Chauvet COLORado Range IP User manual

User Manual

Edition Notes
COLORado™ Range IP User Manual Rev. 06
Edition Notes
The COLORado™ Range IP User Manual Rev. 06 covers the description, safety
precautions, installation, programming, operation, and maintenance of the
COLORado™ Range IP. CHAUVET® released this edition of the COLORado™
Range IP User Manual in September 2011.
Trademarks
CHAUVET® is a registered trademark of CHAUVET & Sons Inc. (d/b/a CHAUVET®
or Chauvet). The CHAUVET® logo in its entirety including the Chauvet name and
the dotted triangle, and all other trademarks on this manual pertaining to services,
products, or marketing statements (example: It’s Green Thinking™) are owned or
licensed by CHAUVET®. Any other product names, logos, brands, company names,
and other trademarks featured or referred to within this document are the property of
their respective trademark holders.
Copyright Notice
CHAUVET® owns the content of this user manual in its entirety, including but not
limited to pictures, logos, trademarks, and resources.
© Copyright 2011 CHAUVET®. All rights reserved.
Electronically published by CHAUVET® in the United States of America.
Manual Usage
CHAUVET® authorizes its customers to download and print this manual for
professional information purposes only. CHAUVET® expressly prohibits the usage,
copy, storage, distribution, modification, or printing of this manual or its content for
any other purpose without its written consent.
Document Printing
For better results, print this document in color, on letter size paper (8.5 x 11 inches),
double sided. If using A4 paper (210 x 297 mm), configure your printer to scale the
content accordingly.
Intended Audience
Any person in charge of installing, operating, and/or maintaining this product should
read the guide that shipped with it as well as this manual in their entirety before
installing, operating, or maintaining this product.
Disclaimer
CHAUVET® believes that the information contained in this manual is accurate in all
respects. However, CHAUVET® assumes no responsibility for any error or
omissions in this document. CHAUVET® reserves the right to revise this document
and to make changes from time to time in the content hereof without obligation of
CHAUVET® to notify any person or company of such revision or changes. This
does not constitute in any way a commitment by CHAUVET® to make such
changes. CHAUVET® may issue a revision of this manual or a new edition of it to
incorporate such changes.
Document Revision
The COLORado™ Range IP User Manual Rev. 06 supersedes all previous versions
of this manual. Please discard any older versions of this manual you may have,
whether in printed or electronic format, and replace them with this version.
Author Date Editor Date
D. Couppe 9/14/11 B. Pillow 09/16/11

Table of Contents
COLORado™ Range IP User Manual Rev. 06 -i-
Table of Contents
1. Before You Begin ................................................................................................ 1
What Is Included .................................................................................................................1 
Unpacking Instructions........................................................................................................1 
Claims .........................................................................................................................................1
Typographic Conventions...................................................................................................1 
Icon Meaning.......................................................................................................................1 
Product at a Glance ............................................................................................................2 
Safety Notes........................................................................................................................2 
Personal Safety...........................................................................................................................2
Mounting and Rigging..................................................................................................................2
Power and Wiring........................................................................................................................2
Operation.....................................................................................................................................2
Expected LED Lifespan ......................................................................................................2 
2. Introduction ......................................................................................................... 3
Product Description.............................................................................................................3 
Features..............................................................................................................................3 
Options........................................................................................................................................3
Product Overview................................................................................................................4 
3. Setup .................................................................................................................... 5
AC Power............................................................................................................................5 
AC Plug .......................................................................................................................................5
DMX Linking........................................................................................................................6 
DMX Modes.................................................................................................................................6
Master/Slave Connectivity...........................................................................................................6
Mounting .............................................................................................................................7 
Orientation...................................................................................................................................7
Rigging........................................................................................................................................7
4. Operation ............................................................................................................. 8
Control Panel Description...................................................................................................8 
Control Options...................................................................................................................8 
Programming.......................................................................................................................8 
DMX Personality..........................................................................................................................8
DMX Control................................................................................................................................9
Static Color..................................................................................................................................9
Auto Programs.............................................................................................................................9
Edit Customs...............................................................................................................................9
Master/Slave..............................................................................................................................10
Color Settings............................................................................................................................10
Dimmer Curves..........................................................................................................................10
Control Panel Lock....................................................................................................................11
Program Upload ........................................................................................................................11
Reset.........................................................................................................................................12
Whites Setting ...........................................................................................................................12
White Calibration.......................................................................................................................12

