Chauvet Legend 1200E Wash User manual

User Manual

Edition Notes
Legend™ 1200E Wash User Manual Rev. 02e
Edition Notes
The Legend™ 1200E Wash User Manual Rev. 02e covers the description, safety
precautions, installation, programming, operation, and maintenance of the Legend™
1200E Wash product. CHAUVET® released this edition of the Legend™ 1200E Wash
User Manual Rev. 02e in October 2010.
Trademarks
CHAUVET® is a registered trademark of CHAUVET & Sons Inc. (d/b/a CHAUVET® or
Chauvet). The CHAUVET® logo in its entirety including the Chauvet name and the
dotted triangle, and all other trademarks on this manual pertaining to services, products,
or marketing statements (example: It’s Green Thinking™) are owned or licensed by
CHAUVET®. Any other product names, logos, brands, company names, and other
trademarks featured or referred to within this document are the property of their
respective trademark holders.
Copyright Notice
CHAUVET® owns the content of this user manual in its entirety, including but not limited
to pictures, logos, trademarks, and resources.
© Copyright 2010 CHAUVET®
All rights reserved
Electronically published by CHAUVET® in the United States of America
Manual Usage
CHAUVET® authorizes its customers to download and print this manual for professional
information purposes only. CHAUVET® expressly prohibits the usage, copy, storage,
distribution, modification, or printing of this manual or its content for any other purpose
without its written consent.
Document Printing
For better results, print this document in color, on letter size paper (8.5 x 11 inches),
double sided. If using A4 paper (210 x 297 mm), configure your printer to scale the
content of this document to A4 paper.
Intended Audience
Any person in charge of installing, operating, and/or maintaining the Legend™ 1200E
Wash should read the guide that shipped with it as well as this manual in their entirety
before installing, operating, or maintaining this product.
Disclaimer
CHAUVET® believes that the information contained in this manual is accurate in all
respects. However, CHAUVET® assumes no responsibility for any error or omissions
in this document. CHAUVET® reserves the right to revise this document and to make
changes from time to time in the content hereof without obligation of CHAUVET® to
notify any person or company of such revision or changes. This does not constitute in
any way a commitment by CHAUVET® to make such changes. CHAUVET® may issue
a revision of this manual or a new edition of it to incorporate such changes.
CHAUVET®
Publications Hot
Line
If you have any comments about the accuracy of this document or general suggestions
regarding how we can improve it, please call us at [phone] (US callers) or +1-
954-929-1115 (international callers). You can download the latest versions of all
CHAUVET® products’ manuals from www.chauvetlighting.com.
Document
Revision The Legend™ 1200E Wash User Manual Rev. 02e supersedes all previous versions of
this manual. Please discard any older versions of this manual you may have, whether in
printed or electronic format, and replace them with this version.
Author Editor Manager PD Manager
O. Desmonteix D. Couppe M. Graham F. Sellers
Product at
a Glance
Use on Dimmer

