Chauvet Professional ROGUEOUTCAST2HYBRID User manual

Model ID: ROGUEOUTCAST2HYBRID
User Manual

Rogue Outcast 2 Hybrid User Manual Rev. 1
Edition Notes
The Rogue Outcast 2 Hybrid User Manual includes a description, safety precautions, installation,
programming, operation and maintenance instructions for the Rogue Outcast 2 Hybrid as of the release
date of this edition.
Trademarks
Chauvet, Chauvet Professional, the Chauvet logo, Rogue, Outcast, and Rogue Outcast are registered
trademarks or trademarks of Chauvet & Sons, LLC (d/b/a Chauvet and Chauvet Lighting) in the United
States and other countries. Other company and product names and logos referred to herein may be
trademarks of their respective companies.
Copyright Notice
The works of authorship contained in this manual, including, but not limited to, all design, text and images
are owned by Chauvet.
© Copyright 2022 Chauvet & Sons, LLC. All rights reserved.
Electronically published by Chauvet in the United States of America.
Manual Use
Chauvet authorizes its customers to download and print this manual for professional information purposes
only. Chauvet expressly prohibits the usage, copy, storage, distribution, modification, or printing of this
manual or its content for any other purpose without written consent from Chauvet.
Document Printing
For best results, print this document in color, on letter size paper (8.5 x 11 in), double-sided. If using A4
paper (210 x 297 mm), configure the printer to scale the content accordingly.
Intended Audience
Any person installing, operating, and/or maintaining this product should completely read through the guide
that shipped with the product, as well as this manual, before installing, operating, or maintaining this
product.
Disclaimer
Chauvet believes that the information contained in this manual is accurate in all respects. However,
Chauvet assumes no responsibility and specifically disclaims any and all liability to any party for any loss,
damage or disruption caused by any errors or omissions in this document, whether such errors or
omissions result from negligence, accident or any other cause. Chauvet reserves the right to revise the
content of this document without any obligation to notify any person or company of such revision, however,
Chauvet has no obligation to make, and does not commit to make, any such revisions. Download the latest
version from www.chauvetprofessional.com.
Document Revision
This Rogue Outcast 2 Hybrid User Manual is the 1st edition of this document. Go to
www.chauvetprofessional.com for the latest version.

Rogue Outcast 2 Hybrid User Manual Rev. 1
Table of Contents
i
TABLE OF CONTENTS
1. Before You Begin ....................................................................... 1
What Is Included ........................................................................................... 1
Claims ........................................................................................................... 1
Text Conventions .......................................................................................... 1
Symbols ........................................................................................................ 1
FCC Compliance........................................................................................... 1
Safety Notes.................................................................................................. 2
Personal Safety.................................................................................................. 2
Mounting and Rigging ........................................................................................ 2
Power and Wiring............................................................................................... 2
Operation ........................................................................................................... 3
2. Introduction ................................................................................ 4
Description .................................................................................................... 4
Features........................................................................................................ 4
Product Overview.......................................................................................... 4
Product Dimensions ...................................................................................... 5
3. Setup ........................................................................................... 6
AC Power...................................................................................................... 6
AC Plug .............................................................................................................. 6
Fuse Replacement ............................................................................................. 6
DMX Linking.................................................................................................. 6
Remote Device Management (RDM) ................................................................. 6
USB Software Update ................................................................................... 6
Mounting ....................................................................................................... 7
Orientation.......................................................................................................... 7
Rigging ............................................................................................................... 7
Procedure........................................................................................................... 7
Lamp Replacement....................................................................................... 8
Procedure........................................................................................................... 8
Increasing Lamp Lifespan .................................................................................. 9
4. Operation .................................................................................... 10
Control Panel Description ............................................................................. 10
Menu Map ..................................................................................................... 10
Configuration (DMX) ..................................................................................... 12
Control Personalities .......................................................................................... 12
Starting Address................................................................................................. 12
Control Channel Assignments and Values.................................................... 13
Gobo Wheels ..................................................................................................... 16
Configuration (Settings) ................................................................................ 17
Pan Reverse ...................................................................................................... 17
Tilt Reverse ........................................................................................................ 17
Screen Reverse ................................................................................................. 17
Pan Angle........................................................................................................... 17
Tilt Angle ............................................................................................................ 17
Black Out on Movement..................................................................................... 17
Lamp Settings .................................................................................................... 17

