CFM ABP-0905 User manual

better AIRFLOW
by DESIGNTM
Custom Fan SolutionsTM
• Spark resistant cast aluminum airfoil axial impeller
• Aerodynamically efficient performance
• Factory set adjustable pitch blades
• Heavy duty welded steel construction
• Self-aligning pillow block bearings
• TEFC industrial duty motor
• Sizes range from 24” to 60”
• Belt drive capacities to 44,600 cfm
PANEL & FLANGE FANS
ABP
BELT DRIVE
PANEL FANS

SSTTAANNDDAARRDDFFEEAATTUURREESS&&BBEENNEEFFIITTSS
• Spark resistant cast aluminum airfoil axial impeller
• Factory set adjustable pitch blades
• Aerodynamically efficient performance
• Heavy duty welded steel frame and panel construction
• Air dried enamel paint finish
• TEFC industrial duty motor
• Self-aligning pillow block ball bearings
• V-belt drives for low speed operation
AAPPPPLLIICCAATTIIOONNSS
• Power plant ventilation • Warehouse ventilation
• Parking garage ventilation • General ventilation
AACCCCEESSSSOORRIIEESS//OOPPTTIIOONNSS
• Epoxy or Eisenheiss coatings • Gravity shutters
• Motor operated shutters • Bird screen for shutters
• Variable pitch sheaves • Reverse flow construction
• Mounting boot - interior or exterior mount • Weather hood complete with bird screen
• Explosion proof motors • Motor side guard
• Special duty motors • Propeller side guard
• AMCA spark resistant construction
A C
B
TUBULAR SUPPORT
ARMS
D
EF
AIRFLOW
AABBPPBBEELLTTDDRRIIVVEEPPAANNEELLFFAANNSS
MODEL A B C D E F
WT (LBS)
LESS MOTOR
MAX MTR
FRAME
ABP-24 30 30 25.5 20 2.8 3.5 100 145T
ABP-30 36 36 31.5 20 2.8 3.5 135 145T
ABP-36 42 42 37.5 22 2.8 4.0 170 145T
ABP-42 48 48 44.0 24 2.8 4.5 185 184T
ABP-48 54 54 50.5 25 2.8 4.5 195 184T
ABP-54 60 60 56.5 26 2.8 4.8 270 184T
ABP-60 66 66 62.5 28 2.8 5.0 330 184T
DIMENSIONS IN INCHES*
MODEL
MINIMUM
CFM
MAXIMUM
CFM
ABP-24 800 4,900
ABP-30 900 10,600
ABP-36 1,000 16,554
ABP-42 1,642 23,645
ABP-48 5,000 33,160
ABP-54 9,000 37,450
ABP-60 12,850 44,600
PERFORMANCE RATING
*DO NOT USE FOR CONSTRUCTION CONSULT FACTORY FOR CERTIFIED PRINTS

AABBPPBBEELLTTDDRRIIVVEEPPAANNEELLFFAANNSS
1. Motor side guard
2. Mounting boot
3. Gravity shutter
12
3
AACCCCEESSSSOORRIIEESS//OOPPTTIIOONNSS
PPRROODDUUCCTTSSPPEECCIIFFIICCAATTIIOONNGGUUIIDDEE
11..00GGEENNEERRAALL
A. Fans shall be model ABP Belt Drive Panel Fans, as manufactured by Continental Fan Manufacturing Inc.,
of Buffalo, NY, and of the size, capacity and flow direction as indicated on the drawings and fan schedule.
B. Fans shall be rated and tested in accordance with ANSI/AMCA Standard 210-99.
C. All motors and electrical components shall conform to NEMA standards.
22..00FFAANNHHOOUUSSIINNGG
A. Fan housing shall be constructed of welded heavy gauge steel panel and frame.
B. Fan panel shall have a deep venturi for smooth air entry, and shall be suitable for standard or reverse
air flow, as required.
C. Fan housing and adjustable motor base shall be coated with an air dried gray enamel finish.
33..00FFAANNIIMMPPEELLLLEERR
A. Axial impeller shall be constructed of spark resistant die cast aluminum airfoil shaped blades secured
to a die cast aluminum hub assembly.
B. Axial impeller blades shall be of adjustable pitch construction with multiple hub-to-blade arrangements
to maximize air performance. Blade pitch angles shall be factory set.
C. Axial impeller hub shall be designed to incorporate a split taper bushing, and be keyed directly to drive shaft.
44..00FFAANNMMOOTTOORRAANNDDDDRRIIVVEE
A. Motor shall be TEFC industrial duty and conform to NEMA standards.
B. Motor shall be of voltage, horsepower, RPM and enclosure as indicated on the fan schedule.
C. Fan sheaves shall be cast iron and appropriately sized and aligned.
D. Fan belts shall be static conducting, plus oil and heat resistant.
E. Fan shaft shall be steel, turned, ground and polished.
F. Fan shaft bearings shall be lubricated, self-aligning ball type in cast iron pillow block mounts with
external grease fittings.
55..00OOPPTTIIOONNAALLFFAANNAACCCCEESSSSOORRIIEESS
A. Where indicated, fan shall be provided with the following optional accessories:
• Bird screen for shutters • Propeller side guard • Motor side guard
• Weather hood complete with bird screen • Variable pitch sheaves • Mounting boot
• AMCA spark resistant construction • Motor operated shutter • Gravity shutter
• Protective coatings for fan housing • Motors
- Epoxy - Special Duty
- Eisenheiss - Explosion Proof
66..00FFAANNTTEESSTTIINNGG
A. Axial impeller shall be balanced and mounted in fan assembly.
B. Fan assembly shall be run and tested prior to shipment.
C. A test report shall be maintained on file for each individual fan.

ABP-0905
AABBPPBBEELLTTDDRRIIVVEEPPAANNEELLFFAANNSS