Auto Programs

Outdoor Use

Auto-ranging Power Supply

Sound Activated

Replaceable Fuse

DMX

User Serviceable

Master/Slave

CMY Color Mixing


Table of Contents
Legend™ 1200E Wash User Manual Rev. 02e -a-
Table of Contents
1. Before You Begin............................................................................................................1
What is Included.............................................................................................................................1
Unpacking Instructions ...................................................................................................................1
Typographic Conventions...............................................................................................................1
Icon Meaning..................................................................................................................................1
Safety Notes...................................................................................................................................2
2. Introduction.....................................................................................................................3
Product Description........................................................................................................................3
Features.........................................................................................................................................3
Additional Features....................................................................................................................................3
Options......................................................................................................................................................3
DMX Channel Summary.................................................................................................................4
Product Overview...........................................................................................................................5
Product Dimensions .......................................................................................................................6
3. Setup................................................................................................................................7
AC Power.......................................................................................................................................7
AC Plug.....................................................................................................................................................7
Fuse Replacement.....................................................................................................................................7
DMX Linking...................................................................................................................................7
DMX Modes...............................................................................................................................................7
Mounting........................................................................................................................................8
Orientation.................................................................................................................................................8
Rigging......................................................................................................................................................8
Bracket Installation.....................................................................................................................................9
Color Wheels..................................................................................................................................9
Lamp Replacement ......................................................................................................................10
Increasing the Lamp’s Life........................................................................................................................10
4. Operation.......................................................................................................................11
Control Panel Description.............................................................................................................11
Home Screen...........................................................................................................................................11
Control Options ............................................................................................................................11
Menu Map....................................................................................................................................12
Programming................................................................................................................................13
Navigation Control ...................................................................................................................................13
DMX Operation........................................................................................................................................13
Fixture Settings........................................................................................................................................13
Lamp Settings..........................................................................................................................................14
Display Settings.......................................................................................................................................15
Fixture Tests............................................................................................................................................15
Fixture Information...................................................................................................................................16
Fixture Reset...........................................................................................................................................16
Special Functions.....................................................................................................................................17
Offset Mode..................................................................................................................................18
Entering Offset Mode...............................................................................................................................18
DMX Values.................................................................................................................................19
Mode 1 (Basic).........................................................................................................................................19
Mode 2 (Advanced)..................................................................................................................................20
5. Technical Information...................................................................................................21
General Maintenance...................................................................................................................21
Dust Screen Cleaning ..............................................................................................................................21
Error Messages............................................................................................................................22
Troubleshooting Guide .................................................................................................................23

Table of Contents
-b- Legend™ 1200E Wash User Manual Rev. 02e
Returns Procedure........................................................................................................................24
Claims..........................................................................................................................................24
Contact Us....................................................................................................................................24
Technical Specifications................................................................................................................25

Before You Begin
Legend™ 1200E Wash User Manual Rev. 02e -1-
1. Before You Begin
What is
Included
•One Legend™ 1200E Wash
•2 x omega brackets with hanging trigger clamps
•Warranty Card
•Quick Reference Guide
Unpacking
Instructions
This product ships in a flight case. Immediately upon receiving this product, carefully
unpack it and check the container in which you received it. Make sure that you have
received all the parts indicated above and that they are all in good condition. If the
material inside the container (this product and any other accessory included with it)
appears damaged from shipping or if t
he container shows signs of mishandling, notify
the shipper immediately. In addition, retain the container and all the packing material for
inspection.
See the Claims section in the Technical Information chapter.
Typographic
Conventions
Convention Meaning
1~512 A range of values in the text
50/60 A set of mutually exclusive values in the text
[10] A DIP switch to be configured
Claims A new term, or a section or chapter in this document
“COLORado™ UM” The name of another publication or manual
<SET> A button on thefixture’s control panel
Settings A fixture function or a menu option
MENU > Settings A sequence of menu options
1~10 A range of menu values from which to choose in a menu
Yes/No
A set of two mutually exclusive menu options in a menu
ON A unique value to entered or select in a menu
Icon Meaning
Icon Meaning
This icon indicates critical installation, configuration, or operation
information. Failure to comply with this information may render
the fixture partially or completely inoperative, damage third-party
equipment, or cause harm to the user.
This icon indicates important installation or configuration
information. Failure to comply with this information may prevent
the fixture from functioning correctly.
This icon indicates useful, although non-critical information.
The term “DMX” used throughout this document refers to the USITT DMX512-A
transmission protocol.

