Case CX300C User manual

1/2
CX300C
Crawler Excavator
SERVICE MANUAL
CX300C
Crawler Excavator
Part nu mber 47877016
English
July 2015
© 2015 CNH Industrial Italia S.p.A. All Rights Reserved.
Part number 47877016
SERVICE MANUAL

SERVICEMANUAL
CX300CCrawlerexcavatorSTDversion(TIER3)-CHINAMarket
4787701601/07/2015
EN

Contents
INTRODUCTION
Engine.......................................................................................10
[10.001]Engineandcrankcase.............................................................10.1
[10.102]Panandcovers....................................................................10.2
[10.106]Valvedriveandgears..............................................................10.3
[10.101]Cylinderheads.....................................................................10.4
[10.105]Connectingrodsandpistons.......................................................10.5
[10.103]Crankshaftandywheel............................................................10.6
[10.216]Fueltanks..........................................................................10.7
[10.206]Fuellters..........................................................................10.8
[10.218]Fuelinjectionsystem...............................................................10.9
[10.250]Turbochargerandlines...........................................................10.10
[10.254]Intakeandexhaustmanifoldsandmufer.......................................10.11
[10.501]ExhaustGasRecirculation(EGR)-DieselParticulateFilter(DPF)exhaust
treatment..................................................................................10.12
[10.400]Enginecoolingsystem...........................................................10.13
[10.414]Fananddrive....................................................................10.14
[10.310]Aftercooler........................................................................10.15
[10.304]Enginelubricationsystem........................................................10.16
Hydraulicsystems.......................................................................35
[35.000]Hydraulicsystems..................................................................35.1
[35.300]Reservoir,cooler,andlters........................................................35.2
[35.106]Variabledisplacementpump.......................................................35.3
[35.102]Pumpcontrolvalves................................................................35.4
[35.304]Combinationpumpunits...........................................................35.5
[35.359]Maincontrolvalve..................................................................35.6
[35.357]Pilotsystem........................................................................35.7
4787701601/07/2015

[35.355]Hydraulichandcontrol.............................................................35.8
[35.356]Hydraulicfootcontrol...............................................................35.9
[35.352]Hydraulicswingsystem..........................................................35.10
[35.353]Hydraulictravelsystem..........................................................35.11
[35.354]Hydrauliccentraljoint............................................................35.12
[35.736]Boomhydraulicsystem..........................................................35.13
[35.737]Dipperhydraulicsystem..........................................................35.14
[35.738]Excavatorandbackhoebuckethydraulicsystem................................35.15
[35.360]Hammerandrotatingbuckethydraulicsystem..................................35.16
Framesandballasting.................................................................39
[39.140]Ballastsandsupports..............................................................39.1
Tracksandtracksuspension........................................................48
[48.130]Trackframeanddrivingwheels....................................................48.1
[48.100]Tracks..............................................................................48.2
[48.134]Tracktensionunits.................................................................48.3
[48.138]Trackrollers........................................................................48.4
Cabclimatecontrol.....................................................................50
[50.100]Heating.............................................................................50.1
[50.200]Airconditioning.....................................................................50.2
Electricalsystems.......................................................................55
[55.000]Electricalsystem...................................................................55.1
[55.100]Harnessesandconnectors.........................................................55.2
[55.525]Cabenginecontrols................................................................55.3
[55.015]Enginecontrolsystem..............................................................55.4
[55.201]Enginestartingsystem.............................................................55.5
[55.301]Alternator...........................................................................55.6
[55.302]Battery..............................................................................55.7
[55.202]Coldstartaid.......................................................................55.8
4787701601/07/2015

Thanks very much for your reading,
Want to get more information,
Please click here, Then get the complete
manual
NOTE:
If there is no response to click on the link above,
please download the PDF document first, and then
click on it.
Have any questions please write to me:
[e-mail]

[55.010]Fuelinjectionsystem...............................................................55.9
[55.014]Engineintakeandexhaustsystem...............................................55.10
[55.989]ExhaustGasRecirculation(EGR)electricalsystem.............................55.11
[55.012]Enginecoolingsystem...........................................................55.12
[55.013]Engineoilsystem................................................................55.13
[55.640]Electronicmodules...............................................................55.14
[55.512]Cabcontrols......................................................................55.15
[55.036]Hydraulicsystemcontrol.........................................................55.16
[55.524]Cabcontrols(Liftarm,Boom,Dipper,Bucket)...................................55.17
[55.408]Warningindicators,alarms,andinstruments....................................55.18
[55.DTC]FAULTCODES..................................................................55.19
Booms,dippers,andbuckets.......................................................84
[84.910]Boom...............................................................................84.1
[84.912]Dipperarm.........................................................................84.2
[84.100]Bucket..............................................................................84.3
Platform,cab,bodywork,anddecals.............................................90
[90.150]Cab.................................................................................90.1
[90.156]Cabglazing........................................................................90.2
[90.120]Mechanically-adjustedoperatorseat...............................................90.3
[90.100]Enginehoodandpanels...........................................................90.4
4787701601/07/2015

