CB2 sova User manual

Made in Philippines - r10 Page 1 of 2
sova BED
1
hardware
components
tools required
Thank you for purchasing the Sova Bed. This page
lists all the contents included in the box. Please take
the time to identify the hardware as well as the
individual components to this product. As you unpack
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from
damage.
Note: 2 people are required to safely assemble this product.
Missing hardware?
Please call 800.606.6387
for replacements.
A. With the assistance of another adult, position
headboard upright. Insert threaded studs of
headboard into corresponding holes in bracket of
side rails with 2 small flat washers, 2 spring
washers and 2 hex nuts per side rail. Secure, but
do not over tighten, bolts with a hex wrench.
B. Attach headboard to each side rail with 1 bolt
and 1 large flat washer, using a hex wrench.
phillips head screwdriver
1 - headboard
1 - footboard
2 - side rails
(1 right, 1 left)
1 - center rail
1 - slat
assembly
hex wrench (included)
(We recommend the use of hand tools instead of power tools)
headboard
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
NOTE: Do not over
tighten the bolts
2 - bolts 2 - large
flat washers
4- hex
nuts
28 - screws
BACK DETAIL OF HEADBOARD
left side
rail
right side
rail
bracket
4 - spring
washers
4 - small
flat washers
A
B

CLEANING AND CARE
Dust with a soft dry cloth. Periodically
vacuum upholstery.
Attach brackets of center rail to headboard with 2
screws as shown, using a screwdriver.
sova BED
Made in Philippines - r10 Page 2 of 2
2
4
Attach slat assembly to side rails with 12 screws
as shown.
Assembly is now complete.
3Attach brackets of center and side rails to
footboard with 4 screws as shown.
center
rail
footboard
NOTE: Make sure
straps of slat assembly
are facing down
as shown
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com