Table of Contents
-ii- COLORado™ Range IP User Manual Rev. 06
TOUR Notes......................................................................................................................13 
Master Dimmer..........................................................................................................................13
Red, Green, Blue White, and Amber Color Selection...............................................................13
Color Macros.............................................................................................................................13
Strobe........................................................................................................................................13
Auto/Custom..............................................................................................................................13
Dimmer Speed...........................................................................................................................13
Menu Map.........................................................................................................................14 
DMX Values......................................................................................................................15 
TOUR........................................................................................................................................15
DMX Values (cont.)...........................................................................................................16 
BLOCK......................................................................................................................................16
ARC1.........................................................................................................................................16
AR1.D........................................................................................................................................16
ARC3.........................................................................................................................................16
AR3.D........................................................................................................................................16
AR3.S........................................................................................................................................16
HSV...........................................................................................................................................16
5. Technical Information....................................................................................... 17
Product Maintenance........................................................................................................17 
Troubleshooting Guide......................................................................................................18 
Returns Procedure............................................................................................................19 
Contact Us ........................................................................................................................19 
Technical Specifications ...................................................................................................20 

Before You Begin
COLORado™ Range IP User Manual Rev. 06 -1-
1. Before You Begin
What Is
Included
One COLORado™ Range IP
One Edison to Proprietary IP66 Power Input Adapter
One Male and Female 3-pin DMX to Proprietary IP66 Adapter
Two Omega Brackets
One Safety Cable
Warranty Card
Quick Reference Guide
Unpacking
Instructions
Immediately upon receiving this product, carefully unpack and check the container. Make
sure you have received all the parts indicated above and all the parts are in good condition.
Claims
If the container or the material inside the container (the product and included accessories)
appear damaged from shipping, or show signs of mishandling, notify the carrier
immediately, not CHAUVET®, upon receipt. Failure to do so in a timely manner may
invalidate your claim with the carrier. In addition, keep the container and all the packing
material for inspection.
For other issues such as missing components or parts, damage not related to shipping, or
concealed damage, file a claim with CHAUVET® within seven (7) days of receiving the
merchandise.
Typographic
Conventions
Convention Meaning
1~512 A range of values in the text
50/60 A set of mutually exclusive values in the text
“COLORado™ 1 UM” The name of another publication or manual
<SET> A button on the product’s control panel
Settings A product function or a menu option
MENU > Settings A sequence of menu options
1~10 A range of menu values from which to choose in a menu
Yes/No A set of two mutually exclusive menu options in a menu
ON A unique value to be entered or selected in a menu
Icon Meaning
Icon Meaning
This icon indicates critical installation, configuration, or operation
information. Failure to comply with this information may render the
product partially or completely inoperative, damage third-party
equipment, or cause harm to the user.
This icon indicates important installation or configuration
information. Failure to comply with this information may prevent
the product from functioning correctly.
This icon indicates useful, although non-critical information.
The term “DMX” used throughout this document refers to the USITT DMX512-A
transmission protocol.

Before You Begin
-2- COLORado™ Range IP User Manual Rev. 06
Product at a
Glance
Use on Dimmer