Before You Begin
-2- Legend™ 1200E Wash User Manual Rev. 02e
Safety Notes
Please read the following notes carefully because
they include important safety
information about the installation, usage, and maintenance of this product.
It is important to read all these notes before starting to work with this product.
There are no user serviceable parts inside this product. Any reference to
servicing it you may find from now on in this User Manual will only apply to
properly CHAUVET® certified technicians. Do not open the housing or attempt
any repairs unless you are one of them.
Please refer to all applicable local codes and regulations for the proper
installation of this product.
Keep this manual for future consultation. If you sell this product to another user,
make sure that they also receive this manual.
Personal Safety
•Avoid direct eye exposure to the light source while the fixture is on.
•Always disconnect this product from its power source before servicing.
•Lamp explosion hazard!
•The bulb remains hot for a long time after turn off. Never touch the bulb
barehanded and always handle it by its ceramic base.
Do not open the lamp cover within five minutes of having
turned off the fixture.
•Always connect this product to a grounded circuit to avoid the risk of electrocution.
•Do not touch this product’s housing when operating because it may be very hot.
Mounting and Rigging
•This product is for indoor use only! To prevent risk of fire or shock, do not expose
this product to rain or moisture.
•Make sure there are no flammable materials close to this product while operating.
•When hanging this product, always secure it to a fastening device using a safety
chain/cable (not provided).
•Do not carry this fixture from the head; use the handles instead.
Power and Wiring
•Always make sure that you are connecting this product to the proper voltage, as
per the specifications in this manual or on the product’s sticker.
•Never connect this product to a dimmer pack or rheostat.
•Make sure the product’s housing or power cable are not cracked, crimped, or
damaged.
•Never disconnect this product by pulling or tugging on the power cable.
Operation
•Do not operate this fixture if you see damage on the housing, lenses, ultraviolet
filter, or cables; have the damaged parts replaced by an authorized technician at
once.
•Do not cover the ventilation slots when the fixture is operating to avoid internal
overheating.
•Do not aim this fixture toward the Sun. Otherwise, the lenses could concentrate the
solar energy and cause internal overheating.
•The maximum ambient temperature (Ta) is 104° F (40° C). Do not operate this
product at a higher temperature.
•In case of a serious operating problem, stop using this product immediately!
In the unlikely event that your Legend™ 1200E Wash may require service, please
contact CHAUVET® Technical Support.

Introduction
Legend™ 1200E Wash User Manual Rev. 02e -3-
2. Introduction
Product
Description
The Legend™ 1200E Wash is a moving yoke fixture with a 1200 W short arc discharge
lamp. It contains an LCD control panel (display), through which all of the settings can
be set or modified.
This fixture can operate at 200~240 VAC, 50/60 Hz, wh
ich eliminates the need for a
voltage selection switch.
The ballast and igniter in the lamp circuit are both of the
electronic type.
Features
•16 or 21-channel DMX moving yoke
•Pan: 540⁰in 2.8 sec
•Tilt: 270⁰in 1.6 sec
•Color wheel 1:
Seven colors + white (red, blue, pink, green, yellow, orange, and UV)
Split/linear colors
Rainbow color spin at variable speeds both wheels
•Color wheel 2:
Seven colors + white (5,600 K, magenta, light blue, light green, light yellow,
pink, and dark blue
Split/linear colors
Rainbow color spin at variable speeds both wheels
•Variable CTC filter (3,200~6,000 K)
•CMY color mixing system with vector speed adjustments
•Variable shutter
•Variable 16-bit dimming (0~100%)
•Linear zoom (5.6~20.75⁰)
•Individual reset of pan/tilt, color, shutter, and zoom
•Remote fixture reset, lamp on/off, vector speed adjustments
•Built-in movement macros with range adjustments
•Built-in color macros
Additional Features
•3-pin and 5-pin DMX connections
•User-configurable lamp ignition delay
•User-configurable maintenance reminder
•Electronic ballast with power factor correction
•Electronic power supply
•Automatic pan & tilt correction
•Pan & tilt locks
•Lamp and fixture use timer
•Power saver mode
Options •W-DMX (wireless DMX) receiver
•W-DMX (wireless DMX) transmitter