INTRODUCTION
4787701601/07/2015
1

Contents
INTRODUCTION
Foreword-Importantnoticeregardingequipmentservicing....................................3
Safetyrules.....................................................................................4
Safetyrules–Generalinformation.............................................................5
Safetyrules–Personalsafety..................................................................6
Safetyrules–Cabprotectivestructure.........................................................8
Torque–Boltandnut...........................................................................9
Torque–Specialtorquesetting...............................................................10
Basicinstructions-Shopandassembly......................................................14
Generalspecication.........................................................................16
Generalspecication–Mainequipment......................................................20
Weight........................................................................................26
Dimension....................................................................................28
Conversionfactors............................................................................30
Consumables.................................................................................42
Capacities.....................................................................................45
Abbreviation..................................................................................46
Productidentication..........................................................................49
Productidentication-Machineorientation..................................................51
4787701601/07/2015
2

INTRODUCTION
Foreword-Importantnoticeregardingequipmentservicing
Allrepairandmaintenanceworklistedinthismanualmustbecarriedoutonlybyqualieddealershippersonnel,
strictlycomplyingwiththeinstructionsgiven,andusing,wheneverpossible,thespecialtools.
Anyonewhoperformsrepairandmaintenanceoperationswithoutcomplyingwiththeproceduresprovidedherein
shallberesponsibleforanysubsequentdamages.
Themanufacturerandalltheorganizationsofitsdistributionchain,including-withoutlimitation-national,regional,or
localdealers,rejectanyresponsibilityfordamagescausedbypartsand/orcomponentsnotapprovedbythemanu-
facturer,includingthoseusedfortheservicingorrepairoftheproductmanufacturedormarketedbythemanufacturer.
Inanycase,nowarrantyisgivenorattributedontheproductmanufacturedormarketedbythemanufacturerincase
ofdamagescausedbypartsand/orcomponentsnotapprovedbythemanufacturer.
Themanufacturerreservestherighttomakeimprovementsindesignandchangesinspecicationsatanytimewithout
noticeandwithoutincurringanyobligationtoinstallthemonunitspreviouslysold.Specications,descriptions,and
illustrativematerialhereinareasaccurateasknownattimeofpublicationbutaresubjecttochangewithoutnotice.
Incaseofquestions,refertoyourCASECONSTRUCTIONSalesandServiceNetworks.
4787701601/07/2015
3

INTRODUCTION
Safetyrules
Personalsafety
Thisisthesafetyalertsymbol.Itisusedtoalertyoutopotentialpersonalinjuryhazards.Obeyall
safetymessagesthatfollowthissymboltoavoidpossibledeathorinjury.
ThroughoutthismanualyouwillndthesignalwordsDANGER,WARNING,andCAUTIONfollowedbyspecialin-
structions.Theseprecautionsareintendedforthepersonalsafetyofyouandthoseworkingwithyou.
Readandunderstandallthesafetymessagesinthismanualbeforeyouoperateorservicethemachine.
DANGERindicatesahazardoussituationthat,ifnotavoided,willresultindeathorseriousinjury.
WARNINGindicatesahazardoussituationthat,ifnotavoided,couldresultindeathorseriousinjury.
CAUTIONindicatesahazardoussituationthat,ifnotavoided,couldresultinminorormoderateinjury.
FAILURETOFOLLOWDANGER,WARNING,ANDCAUTIONMESSAGESCOULDRESULT
INDEATHORSERIOUSINJURY .
Machinesafety
NOTICE:Noticeindicatesasituationthat,ifnotavoided,couldresultinmachineorpropertydamage.
ThroughoutthismanualyouwillndthesignalwordNoticefollowedbyspecialinstructionstopreventmachineor
propertydamage.ThewordNoticeisusedtoaddresspracticesnotrelatedtopersonalsafety.
Information
NOTE:Noteindicatesadditionalinformationthatclariessteps,procedures,orotherinformationinthismanual.
ThroughoutthismanualyouwillndthewordNotefollowedbyadditionalinformationaboutastep,procedure,or
otherinformationinthemanual.ThewordNoteisnotintendedtoaddresspersonalsafetyorpropertydamage.
4787701601/07/2015
4

