Chauvet Ovation H-105WW User manual

User Manual

Edition Notes
Ovation™ H-105WW User Manual Rev. 1
Edition
Notes
The Ovation™ H-105WW User Manual Rev. 1 covers the description, safety precautions,
installation, programming, operation, and maintenance of the Ovation™ H-105WW. Chauvet
released this edition of the Ovation™ H-105WW User Manual in February 2015.
Trademarks
CHAUVET® is a registered trademark of CHAUVET & Sons Inc. (d/b/a CHAUVET® or
Chauvet). The CHAUVET® logo in its entirety including the CHAUVET® name and the dot
ted
triangle, and all other trademarks in this manual pertaining to services, products, or marketing
statements (example: It’s Green Thinking™) are owned or licensed by Chauvet
. Any other
product names, logos, brands, company names, and other trademarks fe
atured or referred to
within this document are the property of their respective trademark holders.
Copyright Notice
Chauvet owns the content of this User Manual in its entirety, including but not limited to
pictures, logos, trademarks, and resources.
© Copyright 2015 Chauvet. All rights reserved.
Electronically published by Chauvet in the United States of America.
Manual Use
Chauvet authorizes its customers to download and print this manual for professional information
purposes only. Chauvet expressly prohibits the usage, copy, storage, distribution, modification,
or printing of this manual or its content for any other purpose without written consent from
Chauvet.
Document
Printing
For better results, print this document in color, on letter size paper (8.5 x 11 in), double-sided. If
using A4 paper (210 x 297 mm), configure your printer to scale the content accordingly.
Intended
Audience
Any person in charge of installing, operating, and/or maintaining this product should completely
read through the guide that shipped with the product, as well as this manual, before installing,
operating, or maintaining this product.
Disclaimer
Chauvet believes that the information contained in this manual is accurate in all respects.
However, Chauvet assumes no responsibility for any errors or omissions in this document.
Chauvet reserves the right to revise and make changes to the content of this document without
obligation that Chauvet notify any person or company of such revision or changes. This does
not in any way constitute a commitment by Chauvet to make such changes. Chauvet may issue
a revision of this manual or a new edition to incorporate such changes.
Document
Revision
The Ovation™ H-105WW User Manual Rev. 1 is the first edition of this manual. Go to
www.chauvetprofessional.com for the latest version.
Author
Date
Editor
Date
D. Couppe
2/17/15
A. Leon
2/18/15

Table of Contents
Ovation™ H-105WW User Manual Rev. 1 -i-
Table of Contents
1. Before You Begin......................................................................................................................................1
What Is Included...........................................................................................................................................................1
Claims..........................................................................................................................................................................................1
Manual Conventions ....................................................................................................................................................................1
Symbols.......................................................................................................................................................................................1
Product At A Glance .....................................................................................................................................................2
Safety Notes .................................................................................................................................................................2
Personal Safety............................................................................................................................................................................2
Mounting And Rigging..................................................................................................................................................................2
Power And Wiring ........................................................................................................................................................................2
Operation.....................................................................................................................................................................................2
Expected LED Lifespan................................................................................................................................................2
2. Introduction...............................................................................................................................................3
Description....................................................................................................................................................................3
Features........................................................................................................................................................................3
Overview.......................................................................................................................................................................4
Dimensions...................................................................................................................................................................5
3. Setup..........................................................................................................................................................6
AC Power......................................................................................................................................................................6
AC Plug........................................................................................................................................................................................6
Fuse Replacement.......................................................................................................................................................................6
DMX Linking..................................................................................................................................................................7
DMX Personalities........................................................................................................................................................................7
Remote Device Management (RDM) ...........................................................................................................................7
Master/Slave Connectivity............................................................................................................................................................7
Mounting.......................................................................................................................................................................8
Orientation ...................................................................................................................................................................................8
Rigging.........................................................................................................................................................................................8
Procedure ....................................................................................................................................................................................8
4. Operation...................................................................................................................................................9
Control Panel Description.............................................................................................................................................9
Control Options.............................................................................................................................................................9
Programming ................................................................................................................................................................9
Turning RDM On/Off.....................................................................................................................................................9
Menu Map...................................................................................................................................................................10
Configuration (Standalone).........................................................................................................................................11
Automatic Programs...................................................................................................................................................................11
Manual Static Mode ...................................................................................................................................................................11
Master/Slave..............................................................................................................................................................................11
Dimming Modes.........................................................................................................................................................................11
Backlight ....................................................................................................................................................................................11
Product Temperature.................................................................................................................................................................11
Software Information..................................................................................................................................................................12
Fixture Hours..............................................................................................................................................................................12
LED Frequency..........................................................................................................................................................................12
LED Test....................................................................................................................................................................................12
Emergency Mode.......................................................................................................................................................................12
Configuration (DMX)...................................................................................................................................................12
DMX Personality ........................................................................................................................................................................12
DMX Control...............................................................................................................................................................................12
DMX Values................................................................................................................................................................13
5. Technical Information.............................................................................................................................14

