CB2 intimo User manual

Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
Made in Vietnam- r06 Page 1 of 3
intimo SECRETARY DESK
hardware
components
tools required
Thank you for purchasing the Intimo Secretary Desk.
This page lists all the contents included in the box. Please
take the time to identify the hardware as well as the
individual components to this product. As you unpack and
prepare for assembly, place the contents on a carpeted or
padded area to protect them from damage.
Note: 2 people are recommended to safely assemble this product.
Missing hardware?
Please call 800.606.6387 for replacements.
4 - small
screws
8 - brackets8 - small
bolts
2 - large
bolts
10 - flat
washers
10 - spring
washers
8 - cams 8 - cam
screws
allen wrench (included)
phillips head screwdriver
1 - top panel
(We recommend the use of hand tools instead of power tools)
2 - side panels
(1 left, 1 right)
1 - bottom panel
1 - middle shelf 1 - door 1 - top
shelf
1 - crossbar
1 - back panel 1 - large cover 1 - small cover 1 - partition

Insert 2 cam screws into left and right side
panel as shown.
A. Fit 4 cams into middle shelf as shown.
B. Fit pre-assembled dowels of partition into
corresponding holes of bottom panel and
middle shelf as shown. Using an allen
wrench, secure assembly with 2 large bolts, 2
spring washers and 2 flat washers as shown. 4
3
1 2
Made in Vietnam - r06 Page 2 of 3
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
intimo SECRETARY
Insert 4 cam screws into top panel as shown,
using a flat head screwdriver. Do not over
tighten the cam screws.
left and right
side panel
top panel
bottom
panel
partition
middle
shelf
A. Fit dowels of desk assembly into correspond-
ing holes of left side panel as shown. Using an
allen wrench, turn each cam clockwise until it
securely engages each cam screw.
B. Fit hole of door into corresponding peg of left
side panel.
desk assembly
A
NOTE: Make sure arrow
on each cam points toward
nearest edge with holes
B
B
A
door
left side panel

8
6
A. Carefully position unit upright. Insert 4 cams
into left and right side panels. Fit top panel
onto corresponding dowels of assembly and
secure cams.
B. Place small and large covers into assembly as
shown. Assembly is now complete.
Made in Vietnam - r06
7
5
Page 3 of 3
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
intimo SECRETARY
A. Fit top shelf and back panel into corresponding
slots of left side panel.
B. Fit dowels of crossbar into left side panel.
C. Secure desk assembly and crossbar with 4
small bolts, 4 spring washers, 4 flat washers
and 4 brackets as shown. Secure, but do not over
tighten, bolts with an allen wrench.
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners.
A
B
Fit right side panel onto corresponding dowels
of assembly and hinge of door. Secure desk
assembly and crossbar with 4 small bolts, 4
spring washers, 4 flat washers and 4 brackets
as shown.
top
panel
Open door and secure hinges with 2 small
screws per hinge. Secure, but do not over
tighten, screws with a phillips head screwdriver.
A
NOTE: Make sure arrow
on each cam points toward
nearest edge with holes
crossbar
door
back
panel
top
shelf
NOTE: Do not
over tighten
the bolts
NOTE: Do not
over tighten
the screws
right side
panel
C
C
door
B
small
cover
large
cover