INTRODUCTION
Safetyrules–Generalinformation
Cleaning
Cleanthemetalpartswithcleaningsolutionthatmeetsthestandardandsteamcleaning.(exceptforbearings)
Aftercleaning,drywell,andinjectoilinallparts.
Alsoinjectoilintothebearingsafterdrying.
Inspection
Whendisassemblingparts,checkalltheparts.
Ifthereareanywornordamagedparts,replacethem.
Inspectcarefullytopreventinitialbreakdowns.
Bearing
Replaceanyloosebearings.
Airdrybearingsbeforeinstallingthem.
Needlebearing
Wheninsertingneedlebearings,beverycarefulnottodamagethem.
Applygreasetothesectionwheretheneedlebearingwillbeinserted.
Gear
Checkthatthereisnowearandnodamage.
Oilseal,O-ring,gasket
Alwaysinstallnewoilseals,O-rings,andgaskets.
ApplygreasetosectionswhereoilsealsandO-ringswillbeinserted.
Shaft
Checkthatthereisnowearandnodamage.
Checkthebearingsandcheckfordamagedoilsealsontheshaft.
Serviceparts
InstallCASECONSTRUCTIONgenuineserviceparts.
Whenplacinganorder,checkthepartscatalog.ItcontainstheCASECONSTRUCTIONgenuinepartnumbers.
Anybreakdownsarisingfromtheinstallationofnon-genuinepartsarenotcoveredbythewarranty.
Lubricants(fuel,hydraulicoil)
Usetheoilfromthespeciedcompanyorspeciedintheoperator'smanualorserviceManual.
Anybreakdownsarisingfromanyfuelorhydraulicoilotherthanthosespeciedarenotcoveredbythewarranty.
4787701601/07/2015
5

INTRODUCTION
Safetyrules–Personalsafety
WARNING:
Thissymbolindicatesaprecaution.
Itgivesinformationconcerningthesafetyoftheoperatorandthoseinthesurroundings.
Readandunderstandtheseprecautionsthoroughlybeforeperformingthework.
Alwayscomplywithwarningsandprecautionssoastoavoidanyaccidents.
Thissectioncoversinformationrelatedtooverallsafety.
Checkwhetherallwarninglabelsareinplace.
AdditionallabelscanbeorderedfromServiceParts.
WARNING:
Readtheoperator'smanualtogainathoroughunderstandingofmachinecontroloperations.
WARNING:
Performanymachineoperationsfromtheseatingposition.
Anyothermethodmaycausesevereinjuries.
WARNING:
Onlytheoneoperatoristorideonthemachine.Nooneelseistorideonit.
WARNING:
Checkthesafetymessagesintheoperator'smanualbeforestartingtheengine.
Checkallthewarninglabelsonthemachine.
Checkthatnooneiswithinthemachine’soperatingrange.
Checktheoperatingmethodsinasafelocationbeforestartingtheactualwork.
Understandthemachineoperationswell,thenoperateincompliancewithallservice-relatedlawsandregulations.
Theoperator'smanualcanbepurchasedatyourCASECONSTRUCTIONdealer.
WARNING:
Workingwithsloppyclothesorclotheswithwhichsafetycannotbeensuredleadstodamagetothemachine
andinjurytotheoperator.
Alwayswearclothesthatensuressafety.
Inordertoworkmoresafely,itisrecommendedtowearadditionalsafetyequipment.
Helmet,safetyshoes,earprotection,goggles,workclothes,andgloves
WARNING:
Paycarefulattentionwhenworkingwiththeenginerunning.
WARNING:
Checkhydraulicequipment.
Workaccordingtotheprocedure.
Donotchangetheprocedure.
4787701601/07/2015
6

INTRODUCTION
WARNING:
Checkthatthereisnooneinthesurroundingsbeforedrainingthepressurefromhydrauliccircuitsduring
machinehydrauliccylinderinspection.
WARNING:
Usegloveswhenhandlinghigh-temperatureparts.
WARNING:
Bringthelowerpartsorattachmentsincontactwiththegroundbeforeinspectingorrepairingthem.
WARNING:
Checkthathosesandtubesaresecurelyconnected.
Ifthereisanydamagetoahoseortube,replaceit.
Donotcheckforoilleaksbyhand.Usecardboardorwood.
WARNING:
Whenremovinganattachmentpinorotherhardenedpin,useahammerthathasasofthead.
WARNING:
Weareyeprotectionwhenusingahammertoinstallapinorwhenworkingwithagrinder.
Atthistime,usegogglesoreyeprotectorsthatmeetstandards.
WARNING:
Parkthemachineinasafelocationwhenrepairingorinspectingit.
WARNING:
Useworksiteprotectionwhenrepairingthemachine.
Checktheoil,coolant,grease,andtools.
Recovermaterialsandpartsasnecessary.
Payenoughattentiontosafety.
WARNING:
Someofthemachine'spartsareextremelyheavy.
Useanappropriateliftingequipmentforsuchparts.
Forweightsandprocedures,seetheServiceManual.
WARNING:
Exhaustgasesaretoxic.
Alwaysprovidegoodventilationwhenworkingindoorsorinanyotherenclosedspace.
WARNING:
Iftheelectrolyticbatterysolutionfreezes,itmayexplode.
4787701601/07/2015
7