Table of Contents
-ii- Ovation™ H-105WW User Manual Rev. 1
Product Maintenance..................................................................................................................................................14
6. Technical Specifications.........................................................................................................................15
Returns .......................................................................................................................................................................16
Contact Us...................................................................................................................................................17

Before You Begin
Ovation™ H-105WW User Manual Rev. 1 -1-
1. BEFORE YOU BEGIN
What Is
Included
•Ovation™ H-105WW
•42°, 30°, and 15° Lenses
•Egg Crate
•Warranty Card
•Quick Reference Guide
Claims
Carefully unpack the product immediately and check the box to make sure all the parts are in
the package and are in good condition.
If the box or the contents (the product and included accessories) appear damaged from
shipping or show signs of mishandling, notify the carrier immediately, not Chauvet
. Failure to
report damage to the carrier immediately may invalidate your claim. In addition, keep the box
and contents for inspection.
For other issues, such as missing compon
ents or parts, damage not related to shipping, or
concealed damage, file a claim with Chauvet within 7 days of delivery.
Manual
Conventions
Convention Meaning
1–512
A range of values in the text
50/60
A set of mutually exclusive values in the text
<SET>
A button on the product’s control panel
Settings
A product function or a menu option
MENU>Settings
A sequence of menu options
1–10
A range of menu values from which to choose in a menu
Yes/No
A set of two mutually exclusive menu options in a menu
ON
A unique value to be entered or selected in a menu
Symbols
Symbols
Meaning
Critical installation, configuration, or operation information. Failure to
comply with this information may cause the product not to work,
damage third-party equipment, or cause harm to the operator.
Important installation or configuration information. Failure to comply
with this information may keep the product from working.
Useful information.
The term “DMX” used throughout this manual refers to the USITT DMX512-A digital data
transmission protocol.