Auto Programs

Outdoor Use

Auto-ranging Power Supply

Sound Activated

Replaceable Fuse

DMX

User Serviceable

Master/Slave

Duty Cycle

Safety Notes
Read all these Safety Notes before starting to work with this product. These notes include
important safety information about the installation, usage, and maintenance of this
product.
There are no user serviceable parts in this product. Any reference to servicing you
find in this User Manual only applies to properly CHAUVET® certified technicians.
Do not open the housing or attempt any repairs unless you are one of them.
Please refer to all applicable local codes and regulations for the proper installation
of this product.
Personal Safety
Avoid direct eye exposure to the light source while the product is on.
Always disconnect this product from its power source before servicing.
Always connect this product to a grounded circuit to avoid the risk of electrocution.
Do not touch this product’s housing when operating because it may be very hot.
Mounting and
Rigging
This product is for outdoor use (IP66). However, do not submerge it.
This product weighs 89 lbs (40.3 kg). Always ask for help when mounting this product
to avoid personal injuries or damage to the unit.
Make sure there are no flammable materials close to this product while operating.
When hanging this product, always secure it to a fastening device using a safety cable
(included).
Do not carry this product from the head; always use the handles.
Power and Wiring
Always make sure that you are connecting this product to the proper voltage, as per
the specifications in this manual or on the product’s sticker.
Never connect this product to a dimmer pack or rheostat.
Never disconnect this product by pulling or tugging on the power cable.
Operation
Do not operate this product if you see damage on the housing, lenses, or cables. In
any of these cases, have the damaged parts replaced by an authorized technician at
once.
The maximum ambient temperature is 104° F (40° C). Do not operate this product at a
higher temperature.
In case of a serious operating problem, stop using this product immediately!
In the unlikely event that your CHAUVET® product may require service, contact
CHAUVET® Technical Support.
Expected LED
Lifespan
LEDs gradually decline in brightness over time, mostly because of heat. Packaged in
clusters, LEDs exhibit higher operating temperatures than in ideal, single LED conditions.
For this reason, using clustered LEDs at their fullest intensity significantly reduces the
LEDs’ lifespan. Under normal conditions, this lifespan can be of 40,000 to 50,000 hours. If
extending this lifespan is vital, lower the operational temperature by improving the
product’s ventilation and reducing the external temperature. In addition, limiting the overall
projection intensity may also help to extend the LEDs’ lifespan.

Introduction
COLORado™ Range IP User Manual Rev. 06 -3-
2. Introduction
Product
Description
The COLORado™ Range IP is a RGBWA high intensity wash product used to light a
variety of both indoor and outdoor applications. Consisting of a steel base and two
adjustable panels, the base contains the power supply and the control unit. The panels
attach to the steel arms that come from the base and are individually adjustable. The DMX
input and output cords use proprietary IP66 connectors and 3-pin XLR (male and female)
adapters. The power input cord also uses a proprietary IP66 connector and an Edison
adapter.
Features
3, 4, 5, 6, 7, 10, or 16-channel RGBWA LED wash light with 2 tiltable panels
Operating modes:
3-channel: HSV control
3-channel: RGB control
4-channel: RGB, dimmer
5-channel: RGBWA control
6-channel: RGBWA, dimmer
7-channel: RGBWA, dimmer, strobe
10-channel: RGBWA in block mode (controls each panel individually)
16-channel: RGBWA (block 1),RGBWA (block 2), dimmer, color macro, strobe,
auto/custom, auto speed, dimmer curve
RGBWA static color mixing with or without DMX control
Color temperature presets (3,200~10,000 K)
Built-in automated programs
Customizable programs
Recall auto/custom programs via DMX
Five distinct dimming curves
Ingress Protection: IP66
3-pin DMX input and output connectors
LED display with password protection
Die-cast aluminum, powder coated housing
Color calibration
Omega bracket mounting system
Options
15optical system CLENS1590
30º optical system CLENS3090
16.4 ft (5 m) IP66 power extension cable IP5POWER
16.4 ft (5 m) IP66 signal extension cable IP5SIG

Introduction
-4- COLORado™ Range IP User Manual Rev. 06
Product Overview
316stainless
steelglandnuts
Locking
adjustment
plate
Omegabrackets
Quick‐set
lockingpins
Omegabrackets