Table of Contents
Rogue Outcast 2 Hybrid User Manual Rev. 1
ii
Lamp On/Off ................................................................................................................... 17
Lamp State at Power On................................................................................................. 17
Off Via DMX .................................................................................................................... 18
On If DMX On ................................................................................................................. 18
Off If DMX Off ................................................................................................................. 18
Ignition Delay .................................................................................................................. 18
Low Power Delay ............................................................................................................ 18
Reset Lamp On Time...................................................................................................... 18
Maintenance Timer Interval................................................................................ 18
Reset Maintenance Timer .................................................................................. 18
Display Backlight Timer...................................................................................... 18
USB Update ....................................................................................................... 19
Reset Function ................................................................................................... 19
Factory Reset..................................................................................................... 19
Test Mode ..................................................................................................... 19
Auto Test............................................................................................................ 19
Manual Test ....................................................................................................... 19
System Information ....................................................................................... 19
Offset Mode (Zero Adjust)............................................................................. 19
Gobo Replacement ....................................................................................... 20
Procedure........................................................................................................... 20
Diagram .......................................................................................................................... 20
Torque Measurements.................................................................................. 21
Pressure Test Measurements ....................................................................... 21
5. Maintenance................................................................................ 22
Product Maintenance .................................................................................... 22
6. Technical Specifications ........................................................... 23
Returns............................................................................................ 24
Contact Us ...................................................................................... 25

Page 1 of 25
Rogue Outcast 2 Hybrid User Manual Rev. 1
Before You Begin
1. Before You Begin
What Is Included
Claims
Carefully unpack the product immediately and check the container to make sure all the parts are in the
package and are in good condition.
If the box or the contents (the product and included accessories) appear damaged from shipping, or show
signs of mishandling, notify the carrier immediately, not Chauvet. Failure to report damage to the carrier
immediately may invalidate your claim. In addition, keep the box and contents for inspection.
For other issues, such as missing components or parts, damage not related to shipping, or concealed
damage, file a claim with Chauvet within 7 days of delivery.
Text Conventions
Symbols
FCC Compliance
This device complies with Part 15 Part B of the FCC Rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause
undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void
the user's authority to operate the equipment.
• Rogue Outcast 2 Hybrid
• Seetronic Powerkon IP65 power cable
• 2 Omega brackets with mounting hardware
• Quick Reference Guide
Convention Meaning
1–512 A range of values
50/60 A set of values of which only one can be chosen
Settings A menu option not to be modified
<ENTER> A key to be pressed on the product’s control panel
Symbol Meaning
Critical installation, configuration, or operation information. Not following these
instructions may make the product not work, cause damage to the product, or cause
harm to the operator.
Important installation or configuration information. The product may not function correctly
if this information is not used.
Useful information.
Any reference to data or power connections in this manual assumes the use of Seetronic
IP rated cables.
The term “DMX” used throughout this manual refers to the USITT DMX512-A digital data
transmission protocol.

Page 2 of 25
Before You Begin
Rogue Outcast 2 Hybrid User Manual Rev. 1
Safety Notes
Read all the following safety notes before working with this product. These notes contain important
information about the installation, usage, and maintenance of this product.
Personal Safety
• The luminaire should be positioned so that prolonged staring into the luminaire at a distance closer
than 6.56 ft (2 m) is not expected.
• If the external flexible cable or cord of this luminaire is damaged, it shall be replaced by a special
cord or cord exclusively available from the manufacturer or his service agent.
• The light source contained in this luminaire shall only be replaced by the manufacturer or his service
agent or a similar qualified person.
• The luminaire is intended for professional use only.
• Always disconnect the product from the power source before cleaning or replacing the fuse.
• Always connect the product to a grounded circuit to avoid the risk of electrocution.
• Do not touch the product’s housing when operating because it may be very hot.
Mounting and Rigging
• Do not submerge this product (IP65). Temporary outdoor operation is fine.
• When using this product in an outdoor environment, use IP65 (or higher) rated power and data
cables. Secure unused power and data ports with attached IP65 covers.
• CAUTION: When transferring product from extreme temperature environments, (e.g., cold truck to
warm, humid ballroom) condensation may form on the internal electronics of the product. To avoid
causing a failure, allow product to fully acclimate to the surrounding environment before connecting
it to power.
• Not for permanent outdoor installation in locations with extreme environmental conditions. This
includes, but is not limited to:
• Exposure to a marine/saline environment (within 3 miles of a saltwater body of water).
• Locations where the normal high or low temperatures exceed the temperature ranges in this
manual.
• Locations that are prone to flooding or being buried in snow.
• Areas where the product will be subjected to extreme radiation or caustic substances.
• Mount this product in a location with adequate ventilation, at least 20 in (50 cm) from adjacent
surfaces.
• Make sure there are no flammable materials within 20 cm of this product while it is operating.
• When hanging this product, always secure to a fastening device using a safety cable.
• Never carry the product by the power cable.
Power and Wiring
• Make sure the power cable is not crimped or damaged.
• Always make sure you are connecting this product to the proper voltage in accordance with the
specifications in this manual or on the product’s specification label.
• To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely
disconnect the product from power via breaker or by unplugging it.
• Never connect this product to a dimmer pack or rheostat.
• Make sure to replace the fuse with another of the same type and rating.
• Never disconnect this product by pulling or tugging on the power cable.
This product contains no user-serviceable parts. Any reference to servicing in this User
Manual will only apply to properly trained, certified technicians. Do not open the housing
or attempt any repairs.
All applicable local codes and regulations apply to proper installation of this product.

