Case WX145 User manual

Printed in Italy
WX145, WX165, WX185
Printed in Italy *Tier III*
Operator’s Manual
87590052 EN

CASE
WX 145
WX 165
WX 185
OPERATOR’S MANUAL
87590052 EN * Tier III *

SUMMARY OF SECTIONS
1 - INTRODUCTION, SAFETY, PLATES AND DECALS
2 - CONTROLS AND INSTRUMENTS
3 - OPERATING THE MACHINE
4 - SUPPLIES AND SERVICE CHART
5 - TROUBLESHOOTING
6-STORAGE
7 - ACCESSORIES
8 - DATA AND TECHNICAL SPECIFICATIONS
9 - ALPHABETICAL INDEX

SAFETY INSTRUCTION
This warning symbol points out important
messages involving your safety.
Carefully read the safety rules contained herein
and follow advised precautions to avoid potential
hazards and to safeguard your safety and personal
integrity.
In this manual you will find this symbol together
with the following key-words:
The non compliance with the warning preceded by
the above mentioned key-words (WARNING and
DANGER) can cause serious accidents or even the
death of the persons involved.
Moreover in the present Manual have been given
some instructions with texts in italics, preceded by
the words NOTE and CAUTION:
NOTE: it emphasizes and underlines to the
operator the correct technique or correct procedure
to follow.
SWARNING S
This symbol warns about the possibility of potential
damages to the machine that can involve the
operator’s safety.
SDANGER S
With specific warnings about potential dangers for
the operator’s or other persons integrity directly or
indirectly involved.
S
SCAUTION S
It warns the operator of a possible hazard of
machine damage in case he does not follow a
determined procedure.