Setup
COLORado™ Range IP User Manual Rev. 06 -5-
3. Setup
AC Power
The COLORado™ Range IP has an auto-ranging power supply that works with an input
voltage range of 100~240 VAC, 50/60 Hz.
Make sure that you are connecting this product to the proper voltage, as per the
specifications in this manual or on the product’s sticker.
Always connect this product to a protected circuit with an appropriate electrical
ground to avoid the risk of electrocution or fire.
To determine the power requirements for the COLORado™ Range IP see the label affixed
to the side of the product. You can also refer to the Technical Specifications chart in the
Technical Information chapter of this manual.
The listed current rating indicates the maximum current draw during normal operation. For
more information, you may download the document Sizing the Circuit Breakers from the
CHAUVET® website: www.chauvetpro.com.
Never connect this product to a rheostat (variable resistor) or dimmer circuit, even if
the rheostat or dimmer channel serves only as a 0 to 100% switch.
AC Plug
The COLORado™ Range IP ships with an IP66 power input cord terminated with a
proprietary IP66 connector and an IP66 to Edison power cord adapter. If the power cord
adapter that came with your product has no plug or you need to change the Edison plug,
use the table below to wire the new plug.
Connection Wire (US) Wire (Europe) IP66 Pin Screw Color
AC Live Black Brown 1 Yellow or Brass
AC Neutral White Blue 2 Silver
AC Ground Green/Yellow Green/Yellow 3 Green

Setup
-6- COLORado™ Range IP User Manual Rev. 06
DMX Linking
You may link the COLORado™ Range IP to a DMX controller using a standard DMX serial
connection. If using other DMX compatible products with this product, you can control them
individually with a single DMX controller.
DMX Modes
The COLORado™ Range IP uses the standard DMX data connection for the Tour, ARC.1,
AR1.D, ARC.3, AR3.D, AR3.S, HSV, and Bloc DMX modes. You will find information
about these DMX modes in the Introduction chapter (brief description), the Operation
chapter (configuration details), and the DMX Values section (individual channel values).
Master/Slave
Connectivity
The Master/Slave mode enables a COLORado™ Range IP (the “master unit”) to control
one or more COLORado™ Range IPs (the “slave units”) without a DMX controller. The
COLORado™ Range IP becomes the master unit when running an auto or custom
program, or by being in STAT mode.
You must configure the slave units to operate in SLAV mode from their respective control
panels. The master unit links to the slave units using a regular DMX connection. During the
Master/Slave operation, the slave units will operate in unison with the master unit.
If you are not familiar with the DMX standard, master/slave connectivity, or if you need
information about the DMX cables needed to link this product to a DMX controller, you may
download the document DMX Primer from the CHAUVET® website: www.chauvetpro.com.
DO NOT connect a DMX controller to the unit’s operating in Master/Slave mode.
Otherwise, the signals from the DMX controller may interfere with the signals from
the master unit.
The Operation chapter of this manual provides detailed instructions on how to
configure the Master and Slave units.

Setup
COLORado™ Range IP User Manual Rev. 06 -7-
Mounting
Before mounting this product, read and follow the safety recommendations indicated in the
Safety Notes section (page 2 of this manual).
Orientation
Always mount this product in any safe position while making sure that there is adequate
room for ventilation, configuration, and maintenance.
Rigging
The COLORado™ Range IP consists of a heavy-duty rigid steel frame which enables this
product to be hung overhead (using included omega brackets) or placed on the floor.
CHAUVET® recommends following the general guidelines below when mounting this
product.
When selecting an installation location, consider ease of access to this product for
operation, programming adjustments, and routine maintenance.
Make sure to mount this product away from any flammable material as indicated in the
Safety Notes section.
If hanging this product, make sure that the location where you are mounting it can
support its weight. Please see the Technical Specifications section of this manual for
the weight requirement of this product.
Procedure
The COLORado™ Range IP comes with omega brackets that attach to the bottom of the
product using ¼ turn locking screws to which you can attach clamps. You must supply your
own clamps and make sure that they are capable of supporting the weight of this product.
You must use two mounting points per unit. Alternatively, you can remove the omega
brackets and mount the product to the floor.
ProductMounting
Diagram
Safety Cable
(included)
Clamps(not
included)
OmegaBrackets
OverheadMounting
FloorMounting