Page 3 of 25
Rogue Outcast 2 Hybrid User Manual Rev. 1
Before You Begin
Operation
• Do not operate this product if there is damage on the housing, lenses, or cables. Have the damaged
parts replaced by an authorized technician at once.
• Do not cover the ventilation slots when operating to avoid internal overheating.
• The maximum ambient temperature is 113 °F (45 °C). Do not operate the product at higher
temperatures.
• The minimum startup temperature is -4°F (-20°C). Do not start the product at lower temperatures.
• The minimum ambient temperature is -22°F (-30°C). Do not operate the product at lower
temperatures.
• In the event of a serious operation problem, stop using this product immediately!
If your Chauvet product requires service, contact Chauvet Technical Support.

Page 4 of 25
Introduction
Rogue Outcast 2 Hybrid User Manual Rev. 1
2. Introduction
Description
The Rogue Outcast 2 Hybrid is an outdoor-ready, IP65 spot/beam/wash moving head ideal for small to
medium festivals and events. Powered by an intense 400W lamp, Rogue Outcast 2 Hybrid delivers a 6500
K output with tight beam angles of 0.9° to 20.7° in Beam Mode and a zoom range of 1.4° to 37.2° in Spot
Mode and 5.4° to 41.7° in Wash Mode for maximum visual impact. This feature-packed unit offers 1
rotating and 1 static gobo wheel, 2 individually controllable 6 and 8-facet layerable prisms, and a 14-hue
color wheel for solid and split colors. Control is over DMX and RDM.
Features
• Fully featured, IP65 rated, high powered Spot/Beam/Wash combination fixture with an Ushio 400
W, 6500 K with 6,000 hour life expectancy lamp, 2 gobo wheels, 2 layerable prisms, large zoom
range, and lightweight aluminum/magnesium housing
• Individually controllable and layerable 5 facet linear and 8 facet round prisms for maximizing visual
impact
• Frost and beam flattening options for even light distribution
• Tight 0.9° narrow beam angle for focused air effects
• Linear zoom of 0.9° to 20.7° in beam mode, 1.4° to 37.2°in spot mode and 5.4° to 41.7°in wash
mode for coverage in any application
• 9 rotating and 13 static gobos for massive visual effect
• DMX and RDM protocol control
• True 1 compatible power input
• Easy to read OLED display with simple, effective menu options
• Simple and complex DMX channel profiles for programming versatility
• USB-C port for uploading software
Product Overview
Menu
buttons
LCD
display
DMX
in/out
Carry
handle
Power
in
Fuse
holder
USB C
port
Condensation
valve (x3)

Page 5 of 25
Rogue Outcast 2 Hybrid User Manual Rev. 1
Introduction
Product Dimensions
15.24 in
387 mm
27.76 in
705 mm
18.98 in
482 mm
9.61 in
244 mm
14.41 in
366 mm
10.04 in
255 mm
4.41 in
112 mm

