Chauvet Intimidator Wash LED 150 User manual

Quick Reference Guide

Intimidator™ Spot LED 150 QRG
2
About This
Guide
The Intimidator™ Spot LED 150 Quick Reference Guide (QRG) has basic
product information such as mounting, menu options, and DMX values
.
Download the User Manual from www.chauvetlighting.com for more details.
Disclaimer
The information and specifications contained in this QRG are subject to
change without notice.
Safety Notes
These Safety Notes include important information about installation, use, and
maintenance.
•This product is not intended for permanent installation.
•ONLY connect this product to a grounded and protected circuit.
•Always disconnect from power before cleaning or replacing the fuse.
•DO NOT look at the light source when the product is on.
•Make sure the power cord is not crimped or damaged.
•Never disconnect this product from power cord by pulling or tugging on the
cord.
•When mounting this product overhead, use a safety cable.
•DO NOT allow flammable materials close to the unit while operating.
•DO NOT touch this product when it is operating because it may be hot.
•The voltage of the outlet to which you are connecting this product must be
within the range stated on the decal or rear panel of the product.
•This product is for indoor use only! (IP20) To prevent risk of fire or shock,
do not expose this product to rain or moisture.
•Always mount
this product in a location with adequate ventilation, at least
20 in (50 cm) from adjacent surfaces.
•Be sure that no ventilation slots on the unit’s housing are blocked.
•Never connect this product to a dimmer or rheostat.
•Replace the fuse with the same type and rating.
•ONLY use the hanging/mounting bracket or the handles to carry this
product.
•The maximum ambient temperature is 104° F (40° C). Do not operate this
product at higher temperatures.
•In the event of a serious operating problem, stop using immediately.
•
DO NOT open this product. It contains no user-serviceable parts.
What Is
Included
•Intimidator™ Spot LED 150
•Mounting Bracket
•2 Mounting Bolts
•Safety Eyebolt
•Power Cord
•Warranty Card
•Quick Reference Guide
To Begin
Unpack your Intimidator™ Spot LED 150 and make sure you have received
all parts in good condition. If the box or contents appear damaged, notify the
carrier immediately, not CHAUVET®.
Product
Description
The Intimidator™ Spot LED 150 is a bright, lightweight and compact LED
moving head perfect for mobile applications.

Intimidator™ Spot LED 150 QRG
3
Product Overview
AC Power
This product has an auto-ranging power supply that can work with an input
voltage range of 100~240 VAC, 50/60 Hz.
Power Linking
You can link up to 6 Intimidator™ Spot LED 150 products at 120 VAC and
12 units at 230 VAC.
Fuse
Replacement
To replace the fuse in the Intimidator™ Spot LED 150:
1. Disconnect the product from power.
2. Using a flat-head screwdriver, loosen the fuse holder and pull
straight out.
3. Remove the blown fuse from the holder and replace with a fuse of
the exact same type and rating.
4. Re-insert the fuse holder and reconnect power.
Fuse Holder
DMX In/Out
Power In/Out
LED Display Cooling Fan
Moving Head
Adjustable Lens
Moving Yoke

Intimidator™ Spot LED 150 QRG
4
Mounting
Before mounting this product, read the Safety Notes.
Product
Mounting
Diagram
Control Panel
Description
Button Function
<MENU>
Exits from the current menu or function.
<UP>
Navigates upwards through the menu list and increases the
numeric value when in a function.
<DOWN>
Navigates downwards through the menu list and decreases the
numeric value when in a function.
<ENTER>
Enables the currently displayed menu or sets the currently
selected value
Menu Options
Main Level Programming Levels Description
DMX Mode
001-512
Sets the DMX starting address
Operating Mode
SLAv (Son)
Slave operating mode
NASL (SLoU)
Automatic Mode, Slow Program
NAFA (FASt)
Automatic Mode, Fast Program
NStS (SrUn)
Sound Active Mode
Pan
Normal Pan
PAn
Normal Pan operation
Inverse Pan
r PAn
Inverse Pan operation
Tilt
Normal Tilt
tiL
Normal Tilt operation
Inverse Tilt
r tiL
Inverse Tilt operation
Display
Normal Display
diS
Change the LCD display text
Inverse Display
r diS
Channel Mode
11-Channel
Mode
11CH Selects the DMX personality
6-Channel Mode
6CH
Manual Pan Restrict
Pan 540
PA54
Select Pan angle restrictions
Pan 360
PA36
Pan 180
PA18
Manual Tilt Restrict
Tilt 270
Ti27
Select Tilt angle restrictions
Tilt 180
Ti18
Tilt 90
Ti 9
Reset
rESt
Resets fixture
Load
LoAd
Load factory defaults
Bracket Attachment (x2)
Rubber Feet (x4)
Safety Loop Attachment Point