Operation
-8- COLORado™ Range IP User Manual Rev. 06
4. Operation
Control Panel
Description
Button Function
<MENU> Exits from the current menu or function
<SET> Enables the currently displayed menu or
sets the currently selected value in to the
current function
<UP> Navigates upward through the menu list and
increases the numeric value when in a
function
<DOWN> Navigates downward through the menu list
and decreases the numeric value when in a
function
Control Options
You can set the COLORado™ Range IP start address in the 001~512 DMX range. This
enables control of up to 32 units in the 16-channel TOUR personality.
Programming
Refer to the Menu Map on page 14 to learn how the menu options relate to each other.
The Menu Map has a Main Level and a variable number of programming levels for each
option.
To go to an option in the Main Level, press <MENU> repeatedly until the option shows on
the display. Press <SET> to select it. This will take you to the first programming level for
that option.
To select an option or value within the current programming level, press <UP> or <DOWN>
until shown on the display. Press <SET> to accept. If there is another programming level,
you will see its first option. Otherwise, you will see the selected value.
To exit to the previous menu level, press <MENU>.
DMX Personality
This setting enables the user to choose a particular DMX personality.
1. Go to PERS.
2. Select the desired personality (TOUR, ARC1, AR1 + D, ARC3, AR3 + D, AR3 + S,
HSV, or BLOC).
See the DMX Values section for the highest starting address you can select for
each personality.
Make sure that the starting addresses on the various units do not overlap due to
the new personality setting. See the DMX Values section.

Operation
COLORado™ Range IP User Manual Rev. 06 -9-
DMX Control
In this mode, each unit will respond to a unique starting address from the DMX controller.
All units with the same starting address will respond in unison.
1. Select the personality as shown in DMX Personality.
2. Set the running mode:
a. Go to RUN.
b. Select DMX.
3. Set the starting address:
a. Go to ADDR.
b. Select the starting address (D001~512).
The highest possible starting address for each DMX mode are as follows:
DMX Mode DMX Address DMX Mode DMX Address DMX Mode DMX Address
TOUR 496
A
RC3 508 HSV 510
ARC1 510
A
RC3+D 507 BLOC 504
ARC1+D 509
A
RC3+S 506
Static Color
The Static Color mode enables for permanent RGBWA color mixing without a DMX
controller.
1. Go to STAT.
2. Select the desired color (RED, GREN, BLUE, WHIT, or AMBE).
3. Select the desired color value (0~255).
4. Repeat for the other colors.
5. Select STRB.
6. Select the desired frequency (0~20).
Auto Programs
Auto programs allow for dynamic RGBWA color mixing without a DMX controller.
1. Go to AUTO.
2. Select the desired auto (AT. 01~10)or custom program (PR. 01~10).
You cannot edit any of the auto programs (AT 01~10). However, you can edit the
custom programs (PR. 01~10). See Edit Customs for details.
Edit Customs
This setting enables the programming of up to 30 scenes for each of the 10 customizable
programs, including colors and effects.
1. Go to EDIT.
2. Select the desired auto program (PR. 01~10).
3. Select the desired scene (SC. 01~30).
4. Select the desired color or effect (RED, GREN, BLUE, WHIT, AMBE, STRB, TIME, or
FADE).
5. Select the color or effect value (000~255 for colors and timers, or 00~20 for strobe).
6. Repeat for the other colors or effects.
7. Return to the SC. level (step “3”).
8. Repeat the settings of colors and effects for the other scenes.

Operation
-10- COLORado™ Range IP User Manual Rev. 06
Master/Slave
The Master/Slave mode enables a group of COLORado™ Range IPs (the slave units) to
duplicate simultaneously the output of another COLORado™ Range IP (the master unit)
without a DMX controller.
1. Set each of the slave units:
2. Go to RUN.
3. Select SLAV.
4. Set the master unit:
5. Set the running mode to DMX as explained in DMX Control.
6. Select an auto or custom program as explained in Auto Programs, or a static mix of
colors.
The master unit is the one that runs a program, whether Auto, Custom, or Static
mode.
Do not connect a DMX controller to the units configured for Master/Slave
operation.
The master unit should be the first unit in the DMX daisy chain.
Color Settings
The COLOR setting determines how the COLORado™ Range IP generates the white color
based on various RGB settings.
1. Go to SET.
2. Select COLO.
3. Select OFF, RGBW, or UC.
OFF: When all the RGB faders are set to 255, the output is maximum, although
the resulting white color may not be balanced.
RGBW: When all the RGB faders are set to 255, the resulting output is defined by
the configured White color (see Whites Settings).
UC: When all the RGB faders are set to 255, the output matches that of less
efficient products (Universal Color).
Dimmer Curves
This setting determines how fast the output of the COLORado™ Range IP changes when
the operator modifies the values of the Red, Green, Blue, White, Amber, and Dimmer
faders. This setting gives the user four different options to simulate the dimming curve of
an incandescent lighting product.
1. Go to SET.
2. Select DIM.
3. Select a dimmer curve (OFF, DIM1, DIM2, DIM3, or DIM4).
OFF: The output is proportional (linear) to the Dimmer and RGBWA channel
values.
DIM1~4: The output follows the Dimmer and RGBWA channel values based on the
corresponding dimmer curve. DIM1 is the fastest and DIM4 is the slowest.

