Casio SE-S3000 User manual

Dealer’s Manual
(for SE-S400, SE-S3000, SE-C450, SE-C3500:Ver1.0)
Initialization (for SE-S400/SE-S3000)...................................................................3
Initializing the cash register.......................................................................................... 3
Automatic initialization ............................................................................................. 3
Manual initialization ................................................................................................. 3
Initialization (for SE-C450/SE-C3500) ..................................................................4
Initializing the cash register.......................................................................................... 4
Automatic initialization ............................................................................................. 4
Manual initialization ................................................................................................. 4
Initialization............................................................................................................5
Clearing a machine lock up.......................................................................................... 5
For SE-S400/SE-S3000 ............................................................................................................... 5
For SE-C450/SE-C3500............................................................................................................... 5
Scanning PLU ........................................................................................................6
Summary ................................................................................................................. 6
Preparation ............................................................................................................. 6
Registration.............................................................................................................. 7
Not found PLU .............................................................................................................................. 7
Unreadable barcode ..................................................................................................................... 8
Programming ........................................................................................................... 8
To allocate <OBR> key ................................................................................................................. 8
To modify unit price and linked department/add new scanning PLU item.................................... 8
Report...................................................................................................................... 9
To issue individual scanning PLU item report............................................................................... 9
To issue individual scanning PLU item report............................................................................... 9
To reset all scanning PLU item sales data.................................................................................... 9
Advanced operation for scanning PLU .................................................................. 10
To issue inactive scanning PLU report ....................................................................................... 10
About sales data storage in an SD card............................................................ 11
CSV le format of the sales data ............................................................................12
Parameter Sheet ..................................................................................................13
Key allocation (Program 4)..........................................................................................13
Key function/machine feature (Program 3) ..................................................................17
Character (Program 2) ............................................................................................... 52
Unit price/rate (Program 1)......................................................................................... 61
Program reading (Program 6) .................................................................................... 65
Appendix ..............................................................................................................73
CASIO COMPUTER CO., LTD.
6-2, Hon-machi 1-chome
Shibuya-ku, Tokyo 151-8543, Japan
MA1307-C
291DEALER_1307EU_ID

2
X
REG
OFF
RF
PGM
Z
X2/Z2
12
Caution !
Before connecting peripheral devices to the COM port,
turn the mode switch to the “OFF” position (step 1)
and disconnect the power plug from AC outlet (step 2).

3
Initialization (for SE-S400/SE-S3000)
Initializing the cash register
Automatic initialization
Use the following procedure to initialize the cash register before using it for the rst time after you purchase it.
1. Install the two memory backup batteries.
2. Plug the cash register into a wall outlet.
3. Read the printouts and follow the procedure printed on the chit. Select the country and language from
the list then press a key. If you want to skip this step, just press s key.
4. Follow the procedure on the display to set the date and time.
• At this time, “00000000” appears on the display and the printer operates for a minute. Initialization is
complete when the printer stops operating.
CAUTION!
Automatic initialization (which clears all sales and programming data stored in the register's memory)
is performed whenever all power (both the backup batteries and power through power cord) is cut
from the cash register and then restored. The program data stored in the ash memory is restored.
Remember…
Main power cut by:
• Unplugging the cash register
• Power failure
Backup power cut off by:
• Removing the batteries
• Dead or low batteries
Automatic initialization when the
main power is restored and the
mode switch is set to any position
besides OFF.
+ =
Manual initialization
Use the following procedure to initialize the cash register and clear all transaction data and program data
from its memory.
1. Insert the mode key marked “PGM” into the mode switch.
2. Turn the mode switch to the OFF position.
3. While holding down the f(SE-S400) j(SE-S3000) key, turn the mode switch to the PGM position.
4. Release the f(SE-S400) j(SE-S3000) key.
5. Enter A B C D E and press the s key. (A, B, C, D: Refer to the section below.)
A. Language selection This specication denes the language
to use in receipt/journal printing.
English 20
Dutch 23
Danish 26
Portuguese 29
French 21
German 24
Norwegian 27
Spanish 22
Swedish 25
Finnish 28
B. Area/monetary mode This specication denes the area and
the decimal position.
German 24
Two decimal place 21
No decimal place 23
C. Department number This specication denes the number of
department keys.
SE-S400 225
SE-S3000 230
D. Program 4 mode This specication denes Program 4
mode availability.
w/o PGM4 20
with PGM4
24
E. Number of PLU This specication denes number of
PLUs.
PLU 3000/Scanning PLU 2000 20
PLU 2000/Scanning PLU 3000 22
(SE-S400 only)