Introduction
-4- Legend™ 1200E Wash User Manual Rev. 02e
DMX Channel Summary
16-Channel DMX Mode
DMX Channel
Function
1
Pan
2
Pan fine
3
Tilt
4
Tilt fine
5
Pan/tilt speed
6
Dimmer
7
Shutter
8
Color 1
9
Color 2
10
Cyan
11
Magenta
12
Yellow
13
3,200~6.000 K (CTO) Filter
14
Preset Color
15
Zoom
16
Function
21-Channel DMX Mode
DMX Channel
Function
1
Pan
2
Pan fine
3
Tilt
4
Tilt fine
5
Pan/tilt speed
6
Dimmer
7
Dimmer fine
8
Shutter
9
Color 1
10
Color 2
11
Cyan
12
Magenta
13
Yellow
14
3,200~6000 K (CTO)
15
CMY/CTO Filter Speed
16
Zoom
17
Preset Color
18
Color Macro
19
Pan/Tilt Macro
20
Pan/Tilt Macro Range
21
Function

Introduction
Legend™ 1200E Wash User Manual Rev. 02e -5-
Product Overview
ENTER button
Jog wheel
LCD Display
MENU button
DMX LED
Power LED
Power input
Power switchDMX in (3-pin)
DMX out (3-pin
)
Fuse holder
(Main)
DMX in (5-pin)
DMX out (5-pin
)
Fuse holder
(Lamp)
Carrying
handle
(1 of 2)
Tilt lock
Control panel
Pan lock

Introduction
-6- Legend™ 1200E Wash User Manual Rev. 02e
Product Dimensions

Setup
Legend™ 1200E Wash User Manual Rev. 02e -7-
3. Setup
AC Power
The Legend 1200E Wash has an auto-ranging power supply that can work with an input
voltage range of 200~240 VAC, 50/60 Hz.
Make sure that you are connecting this product to the proper voltage, as per the
specifications in this guide, the product’s user manual, or on the product’s sticker.
Always connect the Legend™ 1200E Wash
to a protected circuit with an
appropriate electrical ground to avoid the risk of electrocution or fire.
To determine the power requirements for the Legend™ 1200E Wash see th
e label
affixed to the side of the fixture. Alternatively, you may refer to the corresponding
specifications chart in the Technical Information chapter of this manual.
The listed current rating indicates the maximum current draw during normal operation.
Please refer to the Sizing the Circuit Breakers section in the Appendix chapter of this
manual.
Never connect the Legend™ 1200E Wash to a rheostat (variable resistor) or
dimmer circuit, even if the rheostat or dimmer channel serves only as a 0 to 100%
switch.
AC Plug The Legend™ 1200E Wash has a bare-ended power input cord that is hard-wired to the
base of the fixture. Use the table below to wire a plug for the power cord.
Connection Wire (US) Wire (Europe) Screw Color
AC Live Black Brown Yellow or Brass
AC Neutral White Blue Silver
AC Ground Green/Yellow Green/Yellow Green
Make sure to disconnect the fixture’s power cord before replacing a blown fuse,
and always replace it with a fuse of the same type and rating.
Fuse Replacement 1) With a Phillips #2 screwdriver, unscrew the fuse holder from its housing.
2) Remove the blown fuse from its holder and replace it with a good fuse of the exact
same type and rating.
3) Screw the fuse holder back in its place and reconnect power.
DMX Linking
You may link the Legend™ 1200E Wash to a DMX controller using a standard DMX
serial connection. If using other DMX compatible fixtures with the Legend™ 1200E
Wash, it is possible to control them individually with a single DMX controller.
If you are not familiar with the DMX standard, please refer to the “DMX Primer”
document, which you can download from the CHAUVET® Web site.
DMX Modes
The Legend™ 1200E Wash can operate in 16 and 21-channel DMX modes.
You will
find information about these DMX modes in the Introduction
chapter (brief description),
the Operation Instructions chapter (configuration details), and the DMX Values section
(individual channel values).