INTRODUCTION
Safetyrules–Cabprotectivestructure
Cabprotectivestructure
Modifyingthecabmaincomponentsisprohibitedinordertoprotecttheoperator.
Prohibiteditems
•Modicationsthatreducethestrengthofaplatformthathasacabwithaprotectivestructuremountedonit.(Actions
ormodicationsthatreducethefunctionalityoftheanchoringpartattheleft-rearofthecab)
•Modicationsthateffectthestrengthofthecabwithaprotectivestructure.
Modicationsprohibited(redpart)Allmodications(grinding,welding,drillingholes,removing,etc.)
areprohibited.
Modicationspermittedunderconditions(gray
part)
Removalofpartsisprohibited.Barweldingandmakingholes(up
todiameter20mm(0.787in))bydrillingarepossible.
(CX130C/CX210C/CX220C/CX260C/CX300C/CX350C/CX380C)
SMPH15CEX6544FA1
4787701601/07/2015
8

INTRODUCTION
Torque–Boltandnut
•Tightenalternatingbetweenleftandrightandtopandbottomsothatuniformtighteningforceisapplied.
LPIL12CX00005EA1
•IfLOCTITE®wasusedonaremovedbolt(thereissomethingwhitestickingtotheboltwhenitisremoved),cleanthe
oldLOCTITE®offwithcleaninguid,drythebolt,thenapply2-3dropsofLOCTITE®tothethreadsectionofthebolt.
Torquetable
Boltnominal
diameter(size)M6M8M10M12M14M16M18M20
Wrench10mm13mm17mm19mm22mm24mm27mm30mm
Hexagon
boltTighten-
ingtorque
6.9N·m
(5.089lb
ft)
19.6N·m
(14.456lb
ft)
39.2N·m
(28.912lb
ft)
58.8N·m
(43.369lb
ft)
98.1N·m
(72.355lb
ft)
156.9N·
m(115.72
3lbft)
196.1N·
m(144.63
6lbft)
294.2N·
m(216.99
1lbft)
Wrench5mm6mm8mm10mm12mm14mm14mm17mm
Hexagon
socket
headbolt
Tighten-
ingtorque
8.8N·m
(6.491lb
ft)
21.6N·m
(15.931lb
ft)
42.1N·m
(31.051lb
ft)
78.5N·m
(57.899lb
ft)
117.7N·m
(86.811lb
ft)
176.5N·
m(130.18
0lbft)
245.2N·
m(180.85
0lbft)
343.2N·
m(253.13
1lbft)
4787701601/07/2015
9