4
Initialization (for SE-C450/SE-C3500)
Initializing the cash register
Automatic initialization
Use the following procedure to initialize the cash register before using it for the rst time after you purchase it.
1. Install the two memory backup batteries.
2. Plug the cash register into a wall outlet.
3. Read the printouts and follow the procedure printed on the chit. Select the country and language from
the list then press a key. If you want to skip this step, just press s key.
4. Follow the procedure on the display to set the date and time.
• At this time, “00000000” appears on the display and the printer operates for a minute. Initialization is
complete when the printer stops operating.
CAUTION!
Automatic initialization (which clears all sales and programming data stored in the register's memory)
is performed whenever all power (both the backup batteries and power through power cord) is cut
from the cash register and then restored. The program data stored in the ash memory is restored.
Remember…
Main power cut by:
• Unplugging the cash register
• Power failure
Backup power cut off by:
• Removing the batteries
• Dead or low batteries
Automatic initialization when the
main power is restored and the
mode switch is set to any position
besides OFF.
+ =
Manual initialization
Use the following procedure to initialize the cash register and clear all transaction data and program data
from its memory.
1. Insert the mode key marked “PGM” into the mode switch.
2. Turn the mode switch to the OFF position.
3. While holding down the f(SE-C450) j(SE-C3500) key, turn the mode switch to the PGM position.
4. Release the f(SE-C450) j(SE-C3500) key.
5. Enter A B C D E and press the s key. (A, B, C, D: Refer to the section below.)
A. Language selection This specication denes the language
to use in receipt/journal printing.
English 20
Dutch 23
Danish 26
Portuguese 29
French 21
German 24
Norwegian 27
Spanish 22
Swedish 25
Finnish 28
B. Area/monetary mode This specication denes the area and
the decimal position.
German 24
Two decimal place 21
No decimal place 23
C. Touch keyboard This specication denes touch key-
board with department or at-PLU. Department keys are allocated 272
Flat PLU keys are allocated 200
D. System selection This specication denes the system
(Check tracking system or Non-check
tracking system)
Check tracking system
(SE-C450: Check No.=40, detail No.=1200)
(SE-C3500: Check No.=50, detail No.=1600) 22
Non-check tracking system 24
E. Number of PLU This specication denes number of
PLUs.
PLU 3000/Scanning PLU 2000 20
PLU 2000/Scanning PLU 3000 22
(SE-C450 only)

5
Initialization
Clearing a machine lock up
For SE-S400/SE-S3000
If you make a mistake in operation, the cash register may lock up to avoid damage to programs and preset
data. Should it happens, you can use the following procedure to clear the lock up without losing any data.
1. Power off the register.
2. Insert the PGM key in the mode switch.
3. Press down and hold f (SE-S400) f (SE-S3000), and turn the mode switch to PGM mode.
4. The display shows INIT (SE-S400)/FC (SE-S3000) on alpha-display, then release f (SE-S400) f
(SE-S3000).
5. Press s. A receipt is issued.
For SE-C450/SE-C3500
If you make a mistake in operation, the cash register may lock up to avoid damage to programs and preset
data. Should it happens, you can use the following procedure to clear the lock up without losing any data.
1. Power off the register.
2. Insert the PGM key in the mode switch.
3. Press down and hold f (SE-C450) f (SE-C3500), and turn the mode switch to PGM mode.
4. The display shows INIT (SE-C450)/FC (SE-C3500) on alpha-display, then release f (SE-C450) f
(SE-C3500).
5. Press s. A receipt is issued.