Setup
-8- Legend™ 1200E Wash User Manual Rev. 02e
Mounting
Before mounting this fixture, read and follow the safety recommendations indicated in
the Safety Notes section (page 2 of this manual).
Orientation
Always mount this fixture in any safe position while making sure that there is adequate
room around it for ventilation, and for the fixture’s head to pan and tilt freely.
Make sure to mount this fixture away from any flammable material as indicated in the
Safety Notes section (page 2 of this manual).
Rigging
The Legend™ 1200E Wash comes with two omega brackets and two clamps. You will
have to use two mounting points per fixture. You can also mount the Legend 1200E
Wash on the floor or any other firm, horizontal surface. CHAUVET® recommends
following the general guidelines below when mounting the Legend™ 1200E Wash.
•When selecting an installation location, consider ease of access to the fixture for
operation, programming adjustments, and routine maintenance.
•Never mount the fixture in places where rain, high humidity, extreme temperature
changes, or restricted ventilation may affect it.
•Make sure that the location where you are mounting the fixture can support its
weight. Please see the Technical Specifications section of this manual for the weight
requirement of this fixture.
Only mount this fixture where the base is in a horizontal position, either hanging
or standing, as indicated in the diagram below. Doing otherwise may cause
damage to the fixture and void its warranty.
Product Mounting
Diagram
Safety Cable Installation
Diagram
Standing
position
Standing
position
Hanging
position
Safety
cable
Omega
brackets with
clamps

Setup
Legend™ 1200E Wash User Manual Rev. 02e -9-
Bracket Installation
You can mount the included brackets on either side of the mounting plate. This allows
for positioning the fixture’s base in the best possible orientation
to access the control
panel and the fuses.
Bracket Mounting
Diagram
Color Wheels
The Legend 1200E Wash comes with two color wheels. The diagram
below shows both
wheels and the number assigned to each of the colors on each wheel.
Control Panel
Location 2
Location 1

Setup
-10- Legend™ 1200E Wash User Manual Rev. 02e
Lamp
Replacement
The Legend 1200E Wash is equipped with a Phillips MSR1200SA/SE FastFit lamp. This
lamp uses a socket that allows for fast and easy lamp changes. Follow the procedure
below to safelychange the Legend 1200E Wash’s lamp.
Never touch the lamp’s envelope (glass bulb) with your bare hands. FastFit lamps
do not require touching the lamp’s envelope during removal or installation. If you
touched the lamp’s envelope, clean it with isopropyl alcohol and wipe it with a
lint-free cloth before installing it.
Procedure 1) Turn the fixture off and disconnect it from the power outlet.
2) Wait at least 15 minutes for the lamp to cool down.
3) Loosen the two screws on the lamp cover (marked “A” in the diagram).
4) Lift and rotate the lamp cover as per the diagram to expose the base of the lamp.
5) Rotate the ceramic base of the lamp 90º counterclockwise.
6) Pull the lamp out by holding it from its base only.
7) Insert the new lamp and turn it 90º clockwise.
8) Reverse steps 3 and 4.
9) Use the adjustment screws (marked “B” in the diagram) to position the lamp in the
center of the reflector to obtain the best output.
Lamp Replacement
Diagram
FastFit Socket Positions
Increasing the
Lamp’s Life
•NEVER turn the fixture’s power off while the lamp is striking, as this can damage the
lamp permanently.
•ALWAYS turn the lamp off by using the DMX controller or the fixture’s control panel.
Then wait at least five minutes before switching off the fixture. This will keep the
fans running to extract any remaining heat from the fixture’s head.
•ALWAYS wait 15 minutes to turn the lamp back on.
•DO NOT touch the lamp without wearing gloves to avoid leaving grease on the bulb
or on the contacts that could reduce the lamp’s life.
•ALWAYS change the lamp when it has reached its recommended lifespan to avoid
the risk of lamp explosion.
Lamp cover Lamp
Locked Unlocked

