CFM APW-0906 User manual

better AIRFLOW
by DESIGNTM
Custom Fan SolutionsTM
• Spark resistant cast aluminum airfoil axial impeller
• Aerodynamically efficient performance
• Factory set adjustable pitch blades
• Deep drawn steel venturi with baked polyester paint
• Heavy duty welded steel construction
• TEFC industrial duty motor
• Sizes range from 14” to 60”
• Direct drive capacities to 60,000 cfm
PANEL & FLANGE FANS
APW
DIRECT DRIVE
PANEL FANS

SSTTAANNDDAARRDDFFEEAATTUURREESS&&BBEENNEEFFIITTSS
• Spark resistant cast aluminum airfoil axial impeller
• Factory set adjustable pitch blades
• Aerodynamically efficient performance
• Heavy duty welded steel motor base and panel construction
• Baked polyester powder coat paint finish
• TEFC industrial duty motor
• Simple maintenance– no belts or pulleys
AAPPPPLLIICCAATTIIOONNSS
• General ventilation • Power plant ventilation
• Petrochemical ventilation • Foundry ventilation
• Parking garage ventilation • Warehouse & distribution center ventilation
AACCCCEESSSSOORRIIEESS//OOPPTTIIOONNSS
• Motor operated shutter • Gravity shutter
• Mounting boot • Bird screen
• Explosion proof motors • Reverse flow construction
• Special duty motors • Weather hood
• AMCA spark resistant construction • Special materials and coatings - consult factory
• Motor side guard • Propeller side guard
*DO NOT USE FOR CONSTRUCTION CONSULT FACTORY FOR CERTIFIED PRINTS
AAPPWWDDIIRREECCTTDDRRIIVVEEPPAANNEELLFFAANNSS
A
A
D
R
M MAX.
C
NOMINAL
S REF.
U MAX.
T
B
6 BLADE PROPELLER SHOWN
OTHER SELECTIONS AVAILABLE
DUAL FLARED STEEL
PANEL VENTURI
WELDED MOTOR
SUPPORTS
DIRECT DRIVE
MOTOR
SINGLE DROP LEG SIZES THRU 36"
TWIN DROP LEGS SIZES OVER 36"
MODEL A B C D M R S T U
MAX MTR
FRAME
APW-14 18.0 9.0 14.8 9.3 11.1 2.0 1.8 0.1 12.9 56
APW-16 20.0 10.0 16.8 9.3 11.9 2.0 2.5 0.1 14.4 56
APW-18 22.0 11.0 18.8 10.1 13.1 2.0 2.5 0.1 15.6 182/4T
APW-21 24.0 12.0 20.8 9.6 12.8 2.0 3.3 0.1 16.1 182/4T
APW-24 30.0 15.0 24.8 12.7 15.2 2.8 3.6 0.1 18.8 213/5T
APW-27 32.0 16.0 27.9 12.7 15.2 2.8 4.0 0.1 19.2 213/5T
APW-30 36.0 18.0 31.0 12.8 15.2 2.8 3.7 0.1 18.8 213/5T
APW-36 42.0 21.0 36.9 17.4 19.8 2.8 4.3 0.1 24.1 254/6T
APW-42 48.0 24.0 42.9 17.4 19.8 2.8 4.8 0.1 24.6 254/6T
APW-48 54.0 27.0 48.9 19.7 23.6 2.8 4.8 0.1 28.3 284/6T
APW-54 60.0 30.0 55.0 22.4 26.9 2.8 5.0 0.1 31.9 324/6T
APW-60 Contact Factory
DIMENSIONS IN INCHES*
MODEL
MAXIMUM
CFM
APW-14 3,000
APW-16 4,500
APW-18 6,000
APW-21 7,500
APW-24 12,000
APW-27 16,000
APW-30 22,000
APW-36 28,000
APW-42 36,000
APW-48 46,000
APW-54 60,000
APW-60 Contact Factory
PERFORMANCE RATING

AAPPWWDDIIRREECCTTDDRRIIVVEEPPAANNEELLFFAANNSS
PPRROODDUUCCTTSSPPEECCIIFFIICCAATTIIOONNGGUUIIDDEE
11..00GGEENNEERRAALL
A. Fans shall be model APW Direct Drive Panel Fans, as manufactured by Continental Fan Manufacturing Inc.,
of Buffalo, NY, and of the size, capacity and flow direction as indicated on the drawings and fan schedule.
B. Fans shall be rated and tested in accordance with ANSI/AMCA Standard 210-99.
C. All motors and electrical components shall conform to NEMA standards.
22..00FFAANNHHOOUUSSIINNGG
A. Fan housing shall be constructed of welded heavy gauge steel panel and motor base.
B. Fan panel shall have a deep venturi for smooth air entry, and shall be suitable for standard or reverse
air flow, as required.
C. Fan housing and motor base shall be coated with baked polyester powder coat finish.
33..00FFAANNIIMMPPEELLLLEERR
A. Axial impeller shall be constructed of spark resistant die cast aluminum airfoil shaped blades secured
to a die cast aluminum hub assembly.
B. Axial impeller blades shall be of adjustable pitch construction with multiple hub-to-blade arrangements
to maximize air performance. Blade pitch angles shall be factory set.
C. Axial impeller hub shall be designed to incorporate a split taper bushing, and be keyed directly to drive shaft.
44..00FFAANNMMOOTTOORRAANNDDDDRRIIVVEE
A. Motor shall be TEFC industrial duty and conform to NEMA standards.
B. Motor shall be of voltage, horsepower, RPM and enclosure as indicated on the fan schedule.
55..00OOPPTTIIOONNAALLFFAANNAACCCCEESSSSOORRIIEESS
A. Where indicated, fan shall be provided with the following optional accessories:
• Mounting boot • AMCA spark resistant construction
• Gravity shutter • Bird screen
• Motor operated shutter • Motor side guard
• Reverse flow construction • Propeller side guard
• Weather hood • Special materials and coatings - consult factory
• Motors
- Explosion Proof
- Special Duty
66..00FFAANNTTEESSTTIINNGG
A. Axial impeller shall be balanced and mounted in fan assembly.
B. Fan assembly shall be run and tested prior to shipment.
C. A test report shall be maintained on file for each individual fan.
1. Motor side guard
2. Mounting boot
3. Gravity shutter
12
3
AACCCCEESSSSOORRIIEESS//OOPPTTIIOONNSS

APW-0906
AAPPWWDDIIRREECCTTDDRRIIVVEEPPAANNEELLFFAANNSS