Operation
COLORado™ Range IP User Manual Rev. 06 -11-
Control Panel Lock
This setting enables the user to activate or disable the control panel lock, which keeps non-
authorized personnel from changing the product’s settings.
1. Go to KEY.
2. Select ON or OFF.
When the control panel lock is active, the product will prompt the user to enter the
password after 30 seconds of control panel inactivity or after turning on the product.
After being prompted to enter the password:
1. Press <UP>, <DOWN>, <UP>, <DOWN>, and <SET>.
Program Upload
This option enables the user to copy the custom programs of one COLORado™ Range IP
unit onto other COLORado™ Range IP units by using the Master/Slave method.
1. Configure and connect the units in a Master/Slave arrangement, where the master
unit has the custom programs you want to transfer onto the slave units.
2. At the master unit, go to SET.
3. Select UPLD.
4. When PASS shows press <SET>.
5. Enter the master access password as shown in Control Panel Lock.
6. When SEND shows, press <SET> to start the upload.
7. Wait for the upload process to finish (the display will show END before continuing or
turning the units off.
The master and slave units will provide the status of the process by lighting up as
follows:
Yellow indicates that the upload process is running.
Green indicates that the upload process completed successfully.
Red indicates that the upload process failed due to an error. Recheck all cable
connections and restart the process. If the issue persists, contact Chauvet
Technical Support.
DO NOT upload the data from a COLORado™ Range IP to a different product. The
other product may be become inoperative.

Operation
-12- COLORado™ Range IP User Manual Rev. 06
Reset
This setting enables the user to reset the COLORado™ Range IP to the default values,
including the custom programs.
1. Go to SET.
2. Select REST.
3. When PASS shows, press <SET>.
4. Enter the master access password as shown in Control Panel Lock.
5. Wait for the reset process to finish. (REST will strobe momentarily.)
6. The display will show END.
DefaultValues
Parameter Default Value Parameter Default Value
STAT R/G/B/W/A/S 000 COLO UC
AUTO AT.01 EDIT PR.01/SC.01
ADDR D.001 CAL1 WH.01
RUN DMX RGB.W R/G/B.255
PERS TOUR WDMX ACTI
DIM DIM4
Whites Setting
This setting enables the user to select and edit the temperature of the white colors used in
channel 12 (Macros) when in the TOUR mode. It also enables the user to define the
maximum RGB values when RGB to White (RGB.W) is active.
1. Go to CAL1.
2. Select a white color (WHITE 1~11).
3. Select a color (RED, GREN, BLUE, WHIT, or AMBE).
4. Select a color value (0~255).
5. Repeat for the other colors.
White Calibration
This setting enables the user to select the white color shown by the COLORado™ Range
IP when the color setting is RGBW and the DMX controller’s Red, Green, and Blue faders
are set to 255.
1. Go to CAL2.
2. Select a color (RED, GREN, or, BLUE).
3. Select a color value (0~255).
4. Repeat for the other colors
When selecting CAL2 > RGBW you will only be able to define the values of RED,
GREN (green), and BLUE.
The values of RED, GREN, and BLUE configured from CAL2 > RGBW will define the
color temperature shown when the RGB faders are set to 255 if SET > COLO >
RGBW is active.

