locaon of where your loved one is.
Note that it is on oence to locate a person without their
consent.
Please refer to Surveillance Devices Act in your state for more
informaon on this.
The message will also show you how much baery is le on the
pendant.
Calling the pendant
You can call the pendant from any phone by simply dialling the
number on the SIM card. The pendant will ring once, vibrate
and then automacally answer so you can have a 2 way voice
communicaon with your loved one. No need for your loved
one to press any buons. You can also set the pendant to accept
incoming calls only from the numbers stored as the emergency
contacts by sending an SMS to the device Z0 This is a great
feature if the pendant is being used by kids!
To end the call you can just hang up or the wearer can simply
press the SOS key on the pendant.
You can also turn the ringer o so the device will only vibrate -
refer to Page 15 in the user guide for instrucons on how to do
this.
For more informaon on incoming call control refer to Page 9 of
the user guide.
Fall detecon
The pendant can be set to nofy your emergency contacts in
the event of a fall without the user having to press the SOS
buon. To turn on this funcon simply SMS FL12 to the device.
The device will reply ‘Falling detecon on!’. (Note: there is a
typo in the user manual supplied, the command prompt to turn
the falling detecon on is FL12 and not F12 as stated in the
instrucon manual). You can also adjust the sensivity of the fall
detecon - refer to Page 18 in the user guide.
Make sure the Outgoing Call Control is on by sending an SMS to
the device CALL1 the device will reply ‘Set call 1 OK!’
The fall down alarm needs to sense height, impact and angle.
As there is the possibility of the pendant not registering the fall
it is recommended the user always presses the SOS buon when
they have an emergency and require assistance.
Low baery
A fully charged baery will last around 3-7 days in normal mode.
If you have been making & receiving calls on the pendant the
baery will run down much quicker depending on how much
use it’s had (much like your mobile phone). When the baery is
geng low an SMS will be sent to your emergency contacts to
let them know the pendant needs to be re-charged. No more
worrying if your parent or child had remembered to charge the
pendant and if they have enough baery, YOU will always know.
For more informaon on your device please refer to
the instrucon manual supplied.
*Within the Telstra 3G mobile coverage network (98.5% of
Australia).
www.caresafealarm.com.au