Page 6 of 25
Setup
Rogue Outcast 2 Hybrid User Manual Rev. 1
3. Setup
AC Power
The Rogue Outcast 2 Hybrid has an auto-ranging power supply and it can work with an input voltage range
of 100 to 240 VAC, 50/60 Hz.
To determine the product’s power requirements (circuit breaker, power outlet, and wiring), use the current
value listed on the label affixed to the product’s back panel, or refer to the product’s specifications chart.
The listed current rating indicates the product’s average current draw under normal conditions.
AC Plug
The Rogue Outcast 2 Hybrid comes with a power input cable terminated with a Seetronic Powerkon A
connector on one end and bare wire on the other end (U.S. market). Use the table below to wire a plug.
Fuse Replacement
1. Disconnect this product from the power outlet.
2. Using a flat-head screwdriver, unscrew the fuse holder cap from the housing.
3. Remove the blown fuse and replace with another fuse of the same type and rating (F 8 A, 250 V).
4. Screw the fuse holder cap back in place and reconnect power.
DMX Linking
The Rogue Outcast 2 Hybrid will work with a DMX controller using a 5-pin DMX serial connection. A DMX
Primer is available from www.chauvetprofessional.com.
Remote Device Management (RDM)
Remote Device Management, or RDM, is a standard for allowing DMX-enabled devices to communicate
bi-directionally along existing DMX cabling. Check the DMX controller’s User Manual or with the
manufacturer as not all DMX controllers have this capability. The Rogue Outcast 2 Hybrid supports RDM
protocol that allows feedback to make changes to menu map options.
USB Software Update
The Rogue Outcast 2 Hybrid allows for software update through USB using the built-in USB port. The
product's USB port supports up to 32GB capacity and only works with FAT32 file format. To update the
software using a USB flash drive, do the following:
1. Power on the product and plug the flash drive into the USB port.
2. Once the flash drive has been detected, the message “Upgrade Firmware” will be displayed. Press
<ENTER>. If a different message appears on the display, search for the updated software in the
Menu (Updated Firmware). A list of the updated software files will be displayed.
3. Select the file that needs to be uploaded. The message “Are you sure?” will be displayed. Press
<ENTER>.
4. If the selected file is correct, the update will be completed. Restart the product.
If the selected file is incorrect, the update will fail, and the display will go back to the main interface.
Repeat steps 1–3 using the correct file.
• Always connect the product to a protected circuit (a circuit breaker or fuse). Make sure
the product has an appropriate electrical ground to avoid the risk of electrocution or fire.
• To eliminate unnecessary wear and improve its lifespan, during periods of non-use
completely disconnect the product from power via breaker or by unplugging it.
Never connect the product to a rheostat (variable resistor) or dimmer circuit, even if the
rheostat or dimmer channel serves only as a 0 to 100% switch.
Connection Wire (U.S.) Wire (Europe) Screw Color
AC Live Black Brown Yellow or Brass
AC Neutral White Blue Silver
AC Ground Green/Yellow Green/Yellow Green
The upload may take up to 15 minutes to complete.
DO NOT power off the product during the upload process.

Page 7 of 25
Rogue Outcast 2 Hybrid User Manual Rev. 1
Setup
Mounting
Before mounting the product, read and follow the safety recommendations indicated in the Safety Notes.
For our Chauvet Professional line of mounting clamps, go to http://trusst.com/products/.
Orientation
Always mount this product in a safe position, making sure there is adequate room for ventilation,
configuration, and maintenance.
Rigging
Chauvet recommends using the following general guidelines when mounting this product.
• Before deciding on a location for the product, make sure there is easy access to the product for
maintenance and programming purposes.
• Make sure that the structure onto which you are mounting the product can support the product’s
weight. See the Technical Specifications for weight information.
• When mounting the product overhead, always use a safety cable. Mount the product securely to a
rigging point, whether an elevated platform or a truss.
• When rigging the product onto a truss, use a mounting clamp of appropriate weight capacity.
Procedure
The Rogue Outcast 2 Hybrid comes with 2 omega brackets to which mounting clamps (sold separately)
can be directly attached. Make sure the clamps are capable of supporting the weight of this product. Use at
least two mounting points per product. For the Chauvet Professional line of mounting clamps, go to http://
www.trusst.com/products.
Mounting Diagram
Safety cable
Mounting
clamp (x2)
Omega
bracket (x2)
Overhead mounting Surface mounting