Operation
COLORado™ Range IP User Manual Rev. 06 -13-
TOUR Notes
These notes clarify the way the TOUR DMX personality works.
Master Dimmer
Channel 1 controls the intensity of the currently projected color.
When Channel 1 is at the highest position (100%) the intensity of the output is at its
maximum.
Red, Green, Blue
White, and Amber
Color Selection
Channels 2 through 11 control the intensity ratio of each of the Red, Green, Blue, White,
and Amber LEDs in each module.
When these channels are at the highest position (100%), the intensity of each color is at
its maximum if SETTINGS > COLOR is OFF.
You can combine channels 2 through 11 to create over one trillion colors.
Color Macros
Channel 12 selects the required Color Macro.
Channel 12 has priority over channels 2 through 11.
Channel 1 controls the intensity of the Color Macro.
Strobe
Channel 13 controls the strobe frequency (not the intensity) of channels 2 through 12.
Channel 13 can strobe channels 2 through 12 when not running macros, the individual
faders (R, G. B, W, and A) as well as channel 1 control the output intensity.
Channel 13 can strobe channel 12 when running macros, allowing channel 12 to select
the macro and channel 1 to control the output intensity.
Auto/Custom
Channel 14 selects the preset auto programs AUTO 01~10 or the custom programs
CUSTOM 01~10.
When activating the custom programs CUSTOM 01~10, it is possible to control the Step
Time and Fade Time using channels 2 and 3 respectively.
Channel 14 has priority over channels 2 through 13.
Channel 15 controls the speed at which each auto programs plays.
Dimmer Speed
Channel 16 selects the dimmer mode and speed. Dimmer mode gives the user four
different options to simulate the dimming curve of an incandescent lighting product.
When DIMMER is set to OFF, the changes in the RGBWA and Master Dimmer faders
are linear. Otherwise, DIM1 is the fastest dimmer curve, while DIM4 is the slowest.

Operation
-14- COLORado™ Range IP User Manual Rev. 06
Menu Map
Main Level 2
nd
Level 3
rd
Level Description
STAT
RED
000~255
(0~100%) User can combine Red, Green, Blue, White, and Amber to generate a custom color.
GREN
BLUE
WHIT
AMBE
STRB 00~20 (0~20 Hz) Select a strobe frequency
AUTO AT. 1~10 Choose from 10 automatic programs
PR. Choose from 10 customizable programs
ADDR D001~512 N/A Sets the DMX starting address
RUN DMX/SLAV N/A Selects the DMX or SLAVE mode
PERS
TOUR
N/A
16-channel
ARC.1 3-channel
AR1.D 4-channel
ARC.3 5-channel
AR3.D 6-channel
AR3.S 7-channel
HSV 3-channel
BLOC 10-channel
SET
UPLD PASS SEND END
Uploads custom programs
REST PASS REST END Resets the product to the factory settings
DIM OFF Faders act linearly
DIM1~4 DIM1 (fastest)~DIM4 (slowest)
COLO OFF No color compensation RGBW White is defined by CAL2 > RGB.W
UC Color compensation to match older products
EDIT PR. (1~10) SC. (01~30)
RED
000~255 User can combine Red, Green, Blue, White, and
Amber to generate a custom color.
GREN
BLUE
WHIT
AMBE
STRB 00~20 Selects the strobe frequency (0~20 Hz)
TIME 000~255 Defines the step duration (0~100%)
FADE Defines the fade duration (0~100%)
CAL1 WH. (1~11)
RED
000~255 User can combine Red, Green, Blue, White, and
Amber to generate whites with various temperatures
(TOUR > Channel 12).
GREN
BLUE
WHIT
AMBE
CAL2 RGB.W RED 000~255 User can combine Red, Green, and Blue to generate
a balanced white (SET > COLOR >RGBW)).
GREN
BLUE
WDMX
(reserved for
future use)
ACTI ON/OFF
Reserved for future use.
REST YES/NO
Reserved for future use.
KEY ON/OFF N/A Turns the password on or off

