CDV Group DGLP WLC User manual
www.cdvgroup.com
All the specications on this document (photos, drawing, features and dimensions) could be changed without prior notice.
Printed in Canada - Ref: CDVI_DGLP_DGLI_Readers_IE
Manufacturing Access Control since 1985
CDVI (Headquarters/Siège social)
FRANCE
Tel: +33 (0)1 48 91 01 02
Fax: +33 (0)1 48 91 21 21
CDV AMERICAS
CANADA
Tel: +1 (450) 682 7945
Fax: +1 (450) 682 9590
CDV BENELUX
BELGIUM
Tel: +32 (0)5 662 02 50
Fax: +32 (0)5 662 02 55
CDV CH
SWITZERLAND
Tel: +41 (0)21 882 18 41
Fax : +41 (0)21 882 18 42
CDV CHINA
CHINA
Tel: +86 (0)10 87664065
Fax: +86 (0)10 87664165
CDV IBÉRICA
SPAIN
Tel: +34 936 916 551
Fax: +34 935 801 278
CDV ITALIA
ITALIA
Tel: +39 0331 97 38 08
Fax: +39 0331 97 39 70
CDV MAROC
MOROCCO
Tel : +212 (0)22 48 09 40
Fax : +212 (0)22 48 34 69
CDV SWEDEN
SWEDEN
Tel: +46 (0)33 20 55 50
Fax: +46 (0)33 20 55 51
CDV UK Ltd
UNITED KINGDOM
Tel: +44 (0)1628 531300
Fax : +44 (0)1628 531003
DIGIT
FRANCE
Tel : +33 (0)1 41 71 06 85
Fax : +33 (0)1 41 71 06 86
LA GACHE ELECTRIQUE
FRANCE
Tel: +33 (0)3 88 77 32 82
Fax: +33 (0)3 88 77 85 02
PROCOFI
FRANCE
Tel: +33 (0)1 41 83 04 90
Fax: +33 (0)1 41 83 04 91
TECHNO EM
FRANCE
Tel: +33 (0)4 42 96 58 73
Fax: +33 (0)4 42 96 45 77
INSTALLATION MANUAL
Indoor/Outdoor
Wiegand Proximity Readers
DGLP WLC DGLP FN WLC DGLI WLC DGLI F WLC
www.cdvgroup.com
Installation Manual
www.cdvgroup.com
Wiegand Proximity Readers
98 mm (3.9")
77 mm (3")
19,5 mm
(.75")
140 mm
(5.5")
35 mm
(1.4")
21,5 mm
(.8")
104 mm (4.1")
80.5 mm (3.5")
23 mm
(.9")
140 mm
(5.5")
42 mm
(1.7")
23 mm
(.9")
PRODUCT OVERVIEW:
The DGLP WLC and DGLI WLC are two Wiegand Proximity readers, availa-
ble as standard size and narrow style (DGLP FN WLC et DGLI F WLC). Both
readers are sealed with epoxy, therefore they are suitable for external use
and have high resistance to vandalism.
DGLlWLC
DGLP FN WLC
DGLPWLC
DGLI F WLC
53
-25°C to +70°C
Measure and mark the center lines to
determine the reader position. Drill the
xing screw holes (Diametre: 4MM for the
mounting plate and 6MM for the reader).
Drill the wiring access area.
DGLI F WLC
Insert the brass anchors in the mounting
holes, connect the cable to the connectors,
then fasten the reader with the DIAX®
screws using the DIAX® spanner. Make
sure that the varistor is connected on the
lock (refer to page 2 «Recommendations»).
DGLP FN WLC
Insert the plastic anchors in the mounting
holes, connect the cable to the terminal
block, then fasten the reader with the
wooden screws. Put the covers on top of
the reader. Make sure that the varistor
is connected on the lock (refer to page 2
«Recommendations»).
Optional (MPLATE)
Single gang box mounting plate for the
DGLP FN WLC mullion polycarbonate
proximity reader.
Ref : DGLP FN WLC and DGLI F WLC
4
1
2
3
www.cdvgroup.com
Installation Manual
www.cdvgroup.com
Wiegand Proximity Readers
• Indoor / outdoor application
• Selectable Wiegand output, 26, 30 or 44-bits
• LED and built-in buzzer (internal or external mode)
• Potted electronics
• Input voltage: 12V DC
• Consumption: 100mA
RECOMMENDATIONS:
CONTENTS:
Recommended cables
4 twisted pairs 0.6 MM.
Suggested power supplies
These power supplies are
recommended with these Wiegand
readers:
- ARD12
- BS60
Optional
Single gang box mounting plate
for the DGLP FN WLC reader
(Ref: MPLATE).
Important
To protect the device from back - emf
do not forget to mount the varistor on
the lock in parallel.
Environment
If the readers are mounted in a
humid area or close to a sea shore,
we recommend applying a varnish
on the connections of the cable to
avoid oxidation.
Varistor Diax®
security
tool
Diax®
security
screw
Brass
anchor Right
cover Left
cover Plastic
anchor
Wood
screw
3 x 40
mm
DGLI WLC &
DGLI F WLC 1 1 2 2 - - - -
DGLP WLC &
DGLP F WLC 1 - - - 2 2 2 2
FEATURES:
Measure and mark the center lines to
determine the reader position. Drill the xing
screw holes (Diametre: 4MM for the mounting
plate and 6MM for the reader). Drill the wiring
access area.
DGLI WLC
Insert the brass anchors in the mounting
holes, connect the cable to the terminal block,
then fasten the reader with the DIAX® screws
using the DIAX® spanner. Make sure that the
varistor is connected on the lock (refer to page
2 «Recommendations»).
DGLP WLC
Insert the plastic anchors in the mounting
holes, connect the cable to the terminal block,
Then fasten the reader with the wooden
screws Leave an area to access the cable
to make the wiring). Put the covers on top
of the reader. Make sure that the varistor
is connected on the lock (refer to page 2
«Recommendations»).
MOUNTING INSTRUCTIONS:
1
2
3
Ref : DGLP WLC and DGLI WLC
www.cdvgroup.com
Installation Manual
www.cdvgroup.com
Wiegand Proximity Readers
• Indoor / outdoor application
• Selectable Wiegand output, 26, 30 or 44-bits
• LED and built-in buzzer (internal or external mode)
• Potted electronics
• Input voltage: 12V DC
• Consumption: 100mA
RECOMMENDATIONS:
CONTENTS:
Recommended cables
4 twisted pairs 0.6 MM.
Suggested power supplies
These power supplies are
recommended with these Wiegand
readers:
- ARD12
- BS60
Optional
Single gang box mounting plate
for the DGLP FN WLC reader
(Ref: MPLATE).
Important
To protect the device from back - emf
do not forget to mount the varistor on
the lock in parallel.
Environment
If the readers are mounted in a
humid area or close to a sea shore,
we recommend applying a varnish
on the connections of the cable to
avoid oxidation.
Varistor Diax®
security
tool
Diax®
security
screw
Brass
anchor Right
cover Left
cover Plastic
anchor
Wood
screw
3 x 40
mm
DGLI WLC &
DGLI F WLC 1 1 2 2 - - - -
DGLP WLC &
DGLP F WLC 1 - - - 2 2 2 2
FEATURES:
Measure and mark the center lines to
determine the reader position. Drill the xing
screw holes (Diametre: 4MM for the mounting
plate and 6MM for the reader). Drill the wiring
access area.
DGLI WLC
Insert the brass anchors in the mounting
holes, connect the cable to the terminal block,
then fasten the reader with the DIAX® screws
using the DIAX® spanner. Make sure that the
varistor is connected on the lock (refer to page
2 «Recommendations»).
DGLP WLC
Insert the plastic anchors in the mounting
holes, connect the cable to the terminal block,
Then fasten the reader with the wooden
screws Leave an area to access the cable
to make the wiring). Put the covers on top
of the reader. Make sure that the varistor
is connected on the lock (refer to page 2
«Recommendations»).
MOUNTING INSTRUCTIONS:
1
2
3
Ref : DGLP WLC and DGLI WLC
www.cdvgroup.com
Installation Manual
www.cdvgroup.com
Wiegand Proximity Readers
98 mm (3.9")
77 mm (3")
19,5 mm
(.75")
140 mm
(5.5")
35 mm
(1.4")
21,5 mm
(.8")
104 mm (4.1")
80.5 mm (3.5")
23 mm
(.9")
140 mm
(5.5")
42 mm
(1.7")
23 mm
(.9")
PRODUCT OVERVIEW:
The DGLP WLC and DGLI WLC are two Wiegand Proximity readers, availa-
ble as standard size and narrow style (DGLP FN WLC et DGLI F WLC). Both
readers are sealed with epoxy, therefore they are suitable for external use
and have high resistance to vandalism.
DGLP WLC
DGLP FN WLC
DGLI WLC
DGLI F WLC
53
-25°C to +70°C
Measure and mark the center lines to
determine the reader position. Drill the
xing screw holes (Diametre: 4MM for the
mounting plate and 6MM for the reader).
Drill the wiring access area.
DGLI F WLC
Insert the brass anchors in the mounting
holes, connect the cable to the connectors,
then fasten the reader with the DIAX®
screws using the DIAX® spanner. Make
sure that the varistor is connected on the
lock (refer to page 2 «Recommendations»).
DGLP FN WLC
Insert the plastic anchors in the mounting
holes, connect the cable to the terminal
block, then fasten the reader with the
wooden screws. Put the covers on top of
the reader. Make sure that the varistor
is connected on the lock (refer to page 2
«Recommendations»).
Optional (MPLATE)
Single gang box mounting plate for the
DGLP FN WLC mullion polycarbonate
proximity reader.
Ref : DGLP FN WLC and DGLI F WLC
4
1
2
3
www.cdvgroup.com
Installation Manual
www.cdvgroup.com
Wiegand Proximity Readers
JUMPER SETTING AND WIRING DIAGRAM:
26-bit Wiegand ouput (Default)
+5V (Default)
+12V
30-bit Wiegand ouput
44-bit Wiegand ouput
1 = ON: External Buzzer Activation
2 = ON: External LED Activation
1 = OFF: Internal Buzzer Activation (Default)
2 = OFF: Internal LED Activation (Default)
BUZZER AND LED DIPSWITCH SETTINGS
ON
1 2
ON
1 2
DIPSWITCH setting will take effect at power up only
DGLI F WLC DGLP FN WLC
ON
1 2
ON
1 2
PULL UPS JUMPER SETTING
WIEGAND OUTPUT JUMPER SETTING
CT-V900-A
2-Door Controller
DO
GND
D1
12V
OUT1
OUT2
OUT5
GREEN
BLACK
WHITE
RED
YELLOW (green LED)
ORANGE (red LED)
BROWN (buzzer)
Blue (Clock)
Not applicable with
Centaur System
Reader wiring is shown with a 2-door
controller CT-V900-A and default jumper
setting of the reader (see above). It may differ
from other controllers. Please consult the
manufacturer for details.
DGLP FN
WLC DGLI F
WLC
CAT5 CABLE
(unshield 4 twisted paire cable)
ON
1 2
HD0 D1 B
-R
V
+
26-bit Wiegand ouput (Default)
+5V (Default)
+12V
30-bit Wiegand ouput
44-bit Wiegand ouput
1 = ON: External Buzzer Activation
2 = ON: External LED Activation
1 = OFF: Internal Buzzer Activation (Default)
2 = OFF: Internal LED Activation (Default)
ON
1 2
ON
1 2
DIPSWITCH setting will take effect at power up only
ON
1 2
HD0 D1 B
-R
V
+
DGLP WLC
or
DGLI WLC
BUZZER AND LED DIPSWITCH SETTINGS
PULL UPS JUMPER SETTING
WIEGAND OUTPUT JUMPER SETTING
CT-V900-A
2-Door Controller
CAT5 CABLE
(unshield 4 twisted paire cable)
DO
GND
D1
12V
OUT1
OUT2
OUT5
DO
-
D1
+
V(green LED)
R(red LED)
B(buzzer)
H(Clock)
Not applicable with
Centaur System
Reader wiring is shown with a
2-door controller CT-V900-A
and default jumper setting of
the reader (see above). It
may differ from other
controllers. Please consult
the manufacturer for details.
or
DGLP WLC
DGLI WLC
www.cdvgroup.com
Installation Manual
www.cdvgroup.com
Wiegand Proximity Readers
JUMPER SETTING AND WIRING DIAGRAM:
26-bit Wiegand ouput (Default)
+5V (Default)
+12V
30-bit Wiegand ouput
44-bit Wiegand ouput
1 = ON: External Buzzer Activation
2 = ON: External LED Activation
1 = OFF: Internal Buzzer Activation (Default)
2 = OFF: Internal LED Activation (Default)
BUZZER AND LED DIPSWITCH SETTINGS
ON
1 2
ON
1 2
DIPSWITCH setting will take effect at power up only
DGLI F WLC DGLP FN WLC
ON
1 2
ON
1 2
PULL UPS JUMPER SETTING
WIEGAND OUTPUT JUMPER SETTING
CT-V900-A
2-Door Controller
DO
GND
D1
12V
OUT1
OUT2
OUT5
GREEN
BLACK
WHITE
RED
YELLOW (green LED)
ORANGE (red LED)
BROWN (buzzer)
Blue (Clock)
Not applicable with
Centaur System
Reader wiring is shown with a 2-door
controller CT-V900-A and default jumper
setting of the reader (see above). It may differ
from other controllers. Please consult the
manufacturer for details.
DGLP FN
WLC DGLI F
WLC
CAT5 CABLE
(unshield 4 twisted paire cable)
ON
1 2
HD0 D1 B
-R
V
+
26-bit Wiegand ouput (Default)
+5V (Default)
+12V
30-bit Wiegand ouput
44-bit Wiegand ouput
1 = ON: External Buzzer Activation
2 = ON: External LED Activation
1 = OFF: Internal Buzzer Activation (Default)
2 = OFF: Internal LED Activation (Default)
ON
1 2
ON
1 2
DIPSWITCH setting will take effect at power up only
ON
1 2
HD0 D1 B
-R
V
+
DGLP WLC
or
DGLI WLC
BUZZER AND LED DIPSWITCH SETTINGS
PULL UPS JUMPER SETTING
WIEGAND OUTPUT JUMPER SETTING
CT-V900-A
2-Door Controller
CAT5 CABLE
(unshield 4 twisted paire cable)
DO
GND
D1
12V
OUT1
OUT2
OUT5
DO
-
D1
+
V(green LED)
R(red LED)
B(buzzer)
H(Clock)
Not applicable with
Centaur System
Reader wiring is shown with a
2-door controller CT-V900-A
and default jumper setting of
the reader (see above). It
may differ from other
controllers. Please consult
the manufacturer for details.
or
DGLP WLC
DGLI WLC
www.cdvgroup.com
All the specications on this document (photos, drawing, features and dimensions) could be changed without prior notice.
Printed in Canada - Ref: CDVI_DGLP_DGLI_Readers_IE
Manufacturing Access Control since 1985
CDVI (Headquarters/Siège social)
FRANCE
Tel: +33 (0)1 48 91 01 02
Fax: +33 (0)1 48 91 21 21
CDV AMERICAS
CANADA
Tel: +1 (450) 682 7945
Fax: +1 (450) 682 9590
CDV BENELUX
BELGIUM
Tel: +32 (0)5 662 02 50
Fax: +32 (0)5 662 02 55
CDV CH
SWITZERLAND
Tel: +41 (0)21 882 18 41
Fax : +41 (0)21 882 18 42
CDV CHINA
CHINA
Tel: +86 (0)10 87664065
Fax: +86 (0)10 87664165
CDV IBÉRICA
SPAIN
Tel: +34 936 916 551
Fax: +34 935 801 278
CDV ITALIA
ITALIA
Tel: +39 0331 97 38 08
Fax: +39 0331 97 39 70
CDV MAROC
MOROCCO
Tel : +212 (0)22 48 09 40
Fax : +212 (0)22 48 34 69
CDV SWEDEN
SWEDEN
Tel: +46 (0)33 20 55 50
Fax: +46 (0)33 20 55 51
CDV UK Ltd
UNITED KINGDOM
Tel: +44 (0)1628 531300
Fax : +44 (0)1628 531003
DIGIT
FRANCE
Tel : +33 (0)1 41 71 06 85
Fax : +33 (0)1 41 71 06 86
LA GACHE ELECTRIQUE
FRANCE
Tel: +33 (0)3 88 77 32 82
Fax: +33 (0)3 88 77 85 02
PROCOFI
FRANCE
Tel: +33 (0)1 41 83 04 90
Fax: +33 (0)1 41 83 04 91
TECHNO EM
FRANCE
Tel: +33 (0)4 42 96 58 73
Fax: +33 (0)4 42 96 45 77
INSTALLATION MANUAL
Indoor/Outdoor
Wiegand Proximity Readers
DGLP WLC DGLP FN WLC DGLI WLC DGLI F WLC
This manual suits for next models
3
Table of contents
