Carmanah SpeedCheck 12 User manual

SpeedCheck®
RADAR SPEED SIGN USER MANUAL
Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | [e-mail] | carmanah.com
For the SPEEDCHECK-12
89840_MANUAL_TRA_SPEEDCHECK-12_RevB
SPEEDCHECK-12
(battery-only/AC-powered model)
SPEEDCHECK-12
(solar-powered model)

Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | [e-mail] | carmanah.com 2
SPEEDCHECK-12 USER MANUAL
TABLE OF CONTENTS
This page intentionally left blank.

Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | [e-mail] | carmanah.com 3
SPEEDCHECK-12 USER MANUAL
TABLE OF CONTENTS
Table of Contents
1.0 Introduction.........................................................................................................................................................4
1.1 Warranty Disclaimer ...................................................................................................................................4
1.2 Standards ...................................................................................................................................................4
1.3 Safety and Usage Precautions ...................................................................................................................5
2.0 System Overview ................................................................................................................................................6
2.1 Base Components ......................................................................................................................................6
2.2 Push Lock Operation ..................................................................................................................................7
2.3 Display Enclosure .......................................................................................................................................8
2.4 System Status LEDs...................................................................................................................................9
2.5 Rear Enclosure Options........................................................................................................................... 10
2.6 Battery Power Option............................................................................................................................... 10
2.7 Solar Kit Option........................................................................................................................................ 11
2.8 AC Power Option ..................................................................................................................................... 12
2.9 StreetHub™ Remote Monitoring Option.................................................................................................. 13
3.0 System Preparation ......................................................................................................................................... 14
3.1 Tools and Materials Required.................................................................................................................. 14
3.2 Rear Enclosure Conduit........................................................................................................................... 14
3.3 Solar Kit – Solar Panel Preparation ......................................................................................................... 15
3.4 Solar Kit – 45-degree Wedge Casting ..................................................................................................... 16
4.0 Installation........................................................................................................................................................ 17
4.1 Mounting Bracket..................................................................................................................................... 17
4.2 Rear Enclosure ........................................................................................................................................ 18
4.3 Battery-Powered Systems ....................................................................................................................... 20
4.4 AC-Powered Systems.............................................................................................................................. 21
4.5 Display Enclosure Installation.................................................................................................................. 21
4.6 Power Connections.................................................................................................................................. 22
4.7 Solar Kit – Top of Pole Mounting............................................................................................................. 24
4.8 Solar Kit – Side of Pole Mounting............................................................................................................ 25
4.9 Solar Kit – Power Harness....................................................................................................................... 26
4.10 Solar Kit – Solar Panel............................................................................................................................. 27
5.0 Display Alignment ........................................................................................................................................... 28
6.0 System Setup ................................................................................................................................................... 29
6.1 Configuration with Mobile Device ............................................................................................................ 29
6.2 Configuration with PC .............................................................................................................................. 29
7.0 Commissioning................................................................................................................................................ 31
8.0 Troubleshooting .............................................................................................................................................. 32

Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | [e-mail] | carmanah.com 4
SPEEDCHECK-12 USER MANUAL
1.0 INTRODUCTION
1.0 Introduction
The following symbols indicate important safety warnings and precautions throughout this manual:
WARNING indicates that serious bodily harm or death may result from failure to adhere to the
precautions.
CAUTION indicates that damage to equipment may result if the instructions are not followed.
NOTE suggests optimal conditions and provides additional information.
1.1 Warranty Disclaimer
This manual will familiarize you with the features, operation standards and installation of Carmanah’s
SPEEDCHECK-12 radar speed sign. Failure to comply with the use, storage, maintenance, installation or
placement instructions detailed in this manual could void the warranty.
1.2 Standards
Perform all installation, wiring, grounding and maintenance in conformance with local building and electrical
codes. Adherence to the National Electrical Code (NEC) is mandatory to comply with any certification markings.
Non-adherence to code may void the warranty.

Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | [e-mail] | carmanah.com 5
SPEEDCHECK-12 USER MANUAL
1.0 INTRODUCTION
1.3 Safety and Usage Precautions
Batteries are shipped fully charged. Use extreme caution when handling the batteries as they can
generate hazardous short-circuit currents. Remove all jewelry (bracelets, metal-strap watches,
etc.) before handling the batteries.
Solar panels produce DC electricity when exposed to light and can therefore produce an
electrical shock or burn. To render solar panels inoperative, remove them from sunlight or fully
cover their front surface with an opaque material.
Before lifting any heavy or bulky equipment, ensure the load is secured so moving parts do not
shift, and that it can be lifted as far as needed without back strain or loss of grip. Installation may
require more than one person.
Ensure the equipment is not powered during installation and wiring of the system.
Recheck all completed wiring for proper polarity prior to energizing the system.
Changes or modifications to Carmanah equipment not expressly approved by Carmanah could
void both the user's authority to operate the equipment and the warranty.
Not all traffic products are compatible with external outputs. Please contact Carmanah for
additional information and guidance when adding or replacing beacons or other hardware.
The electronic equipment used generates, uses, and radiates radio frequency energy, which can
cause radio interference.
The specifications of the products and components described in this manual are subject to
change without notice.
Product can have sharp edges. Accidental movement of hinged components can cause injury.

Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | [e-mail] | carmanah.com 6
SPEEDCHECK-12 USER MANUAL
2.0 SYSTEM OVERVIEW
2.0 System Overview
2.1 Base Components
Each Carmanah SPEEDCHECK-12 radar speed sign has the following common parts:
Display
Enclosure:
Rear Enclosure:
Mounting
Bracket:
Retaining Bolt: Display Mounts:
Contains the sign,
LED display,
strobe, radar and
electronics.
Contains the
power source (AC
or DC) and any
optional
communication
devices.
Connects the
radar speed sign
to the pole. Can
be attached with
through bolts or
banding.
Attaches rear
enclosure to
mounting bracket.
Contains all the
hardware required
to mount the
product.
DISPLAY
ENCLOSURE
MOUNTING
BRACKET
REAR
ENCLOSURE
RETAINING
BOLT
PUSH
LOCK
HANDLE
OR

Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | [e-mail] | carmanah.com 7
SPEEDCHECK-12 USER MANUAL
2.0 SYSTEM OVERVIEW
2.2 Push Lock Operation
1. To open SPEEDCHECK-12, insert included key into lock and rotate clockwise.
2. Apply diagonal pressure to the bottom right corner of the sign face then PULL on the key.
3. Once unlocked, the key can be removed.
4. Swing the display enclosure away from the rear enclosure.
5. To close, push the display enclosure against the rear enclosure and then apply diagonal pressure in the
bottom right corner of the sign face. Once fully closed then PUSH the lock to secure in place.

Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | [e-mail] | carmanah.com 8
SPEEDCHECK-12 USER MANUAL
2.0 SYSTEM OVERVIEW
2.3 Display Enclosure
The Display Enclosure is pre-assembled at the factory and contains the system electronics, radar, LED display,
strobe and sign. To view the system status LEDs, look up from below the viewing slot in the silkscreen. On the
rear of the Display Enclosure are the signs hinges, latch and power connections.
Rear View of Display Enclosure
STROBE
SYSTEM LEDs
VIEWING
WINDOW
RADAR
LOOK UP AT SIGN
FACE TO SEE
SYSTEM LEDs
POWER
CONNECTIONS
HINGES
LATCH

Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | [e-mail] | carmanah.com 9
SPEEDCHECK-12 USER MANUAL
2.0 SYSTEM OVERVIEW
2.4 System Status LEDs
Refer to the diagram and table below to determine the state of the sign.
Power Status
Vehicle Detection Status
Radar Status
System Status
LED
State
Meaning
Power Status
Off System not powered
Flashing green Battery needs charging, but is not in Low Voltage Disconnect (LVD)
Steady green
AC systems: power is good
Battery systems: battery voltage is good
Vehicle
Detection Status
Off
No vehicles being detected
Flashing green Vehicles are being detected and data is being logged
Radar Status
Off Not receiving data from the radar
Flashing green Receiving data from the radar
System Status
Off System not powered
Flashing red System is in Low Voltage Disconnect (LVD)
Flashing green No system faults
Steady red
One or more system faults (radar, Bluetooth, real-time clock, display
LEDs, strobe)

Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | [e-mail] | carmanah.com 10
SPEEDCHECK-12 USER MANUAL
2.0 SYSTEM OVERVIEW
2.5 Rear Enclosure Options
The rear enclosure comes in a variety of options shown below which could include a Carmanah solar power kit
and/or StreetHub™ remote monitoring:
2.6 Battery Power Option
Offering a more portable solution for temporary installations, this sign option comes with a battery(s) that has the
harness(es) pre-installed for ease of assembly. Battery state of charge can be checked via the SpeedCheck
Manager mobile app.
•For battery-powered signs, the batteries will have to be charged as needed.
•The included battery charger and adapter cable can charge one battery at a time.
•The battery charger must be connected to an AC power source.
•Depending on the state of charge of the battery, it can take up to 11 hours to fully charge.
Spare fuse is included with each battery.
One Battery
Two Battery
One Battery
with StreetHub
AC Power
with StreetHub
AC Power

Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | [e-mail] | carmanah.com 11
SPEEDCHECK-12 USER MANUAL
2.0 SYSTEM OVERVIEW
2.7 Solar Kit Option
The solar kit offered for the SPEEDCHECK-12 contains the following items:
Housing: Gasketed Cover:
45-degree Wedge
Casting:
Solar Panel:
Contains the battery
charge controller and
provides mounting for the
solar panel.
Seals the housing
under the solar panel to
provide a NEMA 3R
rated enclosure.
Connects the housing
and the pole mount.
Includes a drilling
mark to locate the
hole for an optional
conduit fitting.
High-quality framed
solar panel sized for
location.
Pole Mount Kit:
Battery Harness:
Hardware Kit:
Different versions
are available
depending on pole
size and mounting
orientation.
Connectorized harness to
connect charge controller
to the batteries located in
the SPEEDCHECK-12
rear enclosure.
Contains this guide and all the
hardware required to assemble the
product.

Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | [e-mail] | carmanah.com 12
SPEEDCHECK-12 USER MANUAL
2.0 SYSTEM OVERVIEW
2.8 AC Power Option
Signs powered by AC are ready to be wired with appropriately rated cables:
BREAKER
POWER
SUPPLY
AC
INPUTS

Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | [e-mail] | carmanah.com 13
SPEEDCHECK-12 USER MANUAL
2.0 SYSTEM OVERVIEW
2.9 StreetHub™ Remote Monitoring Option
The SPEEDCHECK-12 is available in a StreetHub model that includes a fully-integrated monitoring unit from the
factory and Glance cloud-based software for two-way communication of real time status in the field. For additional
information, refer to https://carmanah.com/streethub-remote-connectivity/.
1. For solar kit versions equipped with StreetHub, there is a length of yellow sensor wire to be routed with
the battery harness from the solar kit to the LED display.
2. This sensor wire is pre-installed to the Solar positive (+) terminal of the charge controller.
3. Once the sensor wire is inside the rear enclosure, connect it to the yellow wire shown below.
+ SOLAR SENSOR WIRE

Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | [e-mail] | carmanah.com 14
SPEEDCHECK-12 USER MANUAL
3.0 SYSTEM PREPARATION
3.0 System Preparation
3.1 Tools and Materials Required
The following tools and materials may be required to mount your Carmanah SPEEDCHECK-12 depending on the
model and configuration:
a. Imperial socket set
b. Crescent wrench
c. Fish tape
d. Level
e. Compass or pre-determined equatorial
direction (for solar powered displays)
f. Drill and drill bits / step drill
g. Fine-tip felt marker
h. Multi-bit screwdriver
i. Ladder or lift device
j. Banding tool and material
k. Smartphone or laptop
Download the SpeedCheck Manager mobile app to configure the SPEEDCHECK-12 here:
https://carmanah.com/appSC.
3.2 Rear Enclosure Conduit
1. If system is solar-powered, use one of the indentations shown to drill and deburr a 1-1/8” hole for the
included conduit fitting either in back or bottom of rear enclosure and install.
2. For AC systems, source and install a conduit fitting with liquid tight conduit as required in one of the
above locations.

Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | [e-mail] | carmanah.com 15
SPEEDCHECK-12 USER MANUAL
3.0 SYSTEM PREPARATION
3.3 Solar Kit – Solar Panel Preparation
1. Install grommet in cover hole, ensuring it is fully seated against cover face.
2. Secure cover to solar panel using 3x supplied push-in rivets.

Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | [e-mail] | carmanah.com 16
SPEEDCHECK-12 USER MANUAL
3.0 SYSTEM PREPARATION
3.4 Solar Kit – 45-degree Wedge Casting
1. If required, drill hole at marked location and install appropriate conduit fitting on casting. Remove any
chips or shavings.
2. Apply supplied 4.5” long adhesive gasket strip to correct edge of 45-degree wedge casting for side of pole
or top of pole mounting orientation.
3. Side of pole mounting only: roll up 2x 1” long supplied butyl rubber strips and use to plug openings of
casting as shown. Also apply 2” long strip of gasket to hub plate above hole to prevent any water ingress.
Failure to apply gaskets and sealant could result in water entry in the housing or conduit (if used)
and cause damage to the product.
Top of Pole
gasket location
Side of Pole
gasket location

Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | [e-mail] | carmanah.com 17
SPEEDCHECK-12 USER MANUAL
4.0 INSTALLATION
4.0 Installation
4.1 Mounting Bracket
1. Enclosure mounting bracket is labeled to identify the correct orientation when installing onto pole.
2. Install mounting bracket onto pole 7-10ft above grade noting orientation as indicated by label.
3. Two potential attachment methods are shown below: through bolting and banding.
Use only Carmanah approved high-strength band clamp or commercial banding for mounting
bracket to pole.

Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | [e-mail] | carmanah.com 18
SPEEDCHECK-12 USER MANUAL
4.0 INSTALLATION
4.2 Rear Enclosure
1. Hold the rear enclosure as indicated.
2. Line up the hooks on the back of the rear enclosure so that they will slide into cradle features on the
mounting bracket when the rear enclosure is lowered onto the bracket.
3. When installed correctly, the rear enclosure should hang securely from the mounting bracket and the hole
at the back of the rear enclosure should then line up with the threaded insert of the mounting bracket.

Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | [e-mail] | carmanah.com 19
SPEEDCHECK-12 USER MANUAL
4.0 INSTALLATION
4. To attach the rear enclosure to the mounting bracket, thread the retaining bolt into the location shown.
5. Install retaining bolt until it is sufficiently tight. Do not overtighten.
For battery and solar-powered versions, tighten the retaining bolt so that the handle is horizontal.

Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | [e-mail] | carmanah.com 20
SPEEDCHECK-12 USER MANUAL
4.0 INSTALLATION
4.3 Battery-Powered Systems
1. Undo battery strap(s) and install provided battery(s) in the orientation shown.
2. Secure battery strap(s) to hold battery(s) in place.
If the SPEEDCHECK-12 has been supplied with a Carmanah solar power kit, route the battery cable from the
solar housing to the sign through the pole internally. Drill an appropriate hole near the rear enclosure and route
the power cable through provided conduit.