INTRODUCTION
Torque–Specialtorquesetting
CodeRetighteninglocationNominalbolt
diameterWrenchTighteningtorque
1*TravelmotorM2436mm900-1051N·m(664-775lbft)
2*DrivesprocketM2030mm521-608N·m(384.27-448.44lbft)
3*Take-uprollerM1624mm267-312N·m(196.93-230.12lbft)
4*UpperrollerM2030mm521-608N·m(384.27-448.44lbft)
5*LowerrollerM2436mm902-1049N·m(665.28-773.70lbft)
6*TrackguardM2436mm902-1049N·m(665.28-773.70lbft)
7ShoeM2432mm1236-1510N·m(911.63-1113.72lbft)
8CounterweightM3350mm1862-2058N·m(1373.34-1517.90lbft)
9*TurntablebearingM2436mm784-914N·m(578.35-674.25lbft)
10*SwingunitM2436mm784-914N·m(578.35-674.25lbft)
11*MountM2030mm289-337N·m(213-249lbft)
12*FrontbracketM1017mm63.8-73.6N·m(47-54lbft)
13*
Engine
RearbracketM1219mm109-127N·m(80-94lbft)
14*RadiatorM1624mm147.2-176.6N·m(109-130lbft)
15*FlangeM1017mm63.8-73.6N·m(47-54lbft)
16*
Hydraulic
pumpPumpM20
17mm
hexagon
socket
head
367-496N·m(270.69-365.83lbft)
17*HydraulictankM1624mm233-276N·m(172-204lbft)
18*FueltankM1624mm233-276N·m(172-204lbft)
19*ControlvalveM1624mm267-312N·m(196.93-230.12lbft)
20*LockbarM1624mm267-312N·m(196.93-230.12lbft)
21*CenterjointJointM1219mm109-127N·m(80.39-93.67lbft)
22CabM1624mm149-173N·m(109.90-127.60lbft)
23BatteryM1017mm19.6-29.4N·m(14.459-21.688lbft)
CAUTION:
•Foritemsmarkedwith*,alwaysapplyLOCTITE®262™ortheequivalentandtightentothespeciedtorque.
•Thetighteningtorqueinkgf·misdeterminedwithN·m÷9.8(lbf·ft.÷7.2).
Tightentheboltsandnutsforwhichthevaluesarenotspeciedinthetableaboveasfollows.
Nominalboltdiameter(Size)M6M8M10M12M14M16M18M20
Wrench10mm13mm17mm19mm22mm24mm27mm30mm
HexagonboltTightening
torque6.9N·m19.6N·
m
39.2N·
m
58.8N·
m
98.1N·
m
156.9N·
m
196.1
N·m
294.2N·
m
Wrench5mm6mm8mm10mm12mm14mm14mm17mm
Hexagonsocket
headboltTightening
torque8.8N·m21.6N·
m
42.1N·
m
78.5N·
m
117.7N·
m
176.5N·
m
245.2
N·m
343.2N·
m
4787701601/07/2015
10

INTRODUCTION
SMIL14CEX2929HB1
4787701601/07/2015
11

INTRODUCTION
SMIL15CEX3370HB2
4787701601/07/2015
12

INTRODUCTION
SMIL15CEX3371GB3
4787701601/07/2015
13

INTRODUCTION
Basicinstructions-Shopandassembly
Shimming
Foreachadjustmentoperation,selectadjustingshimsandmeasuretheadjustingshimsindividuallyusingamicrom-
eter,thenadduptherecordedvalues.Donotrelyonmeasuringtheentireshimmingset,whichmaybeincorrect,or
theratedvalueshownoneachshim.
Rotatingshaftseals
Forcorrectrotatingshaftsealinstallation,proceedasfollows:
1.Beforeassembly,allowthesealtosoakintheoilitwillbesealingforatleastthirtyminutes.
2.Thoroughlycleantheshaftandcheckthattheworkingsurfaceontheshaftisnotdamaged.
3.Positionthesealinglipfacingtheuid.
NOTE:Withhydrodynamiclips,takeintoconsiderationtheshaftrotationdirectionandpositionthegroovessothat
theywillmovetheuidtowardstheinnersideoftheseal.
4.Coatthesealinglipwithathinlayeroflubricant(useoilratherthangrease).Fillthegapbetweenthesealinglip
andthedustlipondoublelipsealswithgrease.
5.Insertthesealinitsseatandpressdownusingaatpunchorsealinstallationtool.Donottapthesealwitha
hammerormallet.
6.Whileyouinserttheseal,checkthatthesealisperpendiculartotheseat.Whenthesealsettles,makesurethat
thesealmakescontactwiththethrustelement,ifrequired.
7.Topreventdamagetotheseallipontheshaft,positionaprotectiveguardduringinstallationoperations.
O-ringseals
LubricatetheO-ringsealsbeforeyouinsertthemintheseats.ThiswillpreventtheO-ringsealsfromoverturningand
twisting,whichwouldjeopardizesealingefciency.
Sealingcompounds
Applyasealingcompoundonthematingsurfaceswhenspeciedbytheprocedure.Beforeyouapplythesealing
compound,preparethesurfacesasdirectedbytheproductcontainer.
Spareparts
OnlyuseCNHOriginalPartsorCASECONSTRUCTIONOriginalParts.
Onlygenuinesparepartsguaranteethesamequality,duration,andsafetyasoriginalparts,astheyarethesame
partsthatareassembledduringstandardproduction.OnlyCNHOriginalPartsorCASECONSTRUCTIONOriginal
Partscanofferthisguarantee.
Whenorderingspareparts,alwaysprovidethefollowinginformation:
•Machinemodel(commercialname)andProductIdenticationNumber(PIN)
•Partnumberoftheorderedpart,whichcanbefoundinthepartscatalog
4787701601/07/2015
14