Chattanooga Huber 360 Safety guide

HOW TO CONNECT
YOUR POLAR TO HUBER 360

FIRST STEP
Before training moisten the electrode areas of the strap

SECOND STEP
Clip the strap around your chest and adjust the strap to fit snugly.

THIRD STEP
Attach the connector.
After training, detach the connector and rinse the strap.

FOURTH STEP
As Long as your Polar is ON , attached to the body
, it should be automatically detected
by the HUBER DEVICE
No need of any action in the HUBER Tools menu.
A window will pop up on the Home screen .

LAST STEP
Select the serial number corresponding to the belt
on the HUBER 360 screen ( it might be few polar systems in the area)

YOUR HEART FREQUENCY
You heart rate frequency appears on the HUBER 360 screen.
Click on it to open the menu.

YOUR HEART FREQUENCY
You can choose a maximum and a minimum
to work on the good intensity.