Carromco Foosball 522.03 User manual

Quality Family Games
Partially Assembled
Signature Model 522.03, 525.03, 530.03
Foosball Instructions
Visit www.carrom.com to register your product to receive the latest product
updates, special offers, and other product related information.
Product Registration

Parts Identier - Preassembled
Cabinet Side
2 Pieces
Ball Return
2 Pieces
#1 #8 #14
Leg Leveler Insert
4 Pieces
#2
#4
Goalie End Board
White Inside
2 Pieces
#5
Goalie Cover Plate
2 Pieces
#6
Playeld
1 Piece
#7
#6 x 5/8” Flat Head Screw
4 Pieces
#9
Mounting Flange
4 Pieces
#11
#8 x 1/2” Lg Pan Head
Screw
16 Pieces
#16
Leg Leveler
4 Pieces
Outer Bearing
16 Pieces
Inner Bearing
16 Pieces
#25
Wood Handle
8 Pieces
#28
#10-32 x 3/4” Pan Head
Bolt
8 Pieces
#33
#8 x 3” Washer Head Screw
24 Pieces
#34
#6 x 1” Pan Head Screw
8 Pieces
#35
Support Strip
1 Piece
Comes preassembled
in cabinet side.
#38
#6 x 3/8” Flat Head Screw
(8) Pieces
4 for Ball Entry Cup #17
1
#18
#19
Cabinet End
2 Pieces

#3
#12 Double Headed Screw
8 Pieces
#10
Chrome Tube
2 Pieces
3/8”-16 x 2” Hex Head Bolt
16 Pieces
#12
#13
3/8” USS Washer
16 Pieces
#17
Ball Entry Cup
2 Pieces
#20
Drink Holder Assembly
4 Pieces
#21
Bead Scoring Assembly
2 Sets
#22
3-Man Rod
4 Pieces
#23
2-Man Rod
2 Pieces
#24
5-Man Rod
2 Pieces
#26
Nylon Washer 1-1/2”
16 Pieces
#27
Rubber Bumper
16 Pieces
#29
Players
26 Pieces
#30
Rod End Cap
8 Pieces
#31
#8-32 x 1-1/8” Machine Screw
26 Pieces
#32
Nylon Nut
30 Pieces
Metal Rings
4 Pieces
#40
#8-32 x 1-14” Machine
Screw for Metal Rings
4 Pieces
2
Parts Identier - To Assemble
Leg - 25 1/2”
4 Pieces
#37
Triangular Ramp
4 Pieces
Foosball Balls
6 Pieces
#39
#15

3
Step 1
Place the preassembled Foosball cabinet
upside down (Green playeld facing
down) on the oor in the area that you will
be playing the game. The table will need
to be partially assembled upside down
and then turned over onto its legs. This is
a heavy game, turning it over will require
at least two strong adults.
Step 2
Remove all contents from box and
verify you have all of the parts shown
on the parts identier before you start
to assemble. Some parts are already
assembled for your convenience.
TOOLS REQUIRED: 9/16” Wrench, Phillips Screwdriver and a Level.

4
3
16
15
Step 3
With the cabinet upside down, attach 1
of the 4 LEGS (item #15) by using (4)
3/8 – 16 X 2” HEX HEAD BOLTS (item
#12), with (4) 3/8” USS WASHERS (item
#13). Line up the holes in the leg to the
pre-drilled holes in the cabinet with the
MOUNTING FLANGE (item #9) facing
inward toward the other short corner. Insert
one CHROME TUBE (item #10) into the
FLANGE on the 2nd leg and align into the
FLANGE on the 1st leg then attach the leg
by repeating the steps for the 1st leg.
Repeat for the other end of the table.
*Hand tighten bolts while table is
upside down, after turning the table
over, tighten bolts with a wrench.
10
1
9
13
12
14
Fig. 4
11
13
13
12
14
10
15
3

5
It takes at least TWO STRONG ADULTS to lift the table assembly from the
oor and turn it over without putting weight on the legs. Set table in the
location where you will play. Check to make sure all leg bolts are tight.
Turn table over like this Not like this
IF TABLE IS PLACED ON AN ANGLE TO THE FLOOR,
TABLE MAY BECOME DAMAGED.
38
17
Step 4
Turn the table over and level the game. Level the game by turning the LEG LEVELERS
(item #16) either in or out to raise or lower the corners. The table should be leveled in
both the lengthwise and width direction.
Fig. 5
Step 5
Press the BALL ENTRY CUP (item #17) into the center hole of each side of the table.
Screw #6 x 3/8” Flat Head Screw (item #38) in to screw holes. See Fig 5.
CAUTION! SAFETY COMES FIRST!
TABLE IS VERY HEAVY.

