ENGLISH
5
high risk of explosion. It might
cause severe body injuries.
➢Do not install and use this
product in hazardous
environments (high risk of
explosion).
Installation and safety
➢Handle the lamp with care and
avoid having it drop or being
hit even it is still packed, which
might cause body injuries, as
well as material damages.
➢Ensure the original fixing
accessories are used, as
available from the
manufacturer.
➢Set up the fixing accessories
properly.
➢The equipment must be
correctly fastened using the
proper screws according to the
application, place and surface
where the product is being
mounted.
➢Ensure that the fastenings are
regularly checked.
Danger of dazzling glare due to a
white light source
Avoid staring directly at the light
source, as it may cause a
temporary reduction of vision.
Irritation, aches, damages, or
accidents may as well occur.
➢Avoid staring directly at the
light source.
➢The device must be adjusted
so as to avoid having the light
flow directed towards the
eyes.
Danger caused by inappropriate
spare parts.
Using inappropriate spare parts
may cause bodily injuries and
material damages.
➢Do not use spare parts that
have not been approved by
the manufacturer.
Damage caused by presence of
laser beams
Use of the KIT LED lighting
equipment is not allowed when a
high-power laser is operating,
since it may damage the Led
source.
Danger due to high temperatures
Installing and using the equipment
in all the environments where the
existing temperature remarkably
exceeds the foreseen operating
temperature will considerably
reduce Led lifetime while
damaging as well the built-in
electronic components.
➢Do not use this Device in
environments where the
operating temperature of the
device is exceeded.
➢Operating temperature -
4°/113°F (-20 / +45 °C)
➢Avoid direct solar radiation.
Danger due to repairs
Having the product disassembled
or repaired without any
appropriate technical /electrical
