Cartrend TY255 User manual

I n s t a l l a t i o n
I n s t r u c t i o n s
2 1 2 1 S o u t h A n n e S t r e e t
S a n t a A n a , C A 9 2 7 0 4
800- 8 4 6 - 8621
F o r G e n e r a l I n f o r m a t i o n
o r W a r r a n t y c o n t a c t :
s u p p o r t @ c a l t r e n d . c o m
Part# TY255
Row: Front Buckets
Application Available for: Toyota Sequoia Limited
2008-2016
Parts included:
Backrests-2 Headrest-2
Bottom Cushion-2

Part# TY255- Front Buckets
Step #1- Prepare Seats
Remove headrest from mounts and set
them aside.
Step #2-Install Backrest
Sep #3- Install Backrest
Step#4- Install Cushion
Step#5- Install Cushion
Step#6-Install Headrest
Step#7- Finishing Touch
**Enjoy your CalTrend Seat
Covers***
***In case of dirty or stained
covers hand wash with mild
detergent and air dry. NEVER
MACHINE WASH OR DRY. The
material may come apart
from lamination or foaming.
This will also void any
warranty.***
Place the cover
over the backrest,
matching its
contours and
cutouts. Tuck in the
bottom piece of the
cover, sending the
velcro to the back.
Also tuck in the flap
located on the side
of the backrest.
Place the cover
onto the cushion,
matching its
contours, and
cutouts. Then tuck
in the top piece of
the cover, sending
the buckles to the
back. Also attach
the velcro onto the
carpet.
Place the cover over the headrest,
matching its contours, and cutouts.
Make sure to place the solid piece of the
cover to the front. Secure the fit with
the velcro.
Once all covers
have been
installed adjust
the seating and
headrests to their
regular position.
Tuck all straps
underneath the
seating. Now you
are ready to enjoy
your CalTrend
Seat Covers 
Pull the velcro through
the back and secure
the fit by attaching the
velcros together. On
the driver backrest
pull the hooks through
the back, and hook
them under the seat,
then grab the second
hooks and hook them
under the seat as well.
Buckle the
straps
accordingly,
make sure to
pull on the
straps tightly,
so that the
cover is well
fitted.