6
Step 6
Assemble the SCORE ROD, SCORE
BEADS & SCORE END PIECES (item
#21) to the top on the end panel by
centering the scorer over the holes in
the GOALIE COVER PLATE (item #5)
and fasten with (2) screws (provided in
accessory box) to the top of the end panel.
No pre-drilling is necessary.
Step 7
Screw in the (8) DOUBLE HEADED
SCREWS (item #3) into the bottom holes
of each side & end. (The drink holder
corners have slots that will slide over
these screws.) Attach (4) DRINK HOLDER
CORNERS (item #20) to each corner of
the cabinet by sliding them down over the
top edge of the cabinet. Attach the drink
holder corners by carefully engaging the
(2) double headed screws on the corners
of the cabinet with the slots on the inside
of the corners. Drink holder corners should
t snugly.
Player and Rod Assembly Tips:
IMPORTANT: RODS MUST BE CLEANED PRIOR TO ASSEMBLY! WIPE DOWN
THE RODS WITH A CLEAN SOFT CLOTH TO REMOVE ANY DUST OR EXCESS
LUBRICANT.
THE HEXAGON OPENING IS THE “BACK” OF THE PLAYER. MAKE CERTAIN
THAT ALL PLAYERS FACE THE OPPOSING GOAL. SEE FIG. 6
YOU MAY SET UP YOUR GOALIES IN ONE OF TWO WAYS.
FOLLOW THE APPROPRIATE INSTRUCTIONS PER YOUR PREFERENCE.

7
Step 8
Work from one side of the table, and start with the BLACK or YELLOW PLAYERS (item
#32). Notice that there are three different types of RODS (items #22, #23, and #24), for
each team. Select (2) 3-MAN RODS (item #22), (1) 2 MAN ROD (item #23), and (1) 5
MAN ROD (item #24).
3 Man Goalie Setup
Insert one 3 MAN ROD (item #22) into the PLASTIC BEARING (items #18 & #19) in
the far corner hole on the left side of the table. See Fig. 7. Next, slide onto the rod,
one by one, (1) RUBBER BUMPER (item #27), (1) WASHER (item #26), (3) TEAM
PLAYERS (item #29), (1) WASHER (item #26), and (1) RUBBER BUMPER (item
#27). Position goalie so his back is towards nearest goal. Now push rod through other
bearing on opposite side of game. Attach END CAP (item #30).
Single Goalie Setup
Insert one 3 MAN ROD (item #22) into the PLASTIC BEARING (items #18 & #19) in
the far corner hole on the left side of the table. See Fig. 7. Next, slide onto the rod,
one by one, (1) RUBBER BUMPER (item #27, (1) WASHER (item #26), (1) STOP
RING (item #36), (1) TEAM PLAYER (item #29), (1) STOP RING (item #36), (1)
WASHER (item #26), and (1) RUBBER BUMPER (item #27). Position goalie so his
back is towards nearest goal. Secure the STOP RINGS with the #8 - 32 x 1-14”
Machine Screws (Item #40). Now push rod through other bearing on opposite side of
game. Install (1) TRIANGULAR RAMP (item #37) in each corner by securing the tape
to the playeld, sides, and ends.
ASSEMBLY OF REMAINING RODS
BE SURE ALL TEAM PLAYERS ARE FACING SAME DIRECTION AS THEIR GOALIE!
Insert RODS (item #23, #24 and #22) into the second, fourth and sixth holes
respectively, counting from the far left corner. See Fig. 7. Slide onto the rod using the
same sequence of (1) RUBBER BUMPER (item #29), (1) WASHER (item #27), and
appropriate number of BLACK or YELLOW TEAM PLAYERS (item #29). Repeat with
yellow or black team players, all facing same direction as their goalie. Please refer to
the illustrations on pages 9 and 10 for the correct number of players.
Attach BLACK or YELLOW TEAM PLAYERS (item #29 facing same direction as their
goalie to the holes in rod with #8 – 32 X 1-1/8” MACHINE SCREW (item #31) and
NYLON NUTS (item #36). Push (1) END CAP (item #32) on end of rod.

8
Fig. 6
FRONT BACK
26
27
28
25
23
22
31
32
21
22
24
23
22
22
24
14
16
Please note:
On single goalie setup the
outer goalie players are
replaced by stop rings.
28
Fig. 7

9
Single Goalie Setup

10
3 Man Goalie Setup

11
CONGRATULATIONS!
You have now assembled your Carrom Foosball
Game Table.
Please note the Care and Use Instructions below to
ensure years of trouble-free use of your game table.
CARE AND USE
1. This product is intended for INDOOR use only.
2. Do NOT sit, climb, or lean on the table.
3. Do NOT drag the table when moving it as this will damage the legs.

12
Thank you for purchasing one of our games!
Like us on Facebook at
www.facebook.com/carromcompany
Follow us on Instragram at
www.instagram.com/thecarromcompany
www.carrom.com