MyQ™LAMP MODULE
MODEL 825LM
The Lamp Module offers a quick and convenient way to
control the lights in your home. The module can be
programmed to a remote control, a garage door opener, or
a MyQ™ Gateway device. The module is compatible with
up to 5 Security✚®2.0 remote controls OR a combination
of up to 3 garage door openers or MyQ™ Gateway devices.
This product is NOT recommended for household
appliances.
SPECIFICATIONS
Bulb Type: Compact fluorescent, incandescent, halogen,
or LED
Bulb Wattage: Up to 150 Watts
MODES OF OPERATION
INSTALLATION & PROGRAMMING
To prevent possible SERIOUS INJURY or
DEATH from electrocution or fire, the light
control is ONLY for indoor use.
NOTICE: To comply with FCC and or Industry Canada rules (IC),
adjustment or modifications of this receiver and/or transmitter
are prohibited, except for changing the code setting or
replacing the battery. THERE ARE NO OTHER USER
SERVICEABLE PARTS.
Tested to Comply with FCC Standards for Home or office use.
Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device
must accept any interference received, including interference
that may cause undesired operation.
Power Button
Lamp
Outlet
LED
Learn
Button
REMOTE CONTROL OPERATION:
Allows you to activate the
module from a remote
control.
OVERVIEW
114A4265 © 2011, The Chamberlain Group, Inc.
All Rights Reserved
1-800-528-9131
www.liftmaster.com
ONE YEAR LIMITED WARRANTY
The Chamberlain Group, Inc. warrants to the first retail purchaser of this
product that is free from defect in materials and/or workmanship for a
period of 1 year from the date of purchase.
TO ERASE ALL PROGRAMMING
Press and hold the Learn button on the module for 6 seconds. All
programming is now erased.
The module can be programmed to a remote control, a garage door opener, or a MyQ™ Gateway device.
GARAGE DOOR OPENER OPERATION:
Allows you to synchronize
the module with your garage
door opener light bulbs.
Example: The garage door
opener light bulbs are set to
automatically turn off after 4 ½ minutes, the
module will also turn off after 4 ½ minutes.
MyQ™GATEWAY OPERATION:
Allows you to activate the
module from a web
browser (requires a MyQ™
Gateway device).
1Plug the lamp into the module and plug
the module into an electrical outlet (the
LED on the module will flash). NOTE:
Make sure the lamp is switched ON.
2If the lamp is not ON, press and release
the Power button on the module to turn
the lamp ON.
3Press and release the Learn button on
the module (the LED on the module
will light).
4Press the following (depending on the mode of operation): The lamp’s light bulb will blink and the
LED on the module will turn OFF when the
device has been programmed.
Button on
Remote Control
Learn Button on
Garage Door Opener
Learn Button on MyQ™
Gateway device
