Castleton Home YX-ET402 Instruction sheet

For assistance with assembly or questions contact:
Wayfair Customer Service, 877-WAYFAIR (877-929-3247) | www.wayfair.com
PAGE 1
Product Instructions for:
YX-ET402 END TABLE
CONSOLE TABLE

For assistance with assembly or questions contact:
Wayfair Customer Service, 877-WAYFAIR (877-929-3247) | www.wayfair.com
PAGE 2
YX-ET402 END TABLE
Before beginning assembly, separate all parts and carefully study the parts
diagrams below. Review all parts and hardware before disposing of any
packaging. You may receive extra hardware with your unit. Call Customer
Service for missing hardware.
A: Top Panel (1)
B: Bottom Panel (1)
C: Leg (4)
1: Bolt Dia. 1/4”x1-3/4”L (12)
2: Spring Washer 1/4” (12)
3: Flat Washer 1/4”x3/4” (12)
4: Allen Wrench Dia. 1/4” (1)
Parts List

For assistance with assembly or questions contact:
Wayfair Customer Service, 877-WAYFAIR (877-929-3247) | www.wayfair.com
PAGE 3
YX-ET402 END TABLE
Figure 1
Unpack and lay parts on a
clean, padded surface like a
carpet or blanket. Check that
you have all parts indicated on
the front page.
Step 1
Connect three Legs (C) to Top
Panel (A) with Bolts (1), Spring
Washers (2) and Flat Washers
(3).
Tighten Bolts (1) with Allen
Wrench (4).
Warning: Do not over-tighten
Bolts (1).
Figure 2
Step 2
Connect Bottom Panel (B) to
pre-assembly unit in Figure 1
with Bolts (1), Spring Washers
(2) and Flat Washers (3).
Tighten Bolts (1) with Allen
Wrench (4).
Warning: Do not over-tighten
Bolts (1).
Assembly Instructions
C
A
C
4
3
B

For assistance with assembly or questions contact:
Wayfair Customer Service, 877-WAYFAIR (877-929-3247) | www.wayfair.com
PAGE 4
Figure 3
Step 3
Connect the fourth Leg (C) to
pre-assembly unit in Figure 2
with Bolts (1), Spring Washers
(2) and Flat Washers (3).
Tighten all Bolts (1) with Allen
Wrench (4).
Warning: Do not over-tighten
Bolts (1).
Figure 4
Step 4
Turn over the table.
Now your End Table is ready
to use!