6
Scanning PLU
Summary
You can easily register items with barcode label by using barcode scanner.
Without programming any PLU code, unit price nor linked department, you can register the items and
create the PLU programming data automatically by not found PLU registration.
You can input the PLU code by scanning the code or enter the PLU code and press ® manually.
The barcode system of this register is as follows:
Scanning PLU code Input method Sample barcode
Scanner PLU code manual input
EAN-13 (PLU type) √13 digits with check digit
EAN-8 (PLU type) √8 digits with check digit
UPC-A (PLU type) √10/11 digits without check digit
UPC-E (PLU type) √6 digits without check digit
Preparation
Just connect the handheld scanner (option) with the register.
1. Power off the register, and disconnect the AC plug from AC outlet.
2. Remove the connector cover.
3. Connect the scanner to the register and tighten two screws of the connector.
COM2(+5V) COM1(+5V)
Connect here
4. Replace the connector cover, reconnect the AC plug and power on the register.

7
Scanning PLU
Registration
Not found PLU
Item
Barcode 123456
Unit price $1.00
Quantity 2
Department 1
Payment Cash $2.00
OPERATION DISPLAY
Scanning the barcode
Error message
1−!
Enter unit price of the item and press the ap-
propriate department.
Link department name
Scanning the same item
After this procedure, the item is automati-
cally programmed.
a
RECEIPT
— Scanned item
— Barcode*
— Barcode*
1 DEPT001 •1.00
#123456
1 DEPT001 •1.00
#123456
TL •2.00
CASH •2.00
* These items can be printed by program.
NOTE:
If there is no room for the not found item, this item is overwritten to the oldest item of the
scanning PLU le.
After this registration, linked department name is used for this item. If you want to change
the item name, refer to “To modify the scanning PLU item descriptor” section of this manual.
Mode Switch
REG

8
Unreadable barcode
In case of the scanner cannot read a barcode, enter the PLU code printed underneath the barcode and
press the ® key. It is necessary to enter a check digit if you register an EAN-13 or EAN-8 barcode.
Item 1*
EAN-8
Barcode 49123494
Unit price ($2.00)
Quantity 1
Department 1
Item 2*
UPC-E
Barcode 654321
Unit price ($3.00)
Quantity 1
Department 1
Payment Cash $10.00
*These items have been stored in the PLU
le already.
OPERATION RECEIPT
4912
3494
Enter barcode with check digit.
1 PLU0002 •2.00
#49123494
1 PLU0003 •3.00
#654321
TL •5.00
CASH •10.00
CG •5.00
(Press ®.) ®
654
321
Enter barcode without check digit.
(Press ®.) ®
s
10−a
Programming
In this dealer’s manual, part of operation is omitted. Please insert the following operations between the
steps.
Step Operation
1Turn the Mode switch to PGM position.
2By pressing >key continuously, select [System Setting] and press akey. >▪▪▪▪▪>a
3Now, the cash register is set in the program mode. Follow the steps described in
this manual.
For example, to modify unit price and linked department /add new scanning PLU item, operate as shown
below.
[Mode to PGM] >▪▪▪▪▪>(select “System Setting”) a1s0071s▪▪▪▪▪▪▪▪▪▪▪▪s
To allocate <OBR> key
Refer to the “Keyboard layout change” chapter of this manual (SE-S400/SE-S3000,SE-C450/SE-
C3500). (The function code of the <OBR> is “103”.)
To modify unit price and linked department/add new scanning PLU item
PGM
Select
“System Setting”
61s60071s6
6Scanning or barcode ®
6 : ~: 6a6: ~: 6a 6s
Appropriate department key
Dept memory No.
To another scanning PLU
Use original unit price
Unit price (max. 6-digit)
Scanning PLU