Page 8 of 25
Setup
Rogue Outcast 2 Hybrid User Manual Rev. 1
Lamp Replacement
The Rogue Outcast 2 Hybrid is equipped with an USHIO NSL 400-W lamp. Follow the procedure below to
safely change the lamp.
Procedure
1. Turn the product off and disconnect it from power. Wait at least 15 minutes for the lamp to cool
down.
2. Loosen the 4 indicated screws with a 4 mm hex key until the bottom plate can be removed.
3. Carefully remove the bottom plate and heat sink and allow it to hang by the safety cord.
4. Remove the 2 wires connected to the lamp by the flag terminals.
5. Loosen the 2 indicated screws with a Phillips-head screwdriver.
Disconnect the product from power before performing this procedure.
Contact for
flag terminal
(x2)
Phillips-head
screws

Page 9 of 25
Rogue Outcast 2 Hybrid User Manual Rev. 1
Setup
6. Using the lamp base, push the lamp away from the loosened plate.
7. Slide the loosened plate away from the lamp.
8. Roll the lamp out and pull it away.
9. Reverse the steps above to install the new lamp. DO NOT touch the glass with bare hands!
Increasing Lamp Lifespan
• ALWAYS turn the lamp off by using the DMX controller or the product’s control panel, then wait at
least 5 minutes before switching off the product. This will keep the fans running to extract any
remaining heat from the product’s head.
• DO NOT power cycle the product unless it is necessary.
• DO NOT re-strike the lamp immediately after turning it off. It is recommended to wait 5 minutes
before trying to re-strike the lamp.
• DO NOT touch the lamp without wearing gloves to avoid leaving grease on the bulb or on the
contacts that could reduce the lamp’s life.
• ALWAYS change the lamp when it has reached its recommended lifespan to avoid the risk of lamp
explosion.
DO NOT turn the product on without a lamp!

Page 10 of 25
Operation
Rogue Outcast 2 Hybrid User Manual Rev. 1
4. Operation
Control Panel Description
Menu Map
Refer to the Rogue Outcast 2 Hybrid product page on www.chauvetprofessional.com for the latest menu map.
Button Function
<MENU> Exits from the current menu or function
<ENTER> Enables the currently displayed menu or sets the selected value into the selected function
<UP> Navigates upwards through the menu list or increases the value when in a function
<DOWN> Navigates downwards through the menu list or decreases the value when in a function
Main Level Programming Levels Description
Address 001–512 Sets the starting address
Run Mode
DMX 20CH Selects the DMX personality
25CH
Auto Test Auto test all functions
Manual Test
Pan
0–255 Manually control and test all settings
through the control panel
Pan Fine
Tilt
Tilt Fine
P/T Speed
Dimmer
Dimmer Fine
Shutter
Color
Gobo2
Gobo
Gobo Rot
Prism1
Prism1 Rot
Prism2
Prism2 Rot
Frost1
Beam Diffraction
Focus
Focus Fine
Focus Auto
Zoom
Zoom Fine
Special Function
Setup
Pan Reverse NO Normal pan
YES Reversed pan
Tilt Reverse NO Normal tilt
YES Reversed tilt
Screen
Reverse
NO Normal screen display
YES Inverted screen display

Page 11 of 25
Rogue Outcast 2 Hybrid User Manual Rev. 1
Operation
Setup
(cont.)
Pan Angle
540 540° pan range
360 360° pan range
180 180° pan range
Tilt Angle
260 260° tilt range
180 180° tilt range
090 90° tilt range
BL.O.P/T Move NO Enable/disable blackout while panning/
tilting
YES
BL.O.
ColorMove
NO Enable/disable blackout while color
wheel is moving
YES
BL.O.
GoboMove
NO Enable/disable blackout while gobo
wheels are moving
YES
Lamp Settings
On/Off ON Turns lamp on/off
OFF
State/Power on ON Defines the status of lamp when
powering up product
OFF
Off Via DMX NO Turns off the unit via DMX controller
YES
On If DMX On NO Turns lamp on when DMX signal is
detected
YES
Off If DMX Off NO Turns lamp off when DMX signal is lost
YES
Ignition Delay 000–255 Sets the delay duration between
product power on and lamp power on
Low Power
Delay 000–255
Sets the delay duration when shutter is
closed and lamp enters lower power
state
Reset Lamp
Time
NO Leaves lamp time unchanged
YES Resets lamp timer to 0
Maintenance
Timer
Interval 010–250 Defines amount of hours between
maintenance
Remain Time RESET Shows maintenance timer. Select
RESET to reset.
NO
Backlight
Timer
30S Display turns off after 30 seconds
1M Display turns off after 1 minute
5M Display turns off after 5 minutes
ON Display stays on
USB Update NO Update firmware via USB C
YES
Reset
Function
Pan/Tilt
NO
YES
Reset individual functions or all
functions from start-up
Shutter/Prism
Color
Gobo
Zoom/ Frost/
Focus
All
Factory
Settings
NO Reset to factory default settings
YES
Main Level Programming Levels Description

