
ECO OPERATION
9
TIMER OPERATION
PLASMA ION OPERATION
11
10
Set the timer when the air conditioner is operating.
Daily timer allows the user to set both the ON & OFF timers and will be
activated on a daily basis.
Setting the ON Timer Setting the OFF Timer
1
Press : Set the desired
ON timer.
Press : Set the desired
OFF timer.
2
Press : Set the timer. Press : Set the timer.
3
Press : Cancel the timer. Press : Cancel the timer.
Setting Daily Timer
1
Press : Set the ON timer.
3
Press .
2
Press : Set the OFF timer.
4
Press button during
the ( or ) mark flashing.
● During the daily timer is activating, both arrows ( , ) are indicated.
Note:
●Keep the remote control in accessible transmission to the indoor unit;
otherwise, the time lag of up to 15 minutes will occur.
● The setting will be saved for the next same operation.
DISPLAY LAMP BRIGHTNESS ADJUSTMENT
12
To decrease the display lamp brightness or turn it off.
1. Press and hold for 3 seconds until brightness level ( , ,
or ) is shown on remote control LCD then release the button.
2. Press Rise or
Decrease
to adjust brightness in 4 levels.
● In the examples of and , the lamp illuminates for 5 seconds before
going off.
Remote control
LCD Operation display Brightness
Lamp illuminates full brightness.
100%
Lamp illuminates 50% brightness.
50%
Lamp illuminates 50% brightness and the operation lamp
is turned off.
50%
All lamps are turned off.
All turned off
TEMPORARY OPERATION
13
In case of the misplaced or discharged remote control
● Pressing the RESET [OPERATION] button,
the unit can start or stop without using the
remote control.
● Operation mode is set on AUTOMATIC operation,
preset temperature is 24°C and fan operation is
automatic speed.
PRESET OPERATION
14
Set your preferred operation for future use. The setting will be memorized by
the unit for future operation (except airflow direction).
1. Select your preferred operation.
2. Press and hold for 3 seconds to memorize the setting.
The mark displays.
3. Press : Operate the preset operation.
AUTO RESTART FUNCTION SETTING
15
This product is designed so that, after a power failure, it can restart
automatically in the same operating mode as before the power failure.
Information
The product is shipped with Auto Restart function in the ON position.
Turn it OFF if this function is not required.
How to turn OFF the Auto Restart Function
• Press and hold the RESET [OPERATION] button on the indoor unit for
3 seconds (3 beep sounds but OPERATION lamp does not blink).
How to turn ON the Auto Restart Function
• Press and hold the RESET [OPERATION] button on the indoor unit for
3 seconds (3 beep sounds and OPERATION lamp blink 5 time/sec for
5 seconds).
Note: • In case of ON timer or OFF timer are set, AUTO RESTART
OPERATION does not activate.
• Default setting of AUTO RESTART OPERATION is ON.
ECO SLEEP OPERATION
16
For comfortable sleep, automatically control air flow and automatically turn OFF.
Press
ECO
SLEEP
: Select 1, 3, 5 or 9 hrs for OFF timer operation.
Note: The cooling operation, the set temperature will increase automatically
1 degree/hour for 2 hours (maximum 2 degrees increase).
To automatically control room temperature to save energy (except in DRY and
FAN ONLY mode)
Press : Start and stop the operation.
Note: Cooling operation; the set temperature will increase automatically
1 degree/hour for 2 hours (maximum 2 degrees increase).
For heating operation the set temperature will decrease.
Capture efficiency of floating impurities in the air is accelerated by plasma ion
contaminates such as bacteria, odor, smoke, dust and virus are caught and
deactivated by Plasma lon.
When stopping operation.
● After stopping, automatic cleaning starts
(TIMER lamp turns on).
When operating time is 10 minutes
or less, cleaning function does not operate.
When using together with the air conditioning
Air volume and direction setting of air conditioner have priority.
Operation
● Operate Plasma lon while air conditioning.
Press the botton.
Stop
●Stop both Plasma lon and air conditioning.
Press the botton.
●Stop only Plasma lon.
Press the botton.
Note : Plasma lon operation does not remove harmful substances from
cigarette smoke (carbon monoxide etc.). Open a window occasionally
for ventilation.
EN
or