9
Report
To issue individual scanning PLU item report
Operation ________________________________ Report__________________________________
X INDIVIDUAL
DEPT001 38
8.13% •257.53
#49012349
PLU0001 17
0.53% •17.00
#123456
−−−−−−−−−−−−−−−−−−−−−−−
TL 88.61
•516.10
— Read symbol/report title
— Item name/No. of items
— Sales ratio*/amount
— PLU code *
— item name/No. of items
— Sales ratio */PLU amount
—PLU code *
— Total No. of items
— Total amount
* These items can be printed
by program.
Mode
Switch
X6®6s
barcode
Scanning
or
To another PLU
To issue individual scanning PLU item report
Operation ________________________________ Report__________________________________
6 26a 6
6
:~: 6 a 6
#6
:~: 6 a
Start department No.
Skip for first department No.
Skip for last department No.
End department No.
Z SCAN PLU 0001
0001026
DEPT001 .....001
PLU0001 109
8.13% •257.53
#49012349
PLU0001 17
0.53% •17.00
#123456
45
#893281391742
−−−−−−−−−−−−−−−−−−−−−−−
88.61
•516.10
DEPT002 .....002
PLU0101 150
#2395456 •312.34
−−−−−−−−−−−−−−−−−−−−−−−
123
•234.00
−−−−−−−−−−−−−−−−−−−−−−−
TL 123
•897.00
—
— Report code
— Link department/Dept No.
— Item name/No. of items
— Sales ratio*/amount
— PLU code*
— item name/No. of items
— Sales ratio*/PLU amount
— PLU code*
— Link dept total No. of items
— Link dept total amount
— Total No. of items
— Total amount
* These items can be printed
by program.
Mode
Switch
X/Z
Reset symbol/report title/reset
counter
To reset all scanning PLU item sales data
Operation ________________________________ Report__________________________________
6 50026 a 6
6 a (reset)
6 s (cancel)
Z SCAN PLU 0002
0050026
PLU Z clear Normal End
—
— Report code
— Result printing
Mode
Switch
ZReset symbol/report title/reset
counter
Scanning PLU

10
Advanced operation for scanning PLU
To issue inactive scanning PLU report
Operation ________________________________ Report__________________________________
6 90026a 6
6
:~:6a 6
6
:~:6a
Start department No.
Skip for first department No.
Skip for last department No.
End department No.
X NON ACTIVE
0090026
DEPT001 .....001
PLU0001 0
•0.00
#49012349
PLU0001 0
•0.00
#123456
0
#893281391742
−−−−−−−−−−−−−−−−−−−−−−−
0
•0.00
DEPT002 .....002
PLU0101 0
#2395456 •0.00
−−−−−−−−−−−−−−−−−−−−−−−
0
•0.00
−−−−−−−−−−−−−−−−−−−−−−−
TL 0
•0.00
— Read symbol/report title
— Report code
— Link department/Dept No.
— Item name/No. of items
— Amount
— PLU code*
— item name/No. of items
— PLU amount
— PLU code*
— Link dept total No. of items
— Link dept total amount
— Total No. of items
— Total amount
* These items can be printed
by program.
Mode
Switch
X
NOTE:
To issue inactive scanning PLU report, you need to set D1, D2, and D3 of Address code 31
(see page 30).
Scanning PLU