Operation
Legend™ 1200E Wash User Manual Rev. 02e -11-
4. Operation
Control Panel
Description
Button Function
<MENU> Exits from the current menu or function
<ENTER> Enables the currently displayed menu or sets the currently
selected value in to the current function
<JOG WHEEL> Navigates upwards through the menu list and increases the
numeric value when in a function
Control Panel Diagram
Home Screen Upon power up, the LCD will show the Legend logo and the fixture’s identification. After
completing the power up tests, the LCD will show the DMX address, the DMX mode,
and the fixture’s temperature, along with the warning sign if the tests have detected an
error.
•When the warning sign shows, press <ENTER> to read the corresponding
error message (see Error Messages in the Technical Information chapter).
•Press <ENTER> while looking at an error messages to clear it.
Control Options
You can set the Legend™ 1200E Wash’s start address in the 001~512 DMX range. This
allows for the control of up to 32 fixtures in the 16-channel DMX Mode 1 and up to 24
fixtures in the 21-channel DMX Mode 2.
DMX Mode
Fixture’s temperature
DMX Address
Error Indicator
Jog wheel
MENU button
ENTER button

Operation
-12- Legend™ 1200E Wash User Manual Rev. 02e
Menu Map
Main Menu Level 2nd Level 3rd Level 4th Level
DMX Functions
DMX Address
1~512
N/ADMX Channel Mode
Mode 1 (16)
Mode 2 (21)
View DMX Value
N/A
WDMX Setting
(Requires optional
W-DMX card)
Active
No/Yes
Retransmit
Reset Memory
Fixture Settings
Pan Inverse
No/Yes N/A
Tilt Inverse
Bl.o. P/T Moving
Bl.o. Color Change
Lamp Settings
On/Off
On/Off
N/A
State/Power On
Off Via DMX
No/Yes
On if DMX On
Off if DMX Off
Cooling Mode
High/Auto
Ignition Delay
0~255
Low Power Delay
Display Settings
Display Inverse
No/Yes N/A
Back Light Auto Off
Back Light Intensity
1~10
Temperature Unit
°C/°F
Fixture Test
Auto Test
N/A
N/A
Manual Test (1~21)
000~255
Fixture Information
Fixture use time
N/A
N/A
Lamp On Time
Exit/Reset Time
Firmware Version
N/A
Reset Function
Pan & Tilt
No/Yes N/A
Color
Shutter & Dimmer
Zoom
All
Special Functions
Fixture Maintenance
Interval/ Remain Time
N/A
Factory Settings
No/Yes

Operation
Legend™ 1200E Wash User Manual Rev. 02e -13-
Programming
Carry out all the programming procedures indicated below from the control panel. Refer
to the Menu Map page to learn how the menu options relate to each other.
Navigation Control
The Control Panel’s liquid crystal display (LCD) shows the menu items you select. When
you select a menu function, the display will show the available options for the selected
function with the first one already highlighted.
If not at the home screen, press <MENU> repeatedly until seeing the home screen.
To enter programming mode from the home screen, press <MENU>. This is the first
menu level.
To highlight functions or options from a screen, rotate the jog wheel and stop at the
desired function or option.
To accept the highlighted option, press <ENTER>. This may open another screen, as
per the Menu Map.
To activate or enable a selected option, press <ENTER>.
To return to the previous screen without changing the current option’s value, press
<MENU>.
DMX Operation The Legend 1200E Wash always operates in standard DMX mode (no “Slave,” “Auto,”
or “ID addressing” modes). The options in the DMX Operation section set the starting
DMX address and the DMX mode as well as show the fixture’s DMX configuration. To
access this section, do the following:
1) Press <MENU>.
2) Select DMX Functions.
3) Select the corresponding function as indicated below.
4 Press <MENU> to exit once you are done with this section.
DMX Address
To select the starting DMX address, do the following:
1) Select DMX Address.
2) Select a DMX address (001~512).
3) Press <ENTER>.
DMX Modes
To select the DMX mode, whether Basic (16 channels) or Advanced (21 channels), do
the following:
1) Select DMX Channel Mode.
2) Select Mode 1 (16) (Basic) or Mode 2 (21) (Advanced).
3) Press <ENTER>.
View DMX Values
This option shows the values for all the fixture’s DMX functions, from the first channel
(starting address) to the last channel (16 for Basic and 21 for Advanced).
1) Select View DMX Value.
2) Press <ENTER>(the values will show on the screen).
3) Scroll with the jog wheel to see all values.
4) Press <MENU> to exit.
Fixture Settings
The options in the Fixture Settings
section set the pan and tilt modes as well as the
blackout options. To access this section, do the following:
1) Press <MENU>.
2) Select Fixture Settings.
3) Select the corresponding function as indicated below.
4) Press <MENU> to exit once you are done with this section.
Pan Reversal This option reverses the pan angle assignments from 000 = 0º and 255 = 540º to 000 =
540º and 255 = 0º.
1) Select Pan Inverse.
2) Select Yes (reversed assignments) or No (normal assignments).
3) Press <ENTER>.
Continues on the next page

