Chauvet Professional REM-RB200CM IP User manual

Model ID: REMRB200CMIP
User Manual

REM-RB200CM IP User Manual Rev. 1
Edition Notes
The REM-RB200CM IP User Manual includes a description, safety precautions, installation, programming,
operation and maintenance instructions for the REM-RB200CM IP as of the release date of this edition.
Trademarks
Chauvet, Chauvet Professional, the Chauvet logo, and REM are registered trademarks or trademarks of
Chauvet & Sons, LLC (d/b/a Chauvet and Chauvet Lighting) in the United States and other countries.
Other company and product names and logos referred to herein may be trademarks of their respective
companies.
Copyright Notice
The works of authorship contained in this manual, including, but not limited to, all designs, text, and images
are owned by Chauvet.
© Copyright 2023 Chauvet & Sons, LLC. All rights reserved.
Electronically published by Chauvet in the United States of America.
Manual Use
Chauvet authorizes its customers to download and print this manual for professional information purposes
only. Chauvet expressly prohibits the usage, copy, storage, distribution, modification, or printing of this
manual or its content for any other purpose without written consent from Chauvet.
Document Printing
For best results, print this document in color, on letter size paper (8.5 x 11 in), double-sided. If using A4
paper (210 x 297 mm), configure the printer to scale the content accordingly.
Intended Audience
Any person installing, operating, and/or maintaining this product should completely read through the guide
that shipped with the product, as well as this manual, before installing, operating, or maintaining this
product.
Disclaimer
Chauvet believes that the information contained in this manual is accurate in all respects. However,
Chauvet assumes no responsibility and specifically disclaims any and all liability to any party for any loss,
damage or disruption caused by any errors or omissions in this document, whether such errors or
omissions result from negligence, accident or any other cause. Chauvet reserves the right to revise the
content of this document without any obligation to notify any person or company of such revision, however,
Chauvet has no obligation to make, and does not commit to make, any such revisions. Download the latest
version from www.chauvetprofessional.com.
Document Revision
This is revision 1 of the REM-RB200CM IP User Manual. Go to www.chauvetprofessional.com for the
latest version.

REM-RB200CM IP User Manual Rev. 1
Table of Contents
i
TABLE OF CONTENTS
1. Before You Begin ....................................................................... 1
What Is Included ........................................................................................... 1
Claims ........................................................................................................... 1
Text Conventions .......................................................................................... 1
Symbols ........................................................................................................ 1
Safety Notes.................................................................................................. 2
2. Introduction ................................................................................ 3
Description .................................................................................................... 3
Features........................................................................................................ 3
Product Overview.......................................................................................... 3
Product Dimensions ...................................................................................... 4
3. Setup ........................................................................................... 5
Mounting ....................................................................................................... 5
Orientation.......................................................................................................... 5
Rigging ............................................................................................................... 5
Overhead Mounting............................................................................................ 5
Clamp Attachment Bracket ............................................................................................. 6
Removing the Hoist Rings .............................................................................................. 6
Stacking ............................................................................................................. 7
Stacking with Ground Support 2 Kit................................................................................ 8
Adjusting the Height ...................................................................................... 9
Inspecting for Faults...................................................................................... 9
4. Technical Specifications ........................................................... 10
Contact Us ...................................................................................... 11
Warranty & Returns....................................................................................... 11

1
Before You Begin
REM-RB200CM IP User Manual Rev. 1
1. Before You Begin
What Is Included
Claims
Carefully unpack the product immediately and check the container to make sure all the parts are in the
package and are in good condition.
If the box or the contents (the product and included accessories) appear damaged from shipping, or show
signs of mishandling, notify the carrier immediately, not Chauvet. Failure to report damage to the carrier
immediately may invalidate a claim. In addition, keep the box and contents for inspection.
For other issues, such as missing components or parts, damage not related to shipping, or concealed
damage, file a claim with Chauvet within 7 days of delivery.
Text Conventions
Symbols
•REM-RB200CMIP
• 4x Clamp attachment bracket (DRB-CTC)
• 4x Clamp bolt for TRUSST CTC-50HC
• Quick Reference Guide
Convention Meaning
1–512 A range of values
50/60 A set of values of which only one can be chosen
Settings A menu option not to be modified
<ENTER> A key to be pressed on the product’s control panel
Symbol Meaning
Critical installation, configuration, or operation information. Not following these
instructions may make the product not work, cause damage to the product, or cause
harm to the operator.
Important installation or configuration information. The product may not function correctly
if this information is not used.
Useful information.

2
REM-RB200CM IP User Manual Rev. 1
Before You Begin
Safety Notes
Read all the following safety notes before working with this product. These notes contain important
information about the installation, usage, and maintenance of this product.
• ALWAYS:
• Take environmental aspects into account when using outdoors. The performance or structural
integrity of LED video panels and rigging hardware may be affected by sunlight, rain, or
especially, wind.
• Consult with a professional structural engineer for any Temporary Demountable Structure
(temporary indoor or outdoor stage) designs to ensure this product can be used safely in each
application.
•DONOT:
• Submerge this product (adhere to standards for the published IP rating). Regular outdoor
operation is fine.
• Permanently install outdoors in locations with extreme environmental conditions. This includes,
but is not limited to:
• Exposure to a marine/saline environment (within 3 miles of a saltwater body of water).
• Locations where normal temperatures exceed the temperature ranges in this manual.
• Locations that are prone to flooding or being buried in snow.
• Other areas where the product will be subject to extreme radiation or caustic substances.
• In the event of a serious operating problem, stop using immediately.
This product contains no user-serviceable parts. Any reference to servicing in this User
Manual will only apply to properly trained, certified technicians. Do not open the housing
or attempt any repairs.
All applicable local codes and regulations apply to proper installation of this product.
If a Chauvet product requires service, contact Chauvet Technical Support.