Before You Begin
-2- Ovation™ H-105WW User Manual Rev. 1
Product At A
Glance
Use on Dimmer
x
Auto Programs
P
Outdoor Use
x
Auto-Ranging Power
Supply
P
Master/Slave
P
Replaceable Fuse
P
DMX
P
User-Serviceable
x
Safety Notes
Read all the following Safety Notes before working with this product. These notes include
important information about the installation, usage, and maintenance of this product.
This product contains no user-serviceable parts. Any reference to servicing in this User
Manual will only apply to properly trained Chauvet certified technicians. Do not open the
housing or attempt any repairs.
All applicable local codes and regulations apply to proper installation of this product.
Personal Safety
•Avoid direct eye exposure to the light source while the product is on.
•Always disconnect this product from its power source before servicing.
•Always connect this product to a grounded circuit to avoid the risk of electrocution.
•Do not touch this product’s housing during operation because it may be very hot.
Mounting And
Rigging
•This product is for indoor use only! To prevent risk of fire or shock, do not expose this
product to rain or moisture. (IP20)
•CAUTION: When transferring product from extreme temperature environments, (e.g. cold
truck to warm humid ballroom) condensation may form on the internal electronics of the
product. To avoid causing a failure, allow product to fully acclimate to the surrounding
environment before connecting it to power.
•Mount this product in a location with adequate ventilation, at least 20 in (50 cm) from
adjacent surfaces.
•This product weighs 14.2 lb (6.5 kg). Always ask for help when mounting this product to
avoid personal injuries or damage to the product.
•Make sure there are no flammable materials close to this product while it is operating.
•When hanging this product, always secure to a fastening device using a safety cable.
Power And
Wiring
•Always make sure you are connecting this product to the proper voltage in accordance with
the specifications in this manual or on the product’s specification label.
•To eliminate unnecessary wear and improve its lifespan, during periods of non-use
completely disconnect the product from power via breaker or by unplugging it.
•Never connect this product to a dimmer pack or rheostat.
•
Never disconnect this product by pulling or tugging on the power cable.
Operation
•Do not operate this product if you see damage on the housing, lenses, or cables. Have the
damaged parts replaced by an authorized technician at once.
•Do not cover the ventilation slots when operating to avoid internal overheating.
•The maximum ambient temperature is 113 °F (45 °C). Do not operate this product at a
higher temperature.
•In case of a serious operating problem, stop using this product immediately!
In the unlikely event that your Chauvet product may require service, contact Chauvet
Technical Support.
Expected LED
Lifespan
LEDs gradually decline in brightness over time, mostly because of heat. Packaged in clusters,
LEDs exhibit higher operating temperatures than in ideal, single-
LED conditions. For this
reason, using clustered LEDs at their fullest intensity significantly reduces the LEDs’ lifespan.
Under normal conditions, this lifespan can be 40,000 to 50,000 hours. If extending this lifespan
is vital, lower the operating temperature by improving the ventilation around the product and
reducing the ambient temperature to an optimal operating range. In addition, limiting the overall
projection intensity may also help to extend the LEDs’ lifespan.

Introduction
Ovation™ H-105WW User Manual Rev. 1 -3-
2. INTRODUCTION
Description
The Ovation™ H-105WW is a silent LED house light that features COB LED technology for flat,
and even, fields of light. It comes standard with interchangeable lenses for adjustments for
differing heights, 5-pin DMX and install terminals for permanent and temporary installations. The
product also features 16-bit dimming response,
remote device management, and has adjustable
PWM (pulse width modulation) to avoid flickering in filmed environments.
Features
•1, 2, or 4-channel Warm White LED wash product
•Operating modes:
•1-channel: dimmer
•2-channel: 16-bit dimmer
•4-channel: 16-bit dimmer, strobe, strobe speed
•COB LED technology delivers even, flattering, warm white light
•Interchangeable lens plates to adapt to different mounting heights
•5-pin XLR and terminal blocks for DMX connections
•Use included yoke for pipe mounting, or suspend from integrated safety loop
•Convection cooled for completely silent operation
•16-bit dimming for ultra-smooth fades
•RDM (Remote Device Management) for added programming flexibility
•Adjustable PWM (Pulse Width Modulation) to avoid flickering on camera

Introduction
-4- Ovation™ H-105WW User Manual Rev. 1
Overview
Rear View
Front View
Side View
DMX
In/Out
Safety Loop
Yoke
Fuse
Power Input
Control
Panel
LED
Yoke Adjustment
Top View

Introduction
Ovation™ H-105WW User Manual Rev. 1 -5-
Dimensions
177.2 in
4500 mm
8.54 in
217 mm
17.36 in
441 mm
8.82 in
224 mm
14.70 in
372 mm
6.38 in
162 mm
Top View
8.7 in
221 mm
Side View

