CB2 WALNUT User manual

Made in Vietnam - r04 Page 1 of 5
walnut LOW DRESSER
hardware
components
tools required
Thank you for purchasing the Walnut Low Dresser.
This page lists all the contents included in the box.
Please take the time to identify the hardware as well as
the individual components to this product. As you
unpack and prepare for assembly, place the contents on
a carpeted or padded area to protect them from
damage.
Note: 2 people are required to safely assemble this product.
Missing hardware?
Please call 800.606.6387 for replacements.
(We recommend the use of hand tools instead of power tools)
1 - top panel 1 - bottom panel 1 - partition1 - back panel
4 - large drawer
sides (2 right, 2 left)
4 - drawer bottoms 4 - pulls
2 - side panels
(1 right, 1 left)
2 - small drawer
fronts (1 right, 1 left)
2 - large drawer
fronts (1 right, 1 left)
2 - large drawer
backs
2 - small drawer
backs
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
phillips head screwdriver
32 - screws 8 - large
bolts
8 - small
bolts
9 - medium
bolts
12 - wood
dowels
9 - flat
washers
9 - spring
washers
6 - cam
screws
6 - cams
4 - legs
1 - center
support
4 - small drawer
sides (2 right, 2 left)

walnut LOW DRESSER
Made in Vietnam - r04 Page 2 of 5
12
A. Insert 4 wood dowels and 2 cams into
partition as shown. Make sure arrow on each cam
point toward nearest edge with holes.
B. Insert 4 wood dowels 2 cams into right and
left side panels as shown.
34
A. Attach 4 legs to bottom panel with 2 small
bolts per leg as shown. Secure, but do not over
tighten, bolts with a phillips head screwdriver.
B. Insert support leg to bottom panel. Turn
clockwise to secure.
NOTE: Do not
over tighten
the bolts
Insert back panel into grooves of side panels and
bottom panel as shown.
A. Position bottom panel upright. Fit dowels of side
panels and partition into bottom panel as shown.
B. Using a screwdriver, secure side panels and
partition with 9 medium bolts, 9 spring washers
and 9 flat washers.
A
B
NOTE: Make sure arrow
on each cam points
toward nearest edge
with holes
A
B
A
A
B
B
side panel
partition
NOTE: Make sure
grooves of side/bottom
panels are assembled
on the same side
during assembly
NOTE: Make sure the
drawer glides pull out away
from back grooves of side/bottom
panels during assembly
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com

walnut LOW DRESSER
Made in Vietnam - r04 Page 3 of 5
56
Insert 6 cam screws into top panel as shown.
Secure, but do not over tighten, the cam screws
with a screwdriver.
78
A. Attach left small drawer side to small
drawer front with 2 screws as shown. Secure,
but do not over tighten, screws with a screwdriver.
B. Insert drawer bottom into grooves of small
drawer front and side as shown.
A. Attach left small drawer side to small drawer
back with 2 screws as shown.
B. Attach right small drawer side to small
drawer front and back with 4 screws as shown.
A
B
B
NOTE: Do not
over tighten
the screws
A
NOTE: Do not
over tighten
the cam screws
With the assistance of another adult, fit dowels of
assembly into top panel as shown. Using a
screwdriver, turn each cam clockwise until it
securely engages each cam screw.
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com

910
11 12
walnut LOW DRESSER
Made in Vietnam - r04 Page 4 of 5
Attach 1 pull to small drawer front with 2 large
bolts as shown, using a screwdriver.
Repeat steps for remaining small drawer assembly.
A. Attach left large drawer side to large drawer
front with 2 screws as shown.
B. Insert drawer bottom into grooves of small
drawer front and side as shown.
A. Attach left large drawer side to large drawer
back with 2 screws as shown.
B. Attach right large drawer side to large drawer
front and back with 4 screws as shown.
A
B
B
A
Attach 1 pull to large drawer front with 2 large
bolts as shown, using a screwdriver.
Repeat steps for remaining large drawer assembly.
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com

walnut LOW DRESSER
Made in Vietnam - r04 Page 5 of 5
13
With the assistance of another adult, position unit upright. Fit drawer glides of drawer into corresponding
drawer glides of assembly as shown. Firmly push drawer into assembly until the glides are securely engaged.
Assembly is now complete.
cleaning & care
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as
the unit is finished with a protective clear lacquer. It is
recommended to use coasters to protect surface from
heat and water.
NOTE: Make sure to
insert right drawers to
the right side, and left
drawers to the left side
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com