Operation
-14- Legend™ 1200E Wash User Manual Rev. 02e
Continued from previous page
Tilt Reversal This option reverses the tilt angle assignments from 000 = 0º and 255 = 270º to 000 =
270º and 255 = 0º.
1) Select Tilt Inverse.
2) Select Yes (reversed assignments) or No (normal assignments).
3) Press <ENTER>.
Blackout During Head
Motion
This option enables the blackout feature while the fixture head is moving (panning or
tilting).
1) Select Bl.o. P/T Moving.
2) Select Yes (blackout enabled) or No (blackout disabled).
3) Press <ENTER>.
Blackout During Color
Change
This option enables the blackout feature while the fixture is changing colors.
1) Select Bl.o. Color Change.
2) Select Yes (blackout enabled) or No (blackout disabled).
3) Press <ENTER>.
Lamp Settings
The Lamp Settings section comprises all the parameters that affect the fixture’s lamp
and its operation. To access this section, do the following:
1) Press <MENU>.
2) Select Lamp Settings.
3) Select the corresponding function as indicated below.
4) Press <MENU> to exit once you are done with this section.
Lamp On/Off
This option allows turning the lamp off and back on without having to powe
r cycle the
fixture.
1) Select On/Off.
2) Select Yes or No.
3) Press <ENTER>.
The lamp will turn on or off after pressing <ENTER>.
Immediate or Delayed
Lamp Strike
This option allows the lamp to strike immediately (Yes) or in delayed mode (No) after
powering on the fixture. Delaying the lamp strike reduces the inrush current.
1) Select State/Power On.
2) Select Yes (immediate) or No (delayed).
3) Press <ENTER>.
The “Ignition Delay” option on page 15 controls the delay between power on and
the lamp striking.
Lamp On/Off Remote
Control
This option allows the lamp to turn the lamp off and back on from the DMX controller.
1) Select Off Via DMX.
2) Select Yes or No
3) Press <ENTER>.
Lamp On When DMX is
Present
When enabled (Yes), this option turns the lamp on when DMX signal is present.
1) Select On if DMX On.
2) Select Yes or No
3) Press <ENTER>.
Lamp Off When DMX is
Absent
When enabled (Yes), this option turns the lamp off when DMX signal is absent.
1) Select Off if DMX Off.
2) Select Yes or No
3) Press <ENTER>.
Continues on the next page