Setup
-6- Ovation™ H-105WW User Manual Rev. 1
3. SETUP
AC Power
Each Ovation™ H-105WW has an auto-ranging power supply that works with an input voltage
range of 100 to
240 VAC, 50/60 Hz. To determine the power requirements for each
Ovation™ H-105WW
, refer to the label affixed to the product. You can also refer to the
Technical Specifications chart in this manual.
The listed current rating indicates the maximum current draw during normal operation. For more
information, you may download Sizing Circuit Breakers from the Chauvet website
:
http://www.chauvetlighting.com/download/.
•Always connect this product to a protected circuit with an appropriate electrical
ground to avoid the risk of electrocution or fire.
•To eliminate unnecessary wear and improve its lifespan, during periods of non-use
completely disconnect the product from power via breaker or by unplugging it.
Never connect this product to a rheostat (variable resistor) or dimmer circuit, even if the
rheostat or dimmer channel serves only as a 0 to 100% switch.
AC Plug
The Ovation™ H-105WW comes with a bare ended power input cord. The product side of this
power cord enters the product through a strain reliever (rubber boot) and it cannot be
disconnected from the product. Use the table below to wire the plug to the power cord.
Connection
Wire (U.S.)
Wire (Europe)
Screw Color
AC Live
Black
Brown
Yellow or Brass
AC Neutral
White
Blue
Silver
AC Ground
Green/Yellow
Green/Yellow
Green
The Ovation™ H-105WW includes a 15 ft., (4.5 m) cable attached to allow for pendent
mounting.
Fuse
Replacement
1. Disconnect this product from the power outlet.
2. Using a flat-head screwdriver, unscrew the fuse holder cap from the housing.
3. Remove the blown fuse and replace with another fuse of the same type and rating
(T 2 A, 250 V).
4. Screw the fuse holder cap back in place and reconnect power.
Make sure to disconnect the product’s power cord before replacing a blown fuse. Always
replace the blown fuse with another of the same type and rating.

Setup
Ovation™ H-105WW User Manual Rev. 1 -7-
DMX Linking
You can link the Ovation™ H-105WW to a DMX controller using a 5-pin DMX connection. If
using other DMX-compatible products with the Ovation™ H-105WW
, you can control each
individually with a single DMX controller.
DMX
Personalities
The Ovation™ H-105WW uses a 5-pin DMX data connection for the 1-, 2- and 4-channel DMX
personalities.
•Refer to the Introduction chapter for a brief description of each DMX personality.
•Refer to the Operation chapter to learn how to configure the Ovation™ H-105WW to work in
these personalities.
•The DMX Values section provides you with detailed information regarding the DMX
personalities.
If you are not familiar with or need more information about DMX standards, Master/Slave
connectivity, or the DMX cables needed to link this product to a DMX controller,
download the DMX Primer from the Chauvet website:
http://www.chauvetlighting.com/download/.
Remote Device
Management
(RDM)
Remote Device Management, or RDM, is a standard for allowing DMX-enabled devices to
communicate bi-directionally along existing DMX cabling. Check the DMX controller’
s User
Manual or with the manufacturer as not all DM
X controllers have this capability. The
Ovation™ H-
105WW supports RDM protocol that allows feedback to make changes to
DMX Address and DMX Channel menu map options as well as allowing you to monitor the
Temperature. Please refer to RDM On/Off to enable/disable this function.
Master/Slave
Connectivity
The Master/Slave mode allows a Ovation™ H-105WW (the master) to control one or more
Ovation™ H-105WWs (the slaves) without a DMX controller. One Ovation™ H-105WW
becomes the master when running an auto program, or by being in a Static mode.
You must configure each slave’s control panel to operate in Slave mode. During Master/Slave
operation, the slaves will operate in unison with the master.
DO NOT connect a DMX controller
to products operating in Master/Slave mode. The DMX
controller signals may interfere with the signals from the master.
The Operation section of this manual provides detailed instructions on how to configure
the master and slaves.
If you are not familiar with or need more information about DMX standards, or the DMX
cables needed to link this product to a DMX controller, download the DMX Primer from
the Chauvet website: http://www.chauvetlighting.com/download/.