11
About sales data storage in an SD card
Storage timing of sales data
Sales report data will be stored in an SD card if D1 of Address code 17 is programmed as “Store sales
data and electronic journal data in SD” (see page 26) and sales report (X and Z reports) printing is
performed.
Totalizers to store sales data
The following les data are subject to be stored. Group range, department range, or ash report data will
not be stored.
001 Fixed adder
002 Free function
004 PLU
005 Department
006 Group
007 Clerk (011 Clerk details)
009 Hourly
010 Monthly
016 Scanning PLU
020 Grand total
Folder and le names of stored sales data
<Folder name>
\CASIO\SE3000\XZ\yyyy\mm\
yyyy: Year
mm: Month
<File name>
Xxxx_dda.CSV
X: Mode X or Z
xxx: 3-digit le number
dd: date
a: Identier for the same le name
The rst save of the day: none
The second save (in the same folder) of the day: A
The fourth save (in the same folder) of the day: B
~
The 27th save (in the same folder) of the day: Z
The 28th save (in the same folder) of the day: Error (SD CARD FULL error)
<Example>
File names of lump X report
Issuing lump X report on March 13, 2013.
↓
↓ The following les are created.
↓
\CASIO\SE3000\XZ2013\03\X001_13.CSV
X002_13.CSV
X005_13.CSV
X011_13.CSV
↓
Issuing lump X report on the same day.
↓
\CASIO\SE3000\XZ2013\03\X001_13A.CSV (with the extension “A”)
X002_13A.CSV (ditto)
X005_13A.CSV (ditto)
X011_13A.CSV (ditto)

12
CSV le format of the sales data
Sales data are stored in the CSV format as described below.
Number of elds vary by the type of the totalizer.
“MODEL ” , “ ”
“MACHINE ” , “MC#01 ”
“REPORT ” , “FIX ”
“FILE ” , “FILE001”
“MODE ” , “X ”
“Z COUNTER ” , “0000”
“DATE ” , “16-03-2013”
“TIME ” , “21:39”
“RECORD ” , “DESCRIPTOR ” , “QUANTITY/No ” , “AMOUNT ”
“0001” , “GROSS “ , “0” , “0.00”
“0002” , “NET “ , “0” , “0.00”
“0003” , “CAID “ , “0” , “0.00”
~ ~
Front part of totalizers’ data contain header information. The followings are the header characters.
“MODEL”, “MACHINE”, “REPORT”, “FILE”, “MODE”, “Z COUNTER”, “DATE”, “TIME”.
They can be changed by FILE023.
About headers
MODEL: Use special character data. Default; blank
MACHINE: Use character data on the system connection table.
R EPORT: Use corresponding record character of the X/Z report header le.
FILE: ECR’s internal le name.
MODE: Use from X, Z, XX1, ZZ1, and ZZ2.
Z COUNTER: Use the Z counter of corresponding report.
DATE: Prints data saving date in YYYYMMDD format.
TIME: Data saving time.
About title headers
Use the following titles to discriminate elds of totalizers.
01: “RECORD ”
02: “DESCRIPTOR ”
03: “QUANTITY/No ”
04: “QUANTITY ”
05: “No ”
06: “AMOUNT ”
09: “CUSTOMER ”
10: “GROSS AMOUNT ”
11: “NET No ”
12: “NET AMOUNT ”
13: “GROSS QUANTITY ”
17: “OBR CODE ”
18: “START TIME ”
19: “END TIME ”
About sales data storage in an SD card

13
Program 4
Parameter Sheet
Key allocation (Program 4)
Key allocation program
Programming procedure
Refer to page 8 to enter the program mode.
PGM
Select
“System Setting”
64s6
6
: ~: 6 ::: 6 6s
Function code
To other key
Set the same function
Appropriate key
(white key on the next page)
Record No.
(department/flat-PLU)
This step can be skipped
for transaction key.
PGM
Select
“System Setting”
64s6 ::: s6
6
: ~: 6 ::: 6 a 6s
Function code
To other key
Physical key code
(see the next page.)
Record No.
(department/flat-PLU)
This step can be skipped
for transaction key.