Page 12 of 25
Operation
Rogue Outcast 2 Hybrid User Manual Rev. 1
Configuration (DMX)
Use control configurations to operate the product with a DMX controller.
Control Personalities
To set the control personality:
1. Go to the Run Mode main level.
2. Select the DMX option.
3. Select the desired personality from 20CH or 25CH.
Starting Address
Each product will respond to a unique starting address from the controller. All products with the same
starting address will respond in unison. To set the starting address:
1. Go to the Address main level.
2. Select the starting address (001–512).
• The highest recommended starting address for 20CH is 493.
• The highest recommended starting address for 25CH is 48.
Sys Info
Ver V_ Shows firmware version
Running Mode _ _ _ Shows current running mode
DMX Address _ _ _ Shows current DMX address
Temperature _ _ _ Shows the product temperature in °C
Lamp On Time _ _ _ _ _ Shows lamp on time
Remaining
Time _ _ _ _ _ Shows lamp maintenance time
Fan1–4 _ _ _ _ _ Shows speed of fans 1–4
Power _ _ _W Shows power consumption in watts
Orientation _ _ _ _ Shows current orientation
Fan5–10 _ _ _ _ _ Shows speed of fans 5–10
Base Fan1–2 _ _ _ _ _ Shows speed of base fans 1–2
BFAN1–5 _ _ _ _ _ Shows speed of BFAN 1–5
F-SP1 _ _ _ _ _ Shows F-SP1
•SeetheStarting Address section for the highest starting address you can select for each
personality.
• Make sure that the starting addresses on the various products do not overlap due to the new
personality setting.
Main Level Programming Levels Description

Page 13 of 25
Rogue Outcast 2 Hybrid User Manual Rev. 1
Operation
Control Channel Assignments and Values
20CH 25CH Function Value Percent/Setting
11Pan 000 255 0–100%
2 2 Fine pan 000 255 Fine control (16-bit)
33Tilt 000 255 0–100%
4 4 Fine tilt 000 255 Fine control (16-bit)
5 5 Pan/tilt speed 000 255 Fast to slow
6 6 Dimmer 000 255 0–100%
– 7 Fine dimmer 000 255 Fine control (16-bit)
7 8 Shutter
000 007 No function
008 015 Open
016 131 Synchronized strobe, slow to fast
132 167 Fast close, slow open, slow to fast
168 203 Slow close, fast open, slow to fast
204 239 Pulse strobe, slow to fast
240 250 Random strobe, slow to fast
251 255 Open
8 9 Color wheel
000 001 Open
002 005 Red
006 009 Orange
010 013 Cyan
014 017 Light green
018 021 Light yellow
022 025 Green
026 029 Magenta
030 033 Dark blue
034 037 Dark yellow
038 041 Blue
042 045 CTO 5600K
046 049 CTO 6500K
050 059 UV
060 187 Color wheel indexing
188 219 Color scroll, fast to slow
220 223 Stop
224 255 Reverse color scroll, slow to fast