Setup
-8- Ovation™ H-105WW User Manual Rev. 1
Mounting
Before mounting this product, read and follow the Safety Notes. For our CHAUVET®
Professional line of mounting clamps, go to http://trusst.com/products/.
Orientation
Always mount this product in a safe position and make sure there is adequate room for
ventilation, configuration, and maintenance.
Rigging
Chauvet recommends using the following general guidelines when mounting this product.
•When selecting an installation location, consider easy access to this product for operation,
programming adjustments, and routine maintenance.
•Make sure to mount this product away from any flammable material as indicated in the
Safety Notes.
•Never mount in places where rain, high humidity, extreme temperature changes, or
restricted ventilation may affect the product.
•If hanging this product, make sure that the mounting location can support the product’s
weight. See the Technical Specifications for the weight-bearing requirements of this
product.
•When hanging this product, always secure to a fastening device using a safety cable. For
our CHAUVET® Professional line of safety cables, go to http://trusst.com/products/.
Procedure
The Ovation™ H-105WW comes with a yoke to which you can attach a mounting clamp for
hanging or you may attach a cable to the safety loop located directly center of the back panel
for pendent mounting. You must supply your own mounting clamp or cable
. Make sure the
clamps are capable of supporting the weight of this product. Use at least one mounting point per
product. For our Chauvet line of mounting clamps, go to http://trusst.com/products/.
Mounting Diagram
Pendent Mounting
Overhead Mounting
Safety Loop
Mounting
Clamp
Safety Cable

Operation
Ovation™ H-105WW User Manual Rev. 1 -9-
4. OPERATION
Control Panel
Description
Button
Function
<MENU>
Exits from the current menu or function
<ENTER>
Enables the currently displayed menu or sets the currently selected
value in to the current function
<UP>
Navigates upward through the menu list or increases the numeric
value when in a function
<DOWN>
Navigates downward through the menu list or decreases the numeric
value when in a function
Control
Options
You can set the Ovation™ H-105WW starting address in the 001–512 DMX range. This enables
control of up to 128 products in the 4-channel 4 Ch personality.
Programming
Refer to the Menu Map to understand the menu options. The menu map shows the main level
and a variable number of programming levels for each option.
•To go to the desired main level, press <MENU> repeatedly until the option shows on the
display. Press <ENTER> to select. This will take you to the first programming level for that
option.
•To select an option or value within the current programming level, press <UP> or <DOWN>
until the option shows on the display. Press <ENTER> to select. In this case, if there is
another programming level, you will see that first option, or you will see the selected value.
•Press <MENU> repeatedly to exit to the previous main level.
Turning RDM
On/Off
The Ovation™ H-105WW RDM protocol allows feedback to make changes to the DMX
Address and the DMX Channel
menu map options as well as allowing you to monitor the
Temperature from your RDM compatible DMX console.
1. Go to the RDM Function main level.
2. Select On or Off.

Operation
-10- Ovation™ H-105WW User Manual Rev. 1
Menu Map
Main Level Programming Levels Description
Auto Show Auto 0–3 Speed 0–100
Selects automatic programs and auto program
speed
Static
Dimmer
0–255
Controls intensity
Strobe
0–255
Controls strobe rate
Dimmer Mode
Off
No dimmer
Dimmer 1–3
Dimming curves Dimmer 1 (fast) to
Dimmer 3 (slow)
Back Light
10S
Turns off display backlight after 10 sec of
inactivity
20S
Turns off display backlight after 20 sec of
inactivity
30S
Turns off display backlight after 30 sec of
inactivity
On
Display backlight always on
Information
Auto
Test
Turns on all LEDs in sequence for testing
Fixture Hours
Shows total product hours
Version
Shows installed software version
Shows which mode is actively running in the product
DMX Address 001–512
Selects DMX address (highest channel
restricted to personality chosen)
DMX Channel
1 Ch
1-channel: dimmer
2 Ch
2-channel: 16-bit dimmer
4 Ch
4-channel: 16-bit dimmer, strobe, strobe speed
Master/Slave Mode
Master
DMX mode (Master)
Slave
Slave mode
Temperature
XX° C
Shows product’s temperature (°C)
LED Frequency
600Hz
Selects the PWM output frequency
1200Hz
2000Hz
4000Hz
25Khz
Emergency Mode
Off
No action is taken when DMX signal is lost
On
Turns product on when DMX signal is lost
RDM Function
Off
Activates/deactivates the Remote Device
Management option
On