Intimidator™ Spot LED 150 QRG
5
DMX Linking
The Intimidator™ Spot LED 150 can work with a DMX controller when
linked by DMX serial connections.
Instructions for connecting and
configuring this product for DMX operation are in the User Manual.
If you
are not familiar with DMX, download the DMX Primer
from
www.chauvetlighting.com.
Starting Address
To ensure full access to all channels in each DMX mode, the highest
recommended DMX address is 502.
Master/Slave
Connection
The Intimidator™ Spot LED 150 uses the DMX data connection for its
Master/Slave mode. Instructions for connecting and configuring this product
for Master/Slave operation are in the User Manual.
DMX Values
6-CH
Channel
Function Value Percent/Setting
1
Pan
000 255
0-540°
2
Tilt
000 255
0-270°
3 Color
000 005
White
006 011
Yellow
012 017
Magenta
018 023
Green
024 029
Red
030 035
Cyan
036 041
Orange
042 047
Blue
048 053
Light Green
054 063
Amber
064 069
White + Yellow
070 075
Yellow + Magenta
076 081
Magenta + Green
082 087
Green + Red
088 093
Red + Cyan
094 099
Cyan + Orange
100 105
Orange + Blue
106 111
Blue + Light Green
112 117
Light Green + Amber
118 127
Amber + White
128 191
Color cycling rainbow with increasing speed
192 255
Reverse color cycling rainbow with
increasing speed
4 Shutter
000 003
Blackout
004 007
Open
008 215
Strobe (0-20 Hz)
216 255
Open

Intimidator™ Spot LED 150 QRG
6
6-CH (cont.)
Channel
Function
Value
Percent/Setting
5
Dimmer
000 255
0-100%
6 Gobo Wheel
064 071
Gobo 9 shake, from slow to fast
072 079
Gobo 8 shake, from slow to fast
080 085
Gobo 7 shake, from slow to fast
086 091
Gobo 6 shake, from slow to fast
092 097
Gobo 5 shake, from slow to fast
098 103
Gobo 4 shake, from slow to fast
104 109
Gobo 3 shake, from slow to fast
110 115
Gobo 2 shake, from slow to fast
116 121
Gobo 1 shake, from slow to fast
122 127
Open
128 191
Cycle effect with increasing speed
192 255
Reverse cycle effect with increasing speed

Intimidator™ Spot LED 150 QRG
7
11-CH
Channel
Function
Value
Percent/Setting
1
Pan
000 255
0-540°
2
Tilt
000 255
0-270°
3
Fine Pan
000 255
Fine control of panning
4
Fine Tilt
000 255
Fine control of tilting
5
Speed
000 255
Pan/Tilt speed (fast to slow)
6 Color
000 005
White
006 011
Yellow
012 017
Magenta
018 023
Green
024 029
Red
030 035
Cyan
036 041
Orange
042 047
Blue
048 053
Light Green
054 063
Amber
064 069
White + Yellow
070 075
Yellow + Magenta
076 081
Magenta + Green
082 087
Green + Red
088 093
Red + Cyan
094 099
Cyan + Orange
100 105
Orange + Blue
106 111
Blue + Light Green
112 117
Light Green + Amber
118 127
Amber + White
128 191
Color cycling rainbow with increasing speed
192 255
Reverse color cycling rainbow with
increasing speed
7 Shutter
000 003
Blackout
004 007
Open
008 215
Strobe (0-20 Hz)
216 255
Open
8
Dimmer
000 255
0-100%

Intimidator™ Spot LED 150 QRG
8
11-CH
(cont.)
Channel
Function
Value
Percent/Setting
9 Gobo Wheel
064 071
Gobo 9 shake, from slow to fast
072 079
Gobo 8 shake, from slow to fast
080 085
Gobo 7 shake, from slow to fast
086 091
Gobo 6 shake, from slow to fast
092 097
Gobo 5 shake, from slow to fast
098 103
Gobo 4 shake, from slow to fast
104 109
Gobo 3 shake, from slow to fast
110 115
Gobo 2 shake, from slow to fast
116 121
Gobo 1 shake, from slow to fast
122 127
Open
128 191
Cycle effect with increasing speed
192 255
Reverse cycle effect with increasing speed
10 Control Functions
000 007
No function
008 027
Blackout while pan/tilt moving
028 047
Blackout while moving gobo wheel
048 067
Disable blackout while pan/tilt/moving gobo
wheel
068 087
Blackout while moving color wheel
088 107
Disable blackout while pan/tilt/moving color
wheel
108 127
Disable blackout while moving gobo/color
wheel
128 147
Disable blackout while moving all options
148 167
Reset pan
168 187
Reset tilt
188 207
Reset color wheel
208 227
Reset gobo wheel
228 247
Reset all channels
248 255
No function
11 Auto Programs
000 007
No function
008 135
Auto programs 1-8
136 255
Sound active programs 1-8

Intimidator™ Spot LED 150 QRG
9
Outside the U.S., United Kingdom, or Ireland, contact your distributor to
request support or return a product. Visit www.chauvetlighting.com
for
contact information.
Contact Us
World Headquarters
CHAUVET®
General Information
Address: 5200 NW 108th Avenue
Sunrise, FL 33351
Voice: [phone]
Fax: [phone]
Toll free: [phone]
United Kingdom and Ireland
CHAUVET® Europe Ltd.
General Information
Address: Unit 1C
Brookhill Road Industrial Estate
Pinxton, Nottingham, UK
NG16 6NT
Voice: [phone]
Fax: [phone]
Technical Support
Voice: [phone] (Press 4)
Fax: [phone]
Email: [e-mail]
Technical Support
Email: [e-mail]
World Wide Web
www.chauvetlighting.com
World Wide Web
www.chauvetlighting.co.uk
Intimidator™ Spot LED 150 QRG – Rev. 1 4TL
© Copyright 2012 CHAUVET®
All rights reserved.
Printed in the P. R. C.