Page 14 of 25
Operation
Rogue Outcast 2 Hybrid User Manual Rev. 1
910
Gobo wheel 1
(see Gobo Wheels)
001 003 Open
004 006 Gobo 1
007 009 Gobo 2
010 012 Gobo 3
013 015 Gobo 4
016 018 Gobo 5
019 021 Gobo 6
022 024 Gobo 7
025 027 Gobo 8
028 030 Gobo 9
031 033 Gobo 10
034 036 Gobo 11
037 039 Gobo 12
040 042 Gobo 13
043 045 Gobo 14
046 048 Gobo 15
049 055 Gobo 16
056 059 Open
060 063 Gobo 1 shaking, slow to fast
064 067 Gobo 2 shaking, slow to fast
068 071 Gobo 3 shaking, slow to fast
072 075 Gobo 4 shaking, slow to fast
076 079 Gobo 5 shaking, slow to fast
080 083 Gobo 6 shaking, slow to fast
084 087 Gobo 7 shaking, slow to fast
088 091 Gobo 8 shaking, slow to fast
092 095 Gobo 9 shaking, slow to fast
096 099 Gobo 10 shaking, slow to fast
100 103 Gobo 11 shaking, slow to fast
104 107 Gobo 12 shaking, slow to fast
108 111 Gobo 13 shaking, slow to fast
112 115 Gobo 14 shaking, slow to fast
116 119 Gobo 15 shaking, slow to fast
120 123 Gobo 16 shaking, slow to fast
124 127 Open
128 189 Gobo scroll, fast to slow
190 193 Stop
194 255 Reverse gobo scroll, slow to fast
20CH 25CH Function Value Percent/Setting

Page 15 of 25
Rogue Outcast 2 Hybrid User Manual Rev. 1
Operation
10 11 Gobo wheel 2
(see Gobo Wheels)
000 Open
001 005 Open (aperture sets to Spot mode)
006 011 Gobo 1
012 017 Gobo 2
018 023 Gobo 3
024 029 Gobo 4
030 035 Gobo 5
036 041 Gobo 6
042 047 Gobo 7
048 053 Gobo 8
054 063 Gobo 9
064 069 Gobo 1 shaking, slow to fast
070 075 Gobo 2 shaking, slow to fast
076 081 Gobo 3 shaking, slow to fast
082 087 Gobo 4 shaking, slow to fast
088 093 Gobo 5 shaking, slow to fast
094 099 Gobo 6 shaking, slow to fast
100 105 Gobo 7 shaking, slow to fast
106 111 Gobo 8 shaking, slow to fast
112 117 Gobo 9 shaking, slow to fast
118 127 Open (aperture set to Spot mode)
128 191 Gobo scroll, fast to slow
192 255 Reverse gobo scroll, slow to fast
11 12 Gobo wheel 2 rotate
000 063 Gobo index
064 145 Rotation, fast to slow
146 149 Stop
150 231 Reverse rotation, slow to fast
232 255 Alternating rotation, short to long
– 13 Fine gobo rotation 000 255 Fine control (16-bit)
12 14 Prism 1 000 004 No function
005 255 Prism insert
13 15 Prism 1 rotate
000 127 Prism index
128 189 Rotation, fast to slow
190 193 Stop
194 255 Reverse rotation, slow to fast
14 16 Prism 2 000 004 No function
005 255 Prism insert
15 17 Prism 2 rotate
000 127 Prism index
128 189 Rotation, fast to slow
190 193 Stop
194 255 Reverse rotation, slow to fast
16 18 Frost 000 004 No function
005 255 0–100%
17 19 Beam diffraction 000 003 No function
004 255 On
18 20 Focus 000 255 0–100%
– 21 Fine focus 000 255 Fine control (16-bit)
20CH 25CH Function Value Percent/Setting

Page 16 of 25
Operation
Rogue Outcast 2 Hybrid User Manual Rev. 1
Gobo Wheels
–22Autofocus 000 010 No function
011 255 Auto detect distance
19 23 Zoom 000 255 0–100%
– 24 Zoom fine 000 255 Fine control (16-bit)
20 25 Control
(3 second hold)
000 069 No function
070 079 Blackout during pan/tilt
080 089 Disable pan/tilt blackout
090 099 Blackout while color wheel is moving
100 109 Disable color wheel blackout
110 119 Blackout while gobo wheels are moving
120 129 Disable gobo wheel blackout
130 139 Lamp on
140 149 Pan/tilt reset
150 159 Color wheel reset
160 169 Gobo wheel reset
170 179 Shutter/prism reset
180 189 No function
190 199 Frost/focus/zoom reset
200 209 All reset
210 219 Blackout all function during pan/tilt
220 229 Disable blackout all function during pan/tilt
230 239 Lamp off
240 255 No function
20CH 25CH Function Value Percent/Setting
OPEN 1
2
3
4
5
6
7
89
10
11
12
13
14
15
16
Gobo wheel 1 Gobo wheel 2
IMAGE
16 mm
12 mm
Gobo 2
dimensions