14
Key allocation programming (P4)
Conguration of the physical key layout
SE-S400/SE-S3000 (for US and Canada)
7 8 9
4 5 6
1 2 3
0
R-FEED
FEED
J-FEED
C
SUBTOTAL
082 076 073 070 067 060 053 046 039 032 025
088 081 075 072 069 066 059 052 045 038 031 024 018
087 080 065 058 051 044 037 030 023 015
086
079
064 057 050 043 036 029
085 078 063 056 049 042 035 028
084 011 012 062 055 048 041 034 027
013
Only for SE-S400 Only for SE-S3000
Only for SE-S3000
SE-S400/SE-S3000 (for Europe and other countries)
7 8 9
4 5 6
1 2 3
0
R-FEED
FEED
J-FEED
C
SUBTOTAL
082 076 073 070 067 060 053 046 039 032 025
088 081 075 072 069 066 059 052 045 038 031 024 018
087 065 058 051 044 037 030 023 015
086
079
064 057 050 043 036 029
085 078 063 056 049 042 035 028
084 011 012 062 055 048 041 034 027
013
Only for SE-S400 Only for SE-S3000
SE-C450/SE-C3500 (for US and Canada)
FEED
C
SUB
TO TA L
7 8 9
4 5 6
1 2 3
0
R-FEED J-FEED
049 057 065 073 081 089 097 105 113
048 056 064 072 080 088 096 104 112
047 055 063 071 079 087 095 103 111
046 054 062 070 078 086 094 102 110
045 053 061 069 077 085 093 101 109
044 052 060 068 076 084 092 100 108
043 051 059 067 075 083 091 099 107
042 050 058 066 074 082 090 098 106
039 036 033 026 021
040 038 035 032 025 020
037 034 031 024 019
030 023 018
029 022 015
028 017
011 012 027 013
Only for SE-C450
SE-C450/SE-C3500 (for Europe and other countries)
C
SUBTOTAL
7 8 9
4 5 6
1 2 3
0
FEED
R-FEED J-FEED
049 057 065 073 081 089 097 105 113
048 056 064 072 080 088 096 104 112
047 055 063 071 079 087 095 103 111
046 054 062 070 078 086 094 102 110
045 053 061 069 077 085 093 101 109
044 052 060 068 076 084 092 100 108
043 051 059 067 075 083 091 099 107
042 050 058 066 074 082 090 098 106
039 036 033 026 021
040 038 035 032 025 020
037 034 031 024 019
030 023 018
029 022 015
028
011 012 027 013
Only for SE-C450
The shadowed key cannot be programmed with any other functions.
<00>, <000>, and <.> functions are only allocated to <#011> or <#012> keys.

15
Program 4
Parameter Sheet
Function code list
Function Code Initial character
Add check
Age verication
Arrangement
Cancel
Cash amount tendered
Charge
Check tender
Clerk number
Coupon
Credit
Currency exchange
Customer number
Date/Time
Decimal point
Department
Dept No./Dept shift
Discount
Error correct (cancel)
Flat PLU *
Help
Lock out unused key
Manual tax
Menu shift
Merchandise subtotal
Minus
Multiplication/Date/Time
New balance
New check
ADD CHK
AGE
ARG
CANCEL
CASH
CHARGE
CHECK
CLK#
COUPON
CREDIT
CE
CT
DATE/TIME
.
DEPTnnn
SHIFT/No
%−–
CORR
PLUnnnn
HELP
TAX
MENU
MDST
−
X
NB
NEW CHK
Function Code Initial character
New/old check
No sale
Non-add
Non-add/No sale
OBR
Old check
Open
Open check
Paid out
Plus (addition)
PLU
Premium
Price
Quantity/for
Receipt
Receipt on/off
Received on account
Refund
Sign off
Subtotal
Tax program
Tax status shift
Text recall
Three zero
Tip
Two zero
VAT
NEW/OLD
NS
#
#/NS
OBR
OLD CHK
OPEN
OPEN CHK
PO
+
PLU#
%+
PRC
QT
RCT
RCT ON/OFF
RA
RF
SIGN−OFF
SUBTOTAL
TAX PGM
T/S
CHAR
000
TIP
00
VAT
093
042
040
041
103
092
067
117
021
029
048
030
049
083
038
076
020
033
150
075
151
057
010
097
015
096
046
* This function cannot be allocated on SE-S400/SE-S3000.
<00>, <000>, and <.> functions are only allocated to <#011> or <#012> keys.