Operation
Ovation™ H-105WW User Manual Rev. 1 -11-
Configuration
(Standalone)
Use standalone configuration to operate the product without a DMX controller.
Automatic
Programs
Automatic programs allow for dynamic mixing without a DMX controller.
1. Go to the Auto Show main level.
2. Select the desired automatic (Auto 0–3) program.
3. Go to the Speed programming level.
4. Select the desired speed 0–100.
You cannot edit any of the auto programs (Auto 0–3).
Manual Static
Mode
The Manual Static mode allows for manual control of intensity and strobe rate without a DMX
controller.
1. Go to the Static main level.
2. Select the Dimmer programming level.
3. Select the desired intensity value 0–255 (0–100%).
4. Go to the Strobe programming option.
5. Select the desired Strobe rate value 0–255 (0–25 Hz).
Master/Slave
The Master/Slave mode allows a group of Ovation™ H-105WWs (the slaves) to simultaneously
duplicate the output of another Ovation™ H-105WW (the master) without a DMX controller.
1. Set each of the slaves:
a. Go to the Master/Slave Mode main level.
b. Select Slave.
2. Set the master:
a. Go to the Master/Slave Mode main level.
b. Select Master.
c. Select an automatic program as explained in Automatic Programs, or a static mix as
explained in Manual Static Mode.
•The master is the one that runs a program whether in Automatic Programs or Manual
Static Mode.
•Do not connect a DMX controller to the products configured for Master/Slave
operation. The DMX controller may interfere with signals from the master.
•The master should be the first product in the daisy chain.
Dimming Modes
This setting provides three different options to simulate the dimming curve of an incandescent
lighting product.
1. Go to the Dimmer Mode main level.
2. Select a dimmer curve (OFF, Dimmer 1, Dimmer 2, or Dimmer 3).
OFF:
The output is proportional (linear) to the dimmer.
DIM 1–3:
The output follows the dimmer based on the corresponding dimmer curve,
Dimmer 1 being the fastest and Dimmer 3 the slowest.
Backlight
This setting allows you to set the amount of time the backlight on the
Ovation™ H-105WW’s display stays on after the last button is pressed on the control panel.
1. Go to the Back Lite main level.
2. Select On (remains on), 10S (10 seconds), 20S (20 seconds), or 30S (30 seconds).
Product
Temperature
This option shows the temperature (°C) of the Ovation™ H-105WW.
•Go to the
Temp
main level.

Operation
-12- Ovation™ H-105WW User Manual Rev. 1
Software
Information
This option shows what version of software the Ovation™ H-105WW is running.
1. Go to the Information main level.
2. Select Version and the version number will show on the display.
Fixture Hours
This option shows the total amount of hours the Ovation™ H-105WW has been turned on.
1. Go to the Information main level.
2. Select Fixture Hours and the total number of hours will show on the display.
LED Frequency
This option changes the Pulse Width Modulation (PWM) frequency of the LEDs on the
Ovation™ H-105WW.
1. Go to the LED Frequency main level.
2. Select PWM Frequency (600Hz, 1200Hz,2000Hz,4000Hz, or 25Khz).
LED Test
This option runs a check of the LEDs on the Ovation™ H-105WW by turning on all the LEDs in
sequence.
1. Go to the Information main level.
2. Go to the Auto programming level.
3. Go to the Test programming level.
Emergency Mode
This feature can be set to turn on the Ovation™ H-105WW in the event DMX signal is lost.
1. Go to the Emergency Mode main level.
2. Select On or Off.
Configuration
(DMX)
Use DMX configurations to operate the product with a DMX controller.
DMX Personality
This setting allows you to choose a particular DMX personality.
1. Go to the DMX Channel main level.
2. Select the desired personality (1 Ch, 2 Ch or 4 Ch).
•See the DMX Values section for the highest starting address you can select for each
personality.
•Make sure that the starting addresses on the various products do not overlap due to
the new personality setting.
DMX Control
In this mode, each product will respond to a unique starting address from the DMX controller. All
products with the same starting address will respond in unison.
1. Select a DMX personality as shown in DMX Personality.
2. Go to the DMX Address main level.
3. Select the starting address (001–512).
The highest recommended starting address for each DMX mode is as follows:
DMX Personality DMX Address
1 Ch
512
2 Ch
511
4 Ch
509

Operation
Ovation™ H-105WW User Manual Rev. 1 -13-
DMX Values
1 Ch
Channel Function Value Percent/Setting
1
Dimmer
000ó255
0–100%
2 Ch
Channel Function Value Percent/Setting
1
Dimmer
000ó255
0–100%
2
Dimmer Fine
000ó255
Fine control (16-bit)
4 Ch
Channel
Function
Value
Percent/Setting
1
Dimmer
000ó255
0–100%
2
Dimmer Fine
000ó255
Fine control (16-bit)
3 Strobe Speed
000ó005
006
ó
255
No function
Strobe (slow to fast)
4 Strobe
000ó005
006ó042
043ó085
086ó128
129ó171
172ó214
215ó255
No function
Ramp up
Ramp down
Ramp up/ramp down
Random strobe
Lighting effect
Spike effect

Technical Information
-14- Ovation™ H-105WW User Manual Rev. 1
5. TECHNICAL INFORMATION
Product
Maintenance
To maintain optimum performance and minimize wear, you should clean this product frequently.
Usage and environment are contributing factors in determining the cleaning frequency.
As a rule, clean this product at least twice a month. Dust build-
up reduces light output
performance and can cause overheating. This can
lead to reduced light source life and
increased mechanical wear.
To clean your product:
1. Unplug the product from power.
2. Wait until the product is at room temperature.
3. Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on the
external vents.
4. Clean all external surfaces with a mild solution of non-ammonia glass cleaner or isopropyl
alcohol.
5. Apply the solution directly to a soft, lint-free cotton cloth or a lens cleaning tissue.
6. Wipe any dirt or grime to the outside edges of the lens surface.
7. Gently polish the lens surfaces until they are free of haze and lint.
Always dry the external surfaces thoroughly and carefully after cleaning them.

Technical Specifications
Ovation™ H-105WW User Manual Rev. 1 -15-
6. TECHNICAL SPECIFICATIONS
Dimensions and
Weight Length Width Height Weight
17.4 in (441 mm)
8.7 in (221 mm)
6.4 in (162 mm)
14.2 lb (6.5 kg)
Note: Dimensions in inches rounded to the nearest decimal digit.
Power
Power Supply Type Range Voltage Selection
Switching (internal)
100–240 VAC, 50/60 Hz
Auto-ranging
Parameter 120 VAC, 60 Hz 230 VAC, 50 Hz
Consumption
109 W
110 W
Current
1 A
0.48 A
Fuse
T 2 A, 250 V
T 2 A, 250 V
Power I/O
U.S./Canada
Worldwide
Power input connector
Hard-wired
Hard-wired
Power output connector
Bare-wired
Bare-wired
Light Source
Type Power Lifespan
LED
100 W
50,000 hours
Color
Quantity
Current
Warm White
1
1.1 A
Photometrics
Parameter 15º Optics 30º Optics 42º Optics 60º Optics
Illuminance @ 5 m
1,725 lux
669 lux
473 lux
328 lux
Beam angle
17°
30°
35°
41°
Field angle
27°
49°
61°
74°
Thermal
Max. External Temperature Cooling System
113 °F (45 °C)
Convection
DMX
I/O Connectors Connector Type Channel Range
5-pin XLR
Sockets
1, 2 or 4
Ordering
Product Name
Item Code
UPC Number
Ovation™ H-105WW
03030913
781462212612

Technical Specifications
-16- Ovation™ H-105WW User Manual Rev. 1
Returns
You must send the product prepaid, in the original box, and with the original packing and
accessories. Chauvet will not issue call tags.
Call Chauvet and request a Return Merchandise Authorization (RMA) number before shipping
the product. Be prepared to provide the model number, serial number, and a brief description of
the cause(s) for the return.
Clearly label the package with an RMA number. Chauvet
will refuse any product returned
without an RMA number.
DO NOT write the RMA number directly on the box. Instead, write it on a properly affixed
label.
Once you have received the RMA number, include the following information on a piece of paper
inside the box:
•Your name
•Your address
•Your phone number
•The RMA number
•A brief description of the problem(s)
Be sure to pack the product properly. Any shipping damage resulting from inadequate
packaging will be the customer’s responsibility. FedEx packing or double-boxing is
recommended.
Chauvet reserves the right to use its own discretion to repair or replace returned
product(s).