3
Introduction
REM-RB200CM IP User Manual Rev. 1
2. Introduction
Description
The REM-RB200CM IP is a dual-function rig bar which can be used to hang video panels overhead and for
ground-stacking purposes with the Ground Support 2 Kit. With an IP65 rating, use in combination with
REM IP video panels for versatile and easy video wall setups almost anywhere.
Features
• REM Rig Bar, used for both overhead hanging and ground stacking
•Works with Chauvet REM video panels
•Equipped hoist ring supports standard rigging hardware for overhead hanging (1/2” and 5/8”
shackles)
•Included Clamp attachment bracket (DRB-CTC) allows for direct connection using M12 bolts in
clamps using TRUSST CTC-50HC
Product Overview
TopBackSidesBottom
Alignment
hole (x8)
Receiver (x8)
(for stacking)
Vertical
alignment
conical (x8)
Hoist
assembly
Height
adjustment
bolt (x4)
Latch
(x9)
Receiver (x6)
(For use with
Ground Support 2 Kit)
Alignment
holes
Horizontal
alignment
pins
Alignment
hole (x8)
Alignment
magnet
(x8)
Light-
blocking
foam
TR16
screw jack
mount (x3)
Hoist
assembly
Hoist
assembly
Hoist
assembly
Alignment
hole
Receiver

4
REM-RB200CM IP User Manual Rev. 1
Introduction
Product Dimensions
4.72 in
120 mm
2.36 in
60 mm
78.2 in
1,999.6 mm

5
Setup
REM-RB200CM IP User Manual Rev. 1
3. Setup
Mounting
Before mounting the product, read and follow the safety recommendations indicated in the Safety Notes.
Orientation
Always mount this product in a safe position, making sure there is adequate room for ventilation,
configuration, and maintenance.
Rigging
Chauvet recommends using the following general guidelines when mounting this product.
• Before deciding on a location for the product, make sure there is easy access for maintenance.
• Make sure that the structure and attachment points can support the weight before hanging the
product and attaching REM video panels to it. See the Technical Specifications for weight
information, and download the User Manuals for REM video panels from
www.chauvetprofessional.com.
• When rigging the product onto a truss, use mounting hardware of appropriate weight capacity.
Overhead Mounting
1. Insert alignment conicals into the alignment holes and allow magnets to connect.
2. Insert the rig bar latch locking bars into the receivers on the REM video panel.
3. Twist the spring knob on the rig bar latch by 90°, until it locks into place.
4. Twist the tightening knob clockwise until REM video panel is secure to the rig bar.
5. To detach the rig bar from the REM video panel, reverse the previous steps.
Warning! The magnetic attachments are not load-bearing, and are intended for alignment
assistance only. Do not release the video panel until the hanging hardware has been fully
secured.
Latch (x9)
Tightening
knob
Spring
knob
Locking
bar
Rig Bar Latch
Vertical alignment
conical (x8)

6
REM-RB200CM IP User Manual Rev. 1
Setup
Clamp Attachment Bracket
To mount the REM-RB200CM IP overhead with standard Trusst clamps, follow the instructions under
Removing the Hoist Rings and replace the hoist rings with the included clamp attachment brackets.
For the Chauvet Professional line of mounting clamps, go to http://trusst.com/products/.
Removing the Hoist Rings
To remove a hoist ring from the REM-RB200CM IP:
1. Remove the safety clip from the hoist pin.
2. Slide the hoist pin out of the hoist assembly.
3. To re-install the hoist ring or to install the included Clamp Attachment Bracket, reverse the
previous steps.
Take special care of the washers when removing and installing the hoist pin and hoist
ring. The fit between the assembly, washers, and ring is very tight.
Warning! Replacing the hoist ring with other hardware may change the load capacity of
the product!
Clamp
attachment
bracket
Mounting
clamp
Hoist
pin
Hoist
ring
Safety
clip
Washer
(x2)

7
Setup
REM-RB200CM IP User Manual Rev. 1
Stacking
Stack video panels upon the REM-RB200CM IP when using with the Ground Support 2 Kit from Chauvet.
1. Insert alignment conicals into the alignment holes and allow magnets to connect.
2. Close the levers of the latches on the REM video panel.
3. To detach the rig bar from the REM video panel, reverse the previous steps.
Warning! The magnetic attachments are not load-bearing, and are intended for alignment
assistance only. Do not release the video panel until the hanging hardware has been fully
secured.
Vertical
alignment
conical (x8)
Latch
(x8)
Receiver (x6)
(For use with Ground Support 2 Kit)
TR16 screw jack
(10 included with
Ground Support 2 Kit)