Operation
COLORado™ Range IP User Manual Rev. 06 -15-
DMX Values
TOUR
Channel Function Value Percent/Setting
1 Dimmer 000 255 0~100%
2 Module 1 Red 000 255 0~100%
Step Time Only when running custom programs
3 Module 1 Green 000 255 0~100%
Step Time Only when running custom programs
4 Module 1 Blue 000 255 0~100%
5 Module 1 White 000 255 0~100%
6 Module 1 Amber 000 255 0~100%
7 Module 2 Red 000 255 0~100%
8 Module 2 Green 000 255 0~100%
9 Module 2 Blue 000 255 0~100%
10 Module 2 White 000 255 0~100%
11 Module 2 Amber 000 255 0~100%
12 Color Macro + White Balance
000 010
011 030
031 050
051 070
071 090
091 110
111 130
131 150
151 170
171 200
201 205
206 210
211 215
216 220
221 225
226 230
231 235
236 240
241 245
246 250
251 255
No function
R: 100% G: Up B: 0%
R: Down G: 100% B: 0%
R: 0% G: 100% B: Up
R: 0% G: Down B: 100%
R: Up G: 0% B: 100%
R: 100% G: 0% B: Down
R: 100% G: Up B: Up
R: Down G: Down B: 100%
R: 100% G: 100% B: 100% W: 100%
White 1: 3200 K
White 2: 3400 K
White 3: 4200 K
White 4: 4900 K
White 5: 5600 K
White 6: 5900 K
White 7: 6500 K
White 8: 7200 K
White 9: 8000 K
White 10: 8500 K
White 11: 10,000 K
13 Strobe 000 010
011 255 No Function 0~20 Hz
14 Auto + Custom Programs
000 040
041 050
051 060
061 070
071 080
081 090
091 100
101 110
111 120
121 130
131 140
141 150
151 160
161 170
171 180
181 190
191 200
201 210
211 220
221 230
231 255
No function
Auto 1
Auto 2
Auto 3
Auto 4
Auto 5
Auto 6
Auto 7
Auto 8
Auto 9
Auto 10
Custom 1
Custom 2
Custom 3
Custom 4
Custom 5
Custom 6
Custom 7
Custom 8
Custom 9
Custom 10
15 Auto Speed 000 255 Only when running an auto program
16 Dimmer Speed
000 009
010 029
030 069
070 129
130 189
190 255
Dimmer speed as per Control Panel
Linear dimmer
Non-linear dimmer 1 (fastest)
Non-linear dimmer 2
Non-linear dimmer 3
Non-linear dimmer 4 (slowest)

Operation
-16- COLORado™ Range IP User Manual Rev. 06
DMX Values (cont.)
BLOCK
Channel Function Value Percent/Setting
1 Module 1 Red 000 255 0~100%
2 Module 1 Green 000 255 0~100%
3 Module 1 Blue 000 255 0~100%
4 Module 1 White 000 255 0~100%
5 Module 1 Amber 000 255 0~100%
6 Module 2 Red 000 255 0~100%
7 Module 2 Green 000 255 0~100%
8 Module 2 Blue 000 255 0~100%
9 Module 2 White 000 255 0~100%
10 Module 2 Amber 000 255 0~100%
ARC1
Channel Function Value Percent/Setting
1 Red 000 255 0~100%
2 Green 000 255 0~100%
3 Blue 000 255 0~100%
AR1.D
Channel Function Value Percent/Setting
1Dimmer 000 255 0~100%
2 Red 000 255 0~100%
3 Green 000 255 0~100%
4 Blue 000 255 0~100%
ARC3
Channel Function Value Percent/Setting
1 Red 000 255 0~100%
2 Green 000 255 0~100%
3 Blue 000 255 0~100%
4 White 000 255 0~100%
5 Amber 000 255 0~100%
AR3.D
Channel Function Value Percent/Setting
1 Dimmer 000 255 0~100%
2 Red 000 255 0~100%
3 Green 000 255 0~100%
4 Blue 000 255 0~100%
5 White 000 255 0~100%
6 Amber 000 255 0~100%
AR3.S
Channel Function Value Percent/Setting
1 Dimmer 000 255 0~100%
2 Red 000 255 0~100%
3 Green 000 255 0~100%
4 Blue 000 255 0~100%
5 White 000 255 0~100%
6 Amber 000 255 0~100%
7 Strobe 000 255 0~20 Hz
HSV
Channel Function Value Percent/Setting
1 Hue 000 255 0~100%
2 Saturation 000 255 0~100%
3 Value 000 255 0~100%