Cateye CC-PA100W User manual

CATEYE PADRONE
CC-PA100W
Quick Start
Click the button and follow the
instructions.
START

Thank you for purchasing our cyclocomputer CATEYE PADRONE.
This Quick Start Manual explains how to set up the computer and how to install the unit on
your bicycle.
Please set up the unit according to the specified procedure, then it will be ready for use as a
cyclocomputer.
Before use, read the instruction manual that comes with the product thoroughly to the
end to understand the functions of this unit, and to use it safely in a correct manner.
Next

This PDF contains a movie file.
When you click on the movie screen, a message regarding security appears. Click the
“Trust in the text” or “Play” button to close the message.
Click the screen again to play the movie.
Next

CATEYE PADRONE
Quick Start Manual Contents
Click the item you wish to view.
Return to a Cover
Setting up the computer
How to install the speed sensor (movie)
How to install the bracket (movie)

Operation of buttons
Set up the computer by operating the buttons as follows.
Check the button position before you start setting up.
Back
Press the MENU button and the MODE
button on the back of the computer.
MENU
MODE
Next

CATEYE PADRONE
Quick Start Manual Setting up the computer
Setting the speed unit
Entering the tire circumference
Setting the clock display
Measuring screen
(Setup completed)
Setting the hour
Setting the minute
AC
Clear all data (initialization) Clear all data (initialization)
Press the
AC
button on the back of the computer.
After full lighting of the screen, the computer switch-
es to the speed unit setting screen to start setup.
Full lighting Setting the speed unit
Return to Contents
Next
Return

CATEYE PADRONE
Quick Start Manual Setting up the computer
Entering the tire circumference
Setting the clock display
Measuring screen
(Setup completed)
Setting the hour
Setting the minute
Setting the speed unit
Clear all data (initialization)
Setting the speed unit
Setting the speed unit
When the MODE button is pressed, either “km/h” or
“mph” is selected for the speed unit display. Select the
unit of your choice.
After selecting, press the MENU button to proceed to the
next step “Entering the tire circumference”.
To the next step
km/h ↔mph
MENU
MODE
Return to Contents
Next
Return

CATEYE PADRONE
Quick Start Manual
Setting the clock display
Measuring screen
(Setup completed)
Setting the hour
Setting the minute
Entering the tire circumference
Setting the speed unit
Clear all data (initialization)
Setting up the computer
Entering the tire circumference
Enter the tire circumference (mm) of your bicycle with 4
digits using the tire circumference reference table.
Pressing the MODE button increases the value flashing,
and pressing and holding the MODE button moves to
the next digit.
After entering, press the MENU button to proceed to the
next step “Setting the clock display”.
Entering the tire
circumference Move digit
Increase
the value To the next step
(Press
and hold)
MODE
MENU
MODE
Return to Contents
Next
Return
Tire circum-
ference refer-
ence table

CATEYE PADRONE
Quick Start Manual Setting up the computer
Setting the speed unit
Entering the tire circumference
Setting the clock display
Clear all data (initialization)
Measuring screen
(Setup completed)
Setting the hour
Setting the minute
Setting the clock display
Entering the tire circumference
Setting the speed unit
Clear all data (initialization) Setting the clock display
When the MODE button is pressed, either “12h” or “24h”
is selected for the clock display. Select the display of
your choice.
After selecting, press and hold the MODE button to pro-
ceed to the next step “Setting the hour”.
Clock display
To the next step
24h ↔12h
(Press
and hold)
MODE
MODE
Return to Contents
Next
Return

CATEYE PADRONE
Quick Start Manual Setting up the computer
Measuring screen
(Setup completed)
Setting the hour
Setting the minute
Setting the clock display
Entering the tire circumference
Setting the speed unit
Clear all data (initialization) Setting the hour
Pressing the MODE button increases the value flashing
(“Hour” of the clock). Enter any value.
After entering, press and hold the MODE button to pro-
ceed to the next step “Setting the minute”.
Hour
To the next stepIncrease the value
(Press
and hold)
Setting the hour
MODE
MODE
Return to Contents
Next
Return