16
Key allocation programming (P4)
Issuing program reading report of program 4 mode
Issuing procedure
Refer to page 8 to enter the program mode.
PGM
Select
“System Setting”
64s6s
Report sample
P 04 ....................
1−−−−−−−−−−−−−−−−−−−−−−−−−−
00 0015−02
011−096
. 0009−02
012−098
CASH 0004−02
013−001
— Program read symbol
— Function character/rec-#/le-#
— Hard key code/function code

17
Program 3
Parameter Sheet
Key function/machine feature (Program 3)
General control program
Programming procedure
Refer to page 8 to enter the program mode.
PGM
Select
“System Setting”
63s6 :: 22s6 ::~:: a 6s
Address code (2 digits) Program data (Max. 10 digits)
Program data (by address code)
Address code 01 (date order)
Description Choice Program code Initial value
Day order:
Year/Month/Day = 0, 1 Day/Month/Year = 2, Month/Day/Year = 3
Signicant number
(0~3) :
D10
Dependent upon
initialization code
Monetary mode:
0= 0, ~0 = 1, ~00 = 2, ~000 = 3
Signicant number
(0~3) :
D9
Dependent upon
initialization code
Always “0000” ;;;;
D8 D7 D6 D5
;;;;
D8 D7 D6 D5
Always “0000” ;;;;
D4 D3 D2 D1
;;;;
D4 D3 D2 D1
Address code 02 (store/machine No.)
Description Choice Program code Initial value
Store/machine No. Signicant numbers ::::
D4 D3 D2 D1
;;;;
D4 D3 D2 D1
Address code 03 (consecutive number)
Description Choice Program code Initial value
Reset consecutive number after daily reset report is issued. Yes = 0
No = 1 :
D8
;
D8
Always “0” ;
D7
;
D7
Consecutive number preset value. (It starts “preset value + 1”) ::::::
D6 D5 D4 D3 D2 D1
;;;;;;
D6 D5 D4 D3 D2 D1

18
Key function/machine feature (P3)
Address code 04 (tax system, rounding, etc.)
Description Choice Program code Initial value
Apply rounding for registration:
No rounding = 0, IF1 = 1, IF2 = 2, Danish = 3, Norwegian = 4,
Singaporean = 5, Finnish = 6, Australian, Canadian = 7, South
African = 8, Other roundings = 9 (Refer to D1)
Signicant number
(0~9) :
D10
;
D10
Tax system:
Single tax system = 0, U.S. tax system = 1, Canadian tax system = 2,
Singaporean tax system = 3
Signicant number
(0~3) :
D9
; Or A
(Other area (U.S.) than U.S.) D9
Always “000” ;;;
D8 D7 D6
;;;
D8 D7 D6
Always “000” ;;;
D5 D4 D3
;;;
D5 D4 D3
Print invoice number on receipt. No = 0
Yes =1 :
D2
;
D2
Other roundings:
New Zealander (A) = 0, New Zealander (B) = 1, Malaysian = 2,
Czech = 3 (D10 must be set to “9”.)
Signicant number
(0~3) :
D1
;
D1
Rounding
IF 1 rounding Finnish rounding
Last 1 digit of subtotal Result Last 1 digit of subtotal/cash change Result
0~2 0 0~2 0
3~7 5 3~7 5
8~9 10 8~9 10
IF 2 rounding South African rounding
Last 1 digit of subtotal Result Last 1 digit of subtotal Result
0~4 0 0~4 0
5~9 10 5~9 5
Singaporean rounding New Zealander (A/B) rounding
Last 1 digit of item, %+, %- registration Result Last 1 digit of subtotal/cash change Result
0~2 0 A0~4 0
3~7 5 5~9 10
8~9 10 B0~5 0
6~9 10
Danish rounding Malaysian rounding
Last 2 digits of subtotal Result Last 1 digit of subtotal/cash change Result
00~24 00 0~2 0
25~74 50 3~7 5
75~99 100 8~9 10
Australian rounding Canadian rounding
Last 1 digit rounding
(only for cash transactions) Result Last 1 digit rounding (only for cash transactions) Result
0~2 0 0~2 0
3~7 5 3~7 5
8~9 10 8~9 10
Norwegian rounding Czech rounding
Last 2 digits of subtotal Result Last 2 digits of subtotal Result
0~24 0 00~49 00
25~74 50 50~99 100
75~99 100