Operation
Legend™ 1200E Wash User Manual Rev. 02e -15-
Continued from previous page
Cooling Mode This option determines the speed of the cooling fans, whether always high or automatic.
1) Select Cooling Mode.
2) Select High or Auto.
3) Press <ENTER>.
Ignition Delay
When the State/Power On option is active, this setting configures the delay before the
lamp strikes after power on.
1) Select Ignition Delay.
2) Select the ignition delay in seconds (000 to 255).
3) Press <ENTER>.
Lamp Dousing This option decreases the lamp power after the shutters/dimmers have been closed for
a configurable time to reduce the internal heat accumulation.
1) Select Low Power Delay.
3) Select the time delay in seconds (000~255).
4) Press <ENTER>.
Display Settings
The options in the Display Settings section control the operation of the fixture’s LCD. To
access this section, do the following:
1) Press <MENU>.
2) Select Display Settings.
3) Select the corresponding function as indicated below.
4) Press <MENU> to exit once you are done with this section.
Display Reversal
This option reverses the LCD orientation (180º) to read it upright when the fixture is
hanging from a truss.
1) Select On/Off.
2) Select Yes or No.
3) Press <ENTER>.
The lamp will turn on or off after pressing <ENTER>.
Back Light Automatic Off
This option determines whether the LCD backlight will turn off automatically after 30
seconds of control panel inactivity.
1) Select Back Light Automatic Off.
2) Select Yes or No.
3) Press <ENTER>.
Back Light Intensity This option selects the intensity of the LCD backlight.
1) Select Back Light Intensity.
2) Select 1~10.
3) Press <ENTER>.
Temperature Unit When enabled (Yes), this option turns the lamp on when DMX signal is present.
1) Select On if DMX On.
2) Select ºC (Celsius) or ºF (Fahrenheit).
3) Press <ENTER>.
Fixture Tests
The options in the Lamp Settings section control what tests the fixture will run. To
access this section, do the following:
1) Press <MENU>.
2) Select Fixture Tests.
3) Select the corresponding function as indicated below.
4) Press <MENU> to exit once you are done with this section.
Continues on the next page

Operation
-16- Legend™ 1200E Wash User Manual Rev. 02e
Continued from previous page
Auto Test This option sets the fixture to run the automatic test.
1) Select Auto Test.
2) Press <ENTER>.
The fixture will run a single sequence of tests to verify all its functions.
Manual Test
This option allows the operator to select which tests to run.
1) Select Manual Test.
2) Select a function from the list (1~21).
3) Set the value (000~255) for the selected function (the fixture will assume the new
function value, as if you had used a DMX controller).
4) Press <ENTER>.
5) Repeat steps 2through 4for the other functions.
6) When done with the test, press <MENU> (the fixture will go back to DMX mode and
all the manually entered values will become 000).
Fixture Information The options in the Fixture Information section control the fixture usage timers and show
the firmware version. To access this section, do the following:
1) Press <MENU>.
2) Select Fixture Information.
3) Select the corresponding function as indicated below.
4) Press <MENU> to exit once you are done with this section.
Fixture Operation Timer This option shows the time thefixture has been in operation.
1) Select Fixture use time.
2) Press <ENTER>.
The fixture will show the accumulated time of operation.
The Fixture Use Time is not resettable.
Lamp Operation Timer This option allows the operator see the fixture and lamp usage timers as well to reset
the lamp usage timer after changing the lamp.
1) Select Lamp On Time (the accumulated lamp usage time will show).
2) Select Exit or Reset Time (do this only after changing the lamp).
3) Press <ENTER>.
Firmware Version
This option shows the installed firmware version for each of its various microcontrollers.
1) Select Firmware Version.
2) Press <ENTER>.
Fixture Reset The options in the Fixture Reset section control the resetting of the various functions of
this fixture. To access this section, do the following:
1) Press <MENU>.
2) Select Reset Function.
3) Select the corresponding function as indicated below.
4) Press <MENU> to exit once you are done with this section.
Pan & Tilt This option resets the pan and tilt of the fixture’s head to their corresponding home
positions.
1) Select Pan & Tilt.
2) Select Yes (reset) or No (exit without resetting).
2) Press <ENTER>.
The fixture’s head will move to the pan and tilt home positions.
Continues on the next page