19
Program 3
Parameter Sheet
Address code 05 (print control for receipt)
Description Choice Program code Initial value
Print total line during nalization. aYes = 0
No = 1 :
(a+b)
D10
;
(a+b)
D10
Time system:
1 24 hour system, 2 12 hour system b1= 0
2= 2
Buffered receipt print *1 No = 0
Yes = 2 :
D9
;
D9
Skip item lines on journal (Journal skip) aNo = 0
Yes = 1 :
(a+b)
D8
;
(a+b)
D8
Breakdown set menu printing on receipt, post receipt, guest receipt. b No = 0
Yes = 4
Print receipt or journal.
(This program is effective only SE-S400, and SE-C450)
Receipt = 0
Journal = 1 :
D7
;
D7
Always “00” ;;
D6 D5
;;
D6 D5
Print number of item sold. aNo = 0
Yes = 1 :
(a+b)
D4
;
(U.S.)
S
(Others)
D4
Print tax symbols. b Yes = 0
No = 2
Always “0” ;
D3
;
D3
Print multiplication or item consolidation in one line. Yes = 0
No = 4 :
D2
;
D2
Print number of customers on header. Yes = 0
No = 2 :
D1
;
D1
*1 Select “Yes” if you want to print receipts with watermarks.

20
Key function/machine feature (P3)
Address code 06 (calculation & operation control)
Description Choice Program code Initial value
Follow the taxable status and commission status of previous item when
+/- operation is performed. aYes = 0 No = 1 :
(a+b)
D10
;
(a+b)
D10
Force a money declaration by b, n, N before read/reset report
operation. bNo = 0 Yes = 4
Force to press s before nalization. aNo = 0
Yes = 1 :
(a+b+c)
D9
;
(a+b+c)
D9
Allow credit balance while nalization. b Yes = 0
No = 2
Allow multiple refund/register minus operation. c Yes = 0
No = 4
Affect the result of +/- , %+ /%- to the item. (Net totalling) aNo = 0
Yes = 1 :
(a+b)
D8
;
(a+b)
D8
Include add-on/add-in tax in net total. b Yes = 0
No = 2
Includes commission in net total. Yes = 0
No = 2 :
D7
;
D7
Clear the key buffer when a receipt is issued. (REG only) aNo = 0
Yes = 1 :
(a+b+c)
D6
;
(a+b+c)
D6
Sounds key catch tone. b Yes = 0
No = 2
Allow to issue post receipt, even if the original one is issued. c No = 0
Yes = 4
Display “seconds” during time display. aNo = 0
Yes = 2 :
(a+b)
D5
;
(a+b)
D5
Connect slit drawer. b No = 0
Yes = 4
RF mode status RF = 0 ;
D4
;
D4
Treatment of at-PLU key numeric inputs:
1 Treat as amount override
2 Treat as quantity extensions
1= 0
2= 2 :
D3
;
D3
Use <00> key as <000> key. No = 0
Yes = 4 :
D2
;
D2
Always “0” ;
D1
;
D1
Address code 07 (menu shift)
Description Choice Program code Initial value
Maintenance of last menu shift:
1 Do not maintain, 2 Until next menu shift specication
1= 0
2= 1 :
D8
;
D8
Always “0000” ;;;;
D7 D6 D5 D4
;;;;
D7 D6 D5 D4
Always “000” ;;;
D3 D2 D1
;;;
D3 D2 D1
This program is not